obsoletepower

17 hours ago, fsxkitty said:

“25,001 – wishing everyone a safe and wonderful start to the holiday season!”

 

Did Microsoft just make a reference to this thread??

HA! I was wondering what that number was in their post......🙃

25 minutes ago, n4gix said:

It's always a dangerous practice to set goals publically and then find yourself unable to meet them. It's obvious that this is what ASOBO is running into. Patience will be required so they can do it right, even if not when projected.

Yes I fully agree with you but I would have at least expected them to say SOMETHING about the T1A release even if it would have just been a one liner. It's not like they don't know how much anticipation there is to test the single-most revolutionary piece of simulation software that any of us have seen. I am 100% behind them to take their time but early on when they substantiated their transparency and dedication to the simulator community, I would expect that to extend to the test builds as well.

10 minutes ago, Krakin said:

Well they're a bit late will this week's update. I wonder if saying the next update would be today was a mistake 😂

I read on another forum that they changed the update schedule to Fridays instead of Thursdays.

16 hours ago, kiek said:

That feature has been removed from PSXT since version 13.7. See the release notes.

Note: you can still download 13.6.  Take the download URL of 13.10 and change 10 into 6.

Ohhh I see......I thought I was going crazy! Thanks for clearing this up for me!

Hello folks,

I am having a bit of an issue. I have been running PSXT with no issues in the past but I recently built a new computer and after installing and re-configuring P3D 4.4 with all the add-ons, I came to the PSXT installation. I am not running Real Traffic, just wanted to have some parked aircraft at the gates but no matter what I do, the parking % remains blank. I am running PSXT 13.10 locally, have installed FLAi v.15 and confirmed that PSXT has a connection to P3D by the green bar at the top of the PSXT window. I have posted my log file for reference below.

Quote

Wed Mar  6 01:02:30 2019 (utc)
version 13.10
PSXT (64 bit)
for Prepar3D v4.4

*************************************** parameters ***************************************
GROUND_TRAFFIC=false
ALWAYS_ON_TOP=false
COLLISION_LIVE_PARKED_GND=true
LOG_PARK=false
LOG_MATCHING=false
HEAVY_MIDDLE_AIRCRAFT=true
ADD_FLIGHTPLAN=false
LIGHT_AIRCRAFT=false
HELICOPTERS=false
AUTO_MODE=true
LIVE_IF_USER_AIRBORNE=false
COLLISION_USER_GND=true
MAIN_WINDOW_X=-936
MAIN_WINDOW_Y=126
LATERAL_RANGE=40
UPS=25
VERSION_CHECKED_AT=not yet determined
PROGRAM_VERSION=13.10
INSTALL_PATH=C:\PSXseeconTraffic
LIVERIES_FOLDER=installation_liveries
FLIGHTPLANSFOLDER=
AIRPORTS_FOLDER=installation_airports
BLOCK_CALLSIGN=
******************************************************************************************

Reading airport's data from airport files in "installation_airports"
9914 airports found
Searching for AILGenerator at this PC
PROGRAM_VERSION=4.8
INSTALL_PATH=C:\AILGenerator
OUTPUT_FOLDER=liveries
Searching for ParkPosGenerator at this PC
PROGRAM_VERSION=9.5
INSTALL_PATH=C:\ParkPosGenerator
OUTPUT_FOLDER=airports
Initializing server at port 10747
Waiting for FlightSimulator to connect ...
Waiting for data provider to connect to PSXT ...
Lockheed Martin  Prepar3D  v4 connected

Any help is highly appreciated!

On ‎2018‎-‎04‎-‎17 at 6:32 AM, WarpD said:

Battery1Switch, BatteryElecPower and AvionicsElecPower LVARs are not default sim variables.  By default the G1000 looks at MASTER_BATTERY and AVIONICS_MASTER_SWITCH which are default sim variables.  I will check with A2A regarding this as there seems to be something that isn't set up quite right.

Ed,

Can this be changed as in is there a way to change the variables the G1000 looks at? The AVIONICS_MASTER_SWITCH does change when I toggle the switch but ELECTRICAL MASTER BATTERY does not.

11 hours ago, WarpD said:

Have you confirmed that the sim's variables for battery and avionics power are off?  I am wondering if something is triggering them on behind the scenes.

Hi Ed,

Thank you for your suggestion. I have confirmed that Battery1Swtich, BatteryElecPower and  AvionicsElecPower LVARs are reading 0 as all master switches are off. It's almost like the G1000 is not reading the variables from P3D.

Hello everyone,

I am trying to figure out an issue I have had for some time with my setup. I am running the G1000 PFD and MFD screens in popup windows so they can each be displayed on individual screens but the G1000 remains powered on no matter what state the Master switches (Battery or Avionics) are in. As soon as the aircraft is loaded the G1000 powers up. I have an Advanced license because I am using hardware to interface with the sim and the aircraft I am using it in is the A2A C182. I should mention that I do have the "Accusim=YES" parameter in my G1000.ini file.

Any help will be greatly appreciated.

So it’s been almost a year since P3D v4 was released and still no updates from Mindstar. Nearly all developers for P3D have moved to 64-bit by now including direct competitors......This is more than disappointing to say the least. Not so much the lack of 64-bit versions but more so the lack of updates from the developers at Mindstar.