PecosPete

Kaosfere said "I now have this fix installable as a package." And I just want to say THANKS!

How do you actually turn off ATC in MSFS 2020 and not just the sound? I've updated my copy of P2A and with advice on here I got it working with msfs. However, I have chased every menu and sub menu in msfs and cannot find how to turn ATC off, turn the sound off, sure but not ATC itself. Or can it even been done. TKS

I wondered about this also so sent this question to MS: if I purchased MSFS2020 Premium Delux Upgrade Bundle thru my xbox pass, and latter cancelled my xbox pass, can I stil have/own the Upgrade bundle and can stil play??? Graciela M. Graciela M. 2319 Answers • 99% Helpful Hello, my name is Graciela, it´s nice to meet you, i´m a gamer and i´m here to help you with everything you need today. If you acquired the upgrade bundle through the Game Pass you will need to have the subscription active in order for it to work, as the license is attached to the subscription.

I wish someone could come up with a solution to this problem of the Carenado PC12 and the GTN750 not showing the VCDI in the hsi when powering up or in VNAV mode.Even though the VCDI doesn't show the autopilot still maintains the gs or actually the gp. I've had the VCDI operating properly many times but then for whatever reason it disappears.

Flaps-up Did you manage to get the Canadian charts installed and working, if so could you advise. Thanks

Thank you Jean-Luc, this has indeed fixed the mouse issue on my setup, hope others were as successful.

Just updated to xplane 11.21r2 and experienced the mouse wheel problem not allowing zoom feature with GTN750 installed. Remove GTN750 and mouse reverts to normal.Happens in C172, Corenado PC12 and probably all.But you can still turn knobs/levers by left click and slide up/dn. The mouse wheel still zooms within the GTN750. Poor Jean-Luc, just when he thought everything was stable with xplane for a while... Thanks for all your previous help. RXP GTN750 is certainly worth the effort. Also, if you use GTN750 in popout mode without it being in the 3d panel, then the mouse zooms as normal.

Just updated to xplane 11.21r2 and experienced the mouse problem with GTN750 installed. Remove GTN750 and mouse reverts to normal.Happens in C172, Corenado PC12 and probably all.But you can still turn knobs/levers by left click and slide up/dn. Poor Jean-Luc, just when he thought everything was stable with xplane for a while... Thanks for all your previous help. RXP GTN750 is certainly worth the effort.

With the help of RXP we fixed my install. Early we tried different drivers on my Nvidia 960 but as it turned out the driver in the Intel video 530 card was causing the problem. Switched to an older driver and all is fine. My laptop has 2 video cards, the slower Intel runs general stuff and the Nvidia for xplane, photo editing, etc.

Well, tried all the suggestions you made, including DirectX9 but no change at all. I hope there is something else we can try? Really don't want to give up.

Exactly the same thing happens with the ultra light. AppCrashView doesn't show any recent or pertinent events. Anything come to mind that I may try to troubleshoot?

Yes, I think both debug options are enabled, partial copy of RealityXP.GTN: ; enable video card log. debugValue = 1 ; display Garmin Trainer logs. LogTrainer = 1 This happens with all aircraft, 3d or 2d popout. Will try new ultra light and also install app_crash_view. Is there a way I can upload these various files to you or this forum? Thanks for sticking with me on this problem

First of all, thank you for the quick response. "It this happening only after you've pressed the 'button' and before the next screen shows up, or do you have time to see the next screen prior it fails?" No other screens ever show. It will sit at the initial screen forever until I hit 'continue' button, then immediately to blank screen. It will not fail until I hit the continue button. Also Task Manager tells me that the Trainer is running in 32 bit mode. Enabled additional error reporting & here is the contents of nxpGtnSim.dll ( still don't know how to attach a file here) 18/05/21 17:21:09.057 10144 - ] # rxpGtnSim64.dll version 2.5.1.0 18/05/21 17:21:09.056 10144 INFO ] 18/05/21 17:21:34.164 08196 INFO ] 18/05/21 17:22:52.712 02060 INFO ] GFX Debug: enabled. nxpGTN.xpl 18/05/21 17:21:06.233 10144 - ] # win.xpl version 2.5.1.0 18/05/21 17:21:06.232 10144 INFO ]

Edit Trainer ver 2.1.0.0 should read ver 6.41.1.0

Been trying to get this new Reality GTN750 to work in my Xplane 11-20. It fits nicely into the 3d panel of the Carenado PC12 for xp11, but the screen renains black/blank. The 750 powers up, touch to continue and the next screen with my email address comes up, touch the small area that turns blue and then the whole screen just goes blank. If turn off Avionics bus off & then on, the 750 powers up again and repeats the same process. The Garmin trainer seems to work just fine, although I don't understand the connection between the two, just that you need the trainer installed. Does it also have to running at the same time, I've tried this but it makes no difference. RTN750 ver 2.5.1.0 Trainer ver 2.1.0.0 rxpGTN.xpl 18/05/20 23:06:43.774 06768 - ] # win.xpl version 2.5.1.0 18/05/20 23:06:43.774 06768 INFO ] rxpGtnSim 18/05/20 23:06:46.569 06768 - ] # rxpGtnSim64.dll version 2.5.1.0 18/05/20 23:06:46.568 06768 INFO ] 18/05/20 23:09:00.138 04036 INFO ] Sorry cannot attach anything to this forum yet, or would have included Reality.XP.GTN I've read just about everything on this forum and am completely googled-out, any help would sure be appreciated,

I know this is an old post but if your are still looking to eliminate trees or roads, etc try: http://x-plane.parshukov.com/rendering-options-x-plane-11/ It is quite an amazing programe and should have been built into X-plane from the start. Enjoy

Dave Thanks for your help. I was saying release but the programe was hearing clearance !! Just tried it a couple of times and finally got the request for "release" to go thru. Amazing program, but a tough one to get use to, Thanks again Peter

To clarify: Peter Four Four Seven is cleared to Kilo Bravo Kilo Victor as filed Maintain Four Thousand Feet Expect higher clearances Two minutes after departure Departure on One Two Five Point Three Squawk Three Five Three Six; Peter Four Four Seven Readback Correct. Call for IFR Release when number one for departure. Peter Four Four Seven Ready for IFR Clearance; Runway Two Seven; Kilo Charlie Golf Charlie; Peter Four Four Seven your flight plan seems to be out of date. Please file a new one and call back for clearance. File your flight plan and try again. Peter Four Four Seven

TKS will try again with that info in mind

Can anyone explain how I can get by this: Peter Four Four Seven your flight plan seems to be out of date. Please file a new one and call back for clearance. File your flight plan and try again. Peter Four Four Seven I've reloaded/refiled but still get this message. thanks

Hello theskyisthelimit, All I did was d/l from the link kindly posted by Murmur. Didn't add any other png files nor added any other lines. You could try the same thing and then add the other mods & see what the result is. I might try the other mods but for right now am quite satisfied. Regards PecosPete & a special thanks to Murmur

Just d/l your https://drive.google.com/open?id=0B5fyJwRhjar5cDhXclgxRTFxdjg and using in xplane11 pb8 & works great. So much better than those charcoal clouds, Thank you PecosPete

Thanks Paraffin, I was hoping for an easy quick fix, will have to wait some time before I dare get into planemaker. Hope you are enjoying xplane11 as much as I am.

Which files would you have to edit to change the class of an aircraft? Some of the a/c are 'Unclassified" as it appears the class wasn't specified in the model. ie the C-130 & X-15 are 'Unclassified', why not in 'Military' ? Thanks