samer747

I'm afraid that the airline had removed all documentation for the 747 after retiring their fleet but I hope there is a copy some where, its very difficult to figure out the wiring of the monitor unit without diagrams.

Hello Gentlemen, I was able to get an LCD Monitor Unit that is used to view the cameras outside the flight deck by the pilots, this unit is attached to the aft section of the pedestal on British Airways 747 fleet, I was hoping if someone can provide me with a copy of the SSM / WDM or the CMM for the camera monitor system on BA fleet, this is an airline specific feature that is not available on other airlines. Without one of these diagrams I'm not sure how I can power it up, hopefully someone has a copy to spare with me, will be so appreciated. Regards, Sam

Dear Pilots, I need B747-400 flight deck drawings with detailed measurements for home simulator project, I have been collecting the actual flight deck parts for some time to eventually interface them into a full size simulator, I was able to find few drawings that some of the simulator builders measured from an actual aircraft however I still need more detailed drawings to build the exact aircraft size frame and windows, I will be installing actual flight deck panels and trimming, I just need help with the frame. I hope some of you whom had built a full 747 sim might be able to provide some good drawing for the frame construction. Best Regards, Sam

Gentlemen, I’m looking for Boeing 747-400 real throttle quadrant from a retired aircraft to covert to a home built simulator, there was one on eBay but unfortunately I had missed out on buying it. Can any one help me on where or how to find one ?? Someone had mentioned the boneyard but I don’t know where or whom to contact to arrange the process, is there a specific website for such thing or possibly online sellers. Please let me know if you guys might know something. Thanks, Sam

Yes, it did work, I turned OFF KLAS files from all Orbix FTX locations, looked good now. Thanks to all of you on Avsim forum, you guys are the BEST :)

Hi guys, I have a problem with leveling KLAS airport area with the rest of Vegas sceneries that I just purchased from FlyTampa last week, I disabled the airport from ORBIX victor setting but didn't help, this is the only airport that I'm having issue with. I have been contacting FlyTampa via their forum and with direct email contact but unfortunately they never get back to me or comment on the forum. I would appreciate if you guys can help me levelling the scenery if you have had a similar issue, I'm not good at digging into command programming, any detail help is greatly appreciated. Thanks

Hi guys, I have a problem with leveling KLAS airport area with the rest of Vegas sceneries that I just purchased from FlyTampa last week, I disabled the airport from ORBIX victor setting but didn't help, this is the only airport that I'm having issue with. I have been contacting FlyTampa via their forum and with direct email contact but unfortunately they never get back to me or comment on the forum. I would appreciate if you guys can help me levelling the scenery if you have had a similar issue, I'm not good at digging into command programming, any detail help is greatly appreciated. Thanks

The PMDG 737 aircraft different liveries don't show up when I start P3D V4.4, I see the PMDG default liveries only, I removed and re-downloaded different liveries but nothing shows up except for the default PMDG liveries, I have the PMDG B747 and PMDG B777 which both aircraft liveries show up with no issue, the issue that I'm having is only with the B737 liveries. Does anyone have this issue before or can help on fixing this problem? Regards

Hello, I updated my PMDG 777 to the latest build however right after the update when I load the aircraft it will load in the cold/dark cockpit and freeze, I can not click or move any switch, the aircraft is completely dead, I'm running P3D V4.3. When I reloaded the older version of my PMDG 777 the aircraft works fine it just stops responding once I update to the newer version. Any Idea of what might be wrong, has it happened to anybody else? all of my simm's add-ons are up to date and I never had any issue with PMDG before. Let me know please if you might have the same issue. Regards,

I did the steps you suggested to do but the a320 still crashed, I tried to run and fly it without the controls but it still crashed, after cleaning up some of the files per step 6 the sim did not recognize my chproducts yoke and rudder, I did try to repair install p3d but still does not recognize controls, to avoid any possible damage to my sim or computer, I would format my computer and reinstall everything back and forget about Aerosoft A320. Thanks for all of your support all on this issue.

I did down load the factory celebration app and was able to calebrate the controllers, it recognizes every bottom and every axis and it works fine when I fly different aircrafts.

Yes to the best of my knowledge, he asked me to send him some ( events error reports ) which I did. I'm not an expert when it comes to deep details of window operating system, files and sim networking. Unfortunately ☹️

Thanks Jimm, what you're saying definitely makes sense but I'm not expert on sim compatibilities or addons networking as far as which file does what, I really want it to work, and I'm trying to the best of my knowledge to figure it out, it might be a corrupt file or wrong setup. Yesterday I did start the A320 without connecting my flight controller (chProduct yoke and rudder) I was able to push in some button and try different views but once I did connect the controls few seconds later it crashed, so if the issue is related to controls how to narrow it down or figure out what causes it to crash?

I tried playing with A320 configurations and sim configurations, still crashes but I noticed that my CH yoke or rudder controls my have something to do with the crash, I recalibrated did some configs as well but still crashed, every other aircraft runs fine, Aerosoft support so far unable to figure out what's wrong, this will take me to another question what do you guy think of (flight sim labs A320x) vs Aerosoft A320? I'm thinking switsh to if Aerosoft won't get to work.

No, I don't have PSL spotlight installed. I'm using P3d v3.4 The gentleman from Aerosoft supports name Emanuel Hagen

Hello, I need some of your expertise on why my p3d crashes every time I run the Aerosoft A320, everything else runs and works fine, I have PMDG 747 v3 runs great, all other addons work fine except for the A320, I've been emailing back and forth Aerosoft customer support but is not helping, they suspect that something is wrong on operating system side not the sim in particular ( ntdll.dll ) files, but as I said every other addon aircraft runs fine. Do you have any idea what might be wrong? I have not been able to fly the A320 not even once yet. Regards

I disabled the intel graphics and forced the GTX1060 to run all of the graphics on the laptop, the sim ran great 👍 I really appreciated all of the feed back you guys had. Thanks

I noticed that the ( HD Graphics 530 ) is running my sim not the GTX1060 card that's why it can't handle the graphics, on the sim setting page all I can see under graphic card option is (HD Graphics530), how can I enable the GTX1060 or forse it to run the sim as primary card. All of the drivers are up to date.

Hello, I need help fixing my simulator running smooth with out any system crash, I'm running my P3D V3 on a gamming laptop ; MSI i-7 6700, GTX 1060 6GB, 16 Gram. P3D V3, PMDG 747 V3, Rex world airports, orbx global I tried different settings without any luck, I don't have lots of experience on this, i can not get the sim to run smooth, the scenery, the movements.... What should I do, is it my hardware or my settings, any ideas? Thanks