jdpilot

It now has been 2 weeks since this thread was started. On the website it has the hours of support which really hasn't been the case! Seems like there is no tech support. Haven't heard from RXP in a while. Call this Tech support?????? Not a very satisfied customer here!!!!!!!

That doesn't help us now! Can we get a link to the old version that works? Bought a program that doesn't work and stuck with something that is not working right.

Maybe RealityXP can put the older version V2.3.8 up for download until they figure this thing out

I just bought the program and new to ReaxityXp so nothing to rollback too. It has been very frustrating the last week trying to get this thing to work. Glad I'm not alone though. I hope this thing gets fixed. Looks like a nice program. Any idea how I can get an older version?

I am having the same problem in Legacy FSX/Acceleration. Reality GPS530 will not connect to the Autopilot. If I manually fly the aircraft all instrument and GPS indications are working fine. Just won't hook up to the autopilot. I even uninstalled FSX and did a fresh install with the same problem so I know it is not the SIM1.dll file. Must be a bug in the program that is not allowing the GPS to link up to the Autopilot. Also with in the INI file the CDI key to NAV/GPS switch if true the NAV\GPS will only switch to GPS and when switched to NAV returns to GPS not allowing it to go to NAV. INI File [GNS_530_1] ; is the master device if true. MasterDevice = true ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting percent (0 to 100) Rheostat.Display = 100 ; integral lighting percent (0 to 100) Rheostat.Buttons = 75 ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course if true. LinkCrs = true ; connects HSI OBS to GPS if true. LinkObs = true ; connects GPS to VOR if true. LinkVor = true ; connects GPS to Autopilot if true. LinkOto = true ; connects CDI key to NAV/GPS switch if true. AutoNavGps = false ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = false ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = false ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; use legacy mouse (left CCW, right CW, middle Push) (override instances settings) UseAltMouse = false ; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars). UseLegacyVars = false ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GNS_530_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = false ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0

I am having the same problem as Gilles but running legacy FSX/Acceleration. I uninstalled the Sim and did a fresh install. Installed the RealityXp GPS 530. It will not connect to the Autopilot. I did noticed while flying to an airport and executing an RNAV approach manually that the flight director is dead center all the way (Cross Hairs not showing left or right of course and glideslope info showing level) while the CDI is showing accurate information including Glideslope info. The GPS is not linking up to the flight director for some odd reason... Hence not hooking up to the Autopilot. John

Hello Gilles, You say it is working now after replacing the sim1.dll? If so can I get a copy? Thanks

Thanks for the reply.... Have tried it on normal still no joy on getting the GPS to Link up to the Autopilot. Have also tried to run FSX normally without the Multicore and still the GPS does not link up to the Autopilot commands. There is not connections there. The original GPS links up to the autopilot and will fly the aircraft. Could it something in the rxpSimCom32.dll or sim1.dll????

I am having the same problem. Just flew an LPV approach manually because the GPS will not lock with the Autopilot. The Gps functioned like it should. The autopilot control head work as is should too but would not couple with the GPS. I am an ATP rated pilot and fly with this system every week so I know where the switches and knobs should be. The GPS in not linking up with the autopilot. See my post for more detail. Need Help solving this problem.... Where is Tech Support????

Ok got it to run at a good speed. I am running Multicore Environment Advanced and had The FSX set to High on Priority Class. Had to back off to Above Normal. Now the Aircraft will not lock on to the course with the nav/gps switch in gps mode. The aircraft needles and cdi are hooked up to the GPS and displaying properly. I am operating windows 8 and FSX with Acceleration Pack. Have read something about a bad sim1.dll Is this possible? Must be something with it linking up. The ini file is set up properly and the report files look good. Here is the INI file: [GPS_500_1] ; is the master device if true. MasterDevice = true ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting percent (0 to 100) Rheostat.Display = 100 ; integral lighting percent (0 to 100) Rheostat.Buttons = 75 ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course if true. LinkCrs = true ; connects HSI OBS to GPS if true. LinkObs = true ; connects GPS to VOR if true. LinkVor = true ; connects GPS to Autopilot if true. LinkOto = true ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = false ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = true ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = true ; updates Simulator GPS flight plan if true. LinkSimGps = true ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; use legacy mouse (left CCW, right CW, middle Push) (override instances settings) UseAltMouse = false ; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars). UseLegacyVars = false ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GPS_500_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = false ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 rxpGNS2.gau.log 18/02/15 20:27:20.653 02460 - ] # rxpGNS2.DLL version 2.3.9.0 18/02/15 20:27:20.653 02460 INFO ] rxpGNS2.menu.dll.log.log 18/02/15 17:03:58.064 02772 - ] # rxpGNS2_menu.dll version 2.0.7.0 18/02/15 17:03:58.345 02772 INFO ] edit panel: C:\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Bombardier_CRJ_700\panel\panel.cfg rpxGnsSim.dll.log 18/02/15 20:27:21.573 02460 - ] # rxpGnsSim32.dll version 2.3.9.0 18/02/15 20:27:21.573 02460 INFO ] 18/02/15 20:28:36.125 03988 INFO ]

Hi, The GNS530 loads, starts up and runs while aircraft is on the ground. I can load and save flight plans and everything seems to work as advertised. Once it starts to roll the 530 becomes very slow. Tried to find help on the forum but cannot find an answer. Thanks