SebastianStorb

I have tested 2.3.8 in the meantime, but I am sure there is a connection between closing P3D and the panels.dll error (caused by RealityXP) As far as I know the Version 4.0 and 4.1.7 are coincidence and do not have be conform. RealityXP does not use .NET, but P3Dv4 uses the resources. Generally: Whenever there is a problem with an add-on, it also comes down to the .NET. I suspect that any ResorceX in RealityXP will not close properly when closing P3Dv4.1, because if RealityXP is not configured or disabled for an aircraft (with otherwise identical settings), the error will not occur.

I tested this Version but the error still occures I have the impression that RealityXP makes a mistake, e.g. by improperly implementing it in the .NET Framework. This .NET Framework error obviously occurs whenever an AddOn does not interact with P3Dv4 "cleanly". However, I'm not an expert. I am willing to give access to my computer to solve this problem.

New CTD event solved! CODE: SELECT ALL Name der fehlerhaften Anwendung: Prepar3D.exe, Version: 4.1.7.22841, Zeitstempel: 0x59d67e95 Name des fehlerhaften Moduls: panels.dll, Version: 4.1.7.22841, Zeitstempel: 0x59d67e09 Ausnahmecode: 0xc000041d Fehleroffset: 0x00000000000627da ID des fehlerhaften Prozesses: 0x3e8 Startzeit der fehlerhaften Anwendung: 0x01d368858aa72475 Pfad der fehlerhaften Anwendung: C:\P3D\Prepar3D.exe Pfad des fehlerhaften Moduls: C:\P3D\panels.dll Berichtskennung: 5b92a54f-1647-46c6-adae-8dc175f529ec Vollständiger Name des fehlerhaften Pakets: Anwendungs-ID, die relativ zum fehlerhaften Paket ist: CODE: SELECT ALL Name der fehlerhaften Anwendung: Prepar3D.exe, Version: 4.1.7.22841, Zeitstempel: 0x59d67e95 Name des fehlerhaften Moduls: panels.dll, Version: 4.1.7.22841, Zeitstempel: 0x59d67e09 Ausnahmecode: 0xc0000005 Fehleroffset: 0x00000000000627da ID des fehlerhaften Prozesses: 0x3e8 Startzeit der fehlerhaften Anwendung: 0x01d368858aa72475 Pfad der fehlerhaften Anwendung: C:\P3D\Prepar3D.exe Pfad des fehlerhaften Moduls: C:\P3D\panels.dll Berichtskennung: e7105848-7bcd-4a06-b379-c03c08dfbab5 Vollständiger Name des fehlerhaften Pakets: Anwendungs-ID, die relativ zum fehlerhaften Paket ist: CODE: SELECT ALL Anwendung: Prepar3D.exe Frameworkversion: v4.0.30319 Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet. Ausnahmeinformationen: Ausnahmecode c0000005, Ausnahmeadresse 00007FF97C7127DA Stapel: I was able to find the following error AND solve it: Panels.dll -> Cause: Reality XP is not installed in pop-up mode in the plane, but replaces a GNS430. When does the error occur? The error occurs when -Crash or accident of an airplane -when reloading or loading a new flight -when exiting the program (unsatisfactory) solution Reset Reallity XP Gauges in your plane first, then install Reality XP in the window popup mode in the plane. (Tested with Saratoga II by Alabeo) Could you fix it in your next update? (I am using rxpGNS2-FS v2.3.5)

You will not believe it and I can not believe it myself: This version has fixed all the bugs. There is no more crash and no error log. I've only tried it once, but I've never come that far. If I do not write anything here is the problem solved. I would like to thank you very very very very much!

It's all right, but it does not make any difference. Again: In Windows 10, there is the possibility, e.g. to move your own files to a different drive. So I moved these files to the drive D. I already mentioned above that I had moved these back to C: \ for test purposes but the error has occurred exactly like this. No your installer did that. Again: I DID THAT- I have also tested this: no difference I will try it later. Thank you a lot for your help!

Sorry does not help: See windows error log:

I know - you did tell me to try it. This is the current state: C:\RealityXP\ folder which includes my installer an RXP-GNS430-FS.lic file C:\ProgramData\Reality XP: (1) C:\Program Files (x86)\Reality XP\GNS Simulation\FltSim" various folders ("32", "64") (2) D:\Dokumente\Prepar3D v4 Add-ons\Reality XP GNS\add-on.xml D:\Dokumente\rxpGNS2.gau D:\Dokumente\rxpGnsSim.dll C:\Program Files (x86)\Garmin\GNS Trainer\GNS (3) C:\Program Files (x86)\Garmin\GNS Trainer -GNS -Manuals My Windows error log looks like this: (This is always the same error message)

Windows and all programs are on C:\ D:\Users\Sebastian\Documents\ was moved to d:\ with Windows board tools. No difference moving them back. The simulator is stable in the meantime when scenery and airplane can be loaded. However, the CTD continues to follow. 1.) A saved scenery / flight / airplane will be loaded with RealityXP is installed (if you do it again it can work or not at another time) 2.) By an accident, the RealityXP aircraft is damaged and the simulator detects the damage (and wants to restart the situation) 3.) Attempt to change to another aircraft (as soon as before or after a machine is equipped with Reality XP). 4.) P3Dv4 is terminated after a flight with a Reality XP machine. No problem in (4) if you delete sysnand

It is installed on c:\ Have you have misunderstood something? Please look here: c:\RealityXP and

My fear is that the software runs only error-free, if both program parts (GNS 430 AND GNS 530) were installed.

No

Q1) Is it ok, that the Garmin Trainer can not be empowerd, if you open it without P3D? I can open it, update the required data under WFDEprdct.exe. But i is not possible to empower it with the left upper know. "Press the Power/COM vomume knop to power on the unit. The other knobs (i.g. HDG or SPEED) can be used. BUT the MASTER Switch is offline. Q2) Could it be, that i have the problems, because of having a single GNS430 installation (and did not buy both GNS430 & GNS530)? Was it tested with a single version computer?

Yes i uninstalled, rebooted and installed the new version. Sorry - did not help! :-(

I tried: but no success. The GNS error is still there! shows the same error logs!

Thank you very much for your advise! No - Bevore (09.09.2017) I had only one installed: But after installing today, rebooting and reinstalling RealityXP I have the same RealityXP errors. The .NET Runtime error comes only one time since i can see up till now. THANK U - Did I install enough now?