Captain Joe

Thank you very much for your reply Dave! I will try this fix the next time it happens and I see where I can verify things via the Taxi button you mentioned. I have been noticing allot of regional airports aren't consistently lining up with my navigraph charts and thought this might have had something to do with it.

Using XPlane 12 with Windows 11 and everything worked as usual obtaining ATIS all the way until approaching Runway 25. There was no hand over to the tower controller approaching the hold short line of the runway. Instructed ground that I was holding short of runway 25 and was handed over to the tower controller. Called the tower with the phrase ready for departure runway 25 and was handed back to the ground controller for taxi instructions. Tried using Just say it with the same results. Just kept getting transferred back and forth between Ground & Tower controllers and was unable to obtain a takeoff clearance. I couldn;t figure out how to attach me log file but copied it to my desktop for safe keeping until you can let me know how in case you need it. I hope you can assist in letting me know if I was doing something wrong although I am a seasoned pro using the software or if it is indeed a bug when it comes to this particular airport. Thank you in advance for any assistance you can provide.

Hello again Pete, flew a flight yesterday and yes my FMS was showing the current cycle. Looks like the problem is only affecting P2A at this point.

Thank you for the explanation Dave...very much appreciated! To answer your question Pete, yes my path within Navigraph is set to the correct directory if this is your question. I'll check my FMS on my next flight and update.

Thank you very much Grand & Pete! Just tried it and it worked. Hopefully this will be fixed by the next cycle otherwise will use this method again that is if I can remember! Lol

After updating my AIRAC using the Navigraph FMS Data manager to 2307 and starting Pilot2ATC the AIRAC cycle is coming up as 2101. I decided to uninstall Pilot2ATC along with my original folder on my C drive and reinstall a new full version restarted Pilot2ATC and the AIRAC came up as 1801 which is what I expected. I exited out of Pilot2ATC when back into the Navigraph FMS Data Manager manually pointed the update to the new folder created and upon reopening Pilot2ATC it is still reading AIRAC 2101. The current AIRAC is 2307 so I'm not sure if it has been updated. Please let me know if anyone else is experiencing this issue or how I can correct something on my end if I'm doing something wrong. Thank you in advance for any assistance you can provide!

Is anyone having luck getting the XPLink plugin working on a Mac with Windows 10 on bootcamp? I'm receiving an error message "No connection could be made because the target machine actively refused it 127.0.0.1:48007" from within the Pilot2ATC logs. Contacted Microsoft and their support advised that actively refused means the port does not exist. Not sure if this is a Windows problem or Bootcamp problem at this point or router issue. Have spent allot of time trying to solve it for anyone else having this issue with absolutely no success. I'm hoping I'm not alone. Any help from anyone else using Bootcamp who have found a workaround or just plain got it to work is very much welcome & appreciated!! Thank all of you in advance, Joe

Thank you Dave! I just emailed the log files to you. There were 10 of them and hopefully I did it correctly...your directions were very easy to follow. I am familiar with viewing hidden files and always have the option checked. Thank you for the heads up though! Have many year's of experience in dealing with Windows files. Lol

Also the video explaining out to add AI traffic without taking any frame hits is X Plane 11-Pilot2ATC-Part I-The Review|How to set up:AI Traffic-ATC Voices-Flight Plan and more...on YouTube. The instructions for adding the AI folder is a little more than 24 minutes in.

Thank you Dave! Put back World Traffic and World Traffic Radar and ran P2A as Administrator. It took a bit longer to fully connect but unfortunately with the same results. Decided to take World Traffic back out since I just read they are working on an upgrade for Vulcan. So I added back 8 aircraft in X Plane tried connecting P2A with the same results.

Thank you Dave! I removed both Python plugins as you advised with unfortunately the same results. So it doesn't look like the plugins are the issue at this point. I also do not have any AI aircraft being added at this point. Just have the AI folder in the aircraft folder for XPlane. This was mentioned in one of the video's I found on YouTube for Pilot2ATC to set things up. Trying to think of anything I can on my end too.

Thank you again for your reply Dave! I deleted the XPLink plugin then checked the Slow XPLink option and reinstalled it. I then removed all plugins except CIFP (couldn't access my desktop without this one), Plugin Admin, Python Interface, PythonScripts (knew I needed both of these to run Pilot2ATC), XPLM.framework, XPUIPC & XPWidgets.framework, XPLM_64.dll, XPLM_64.so & XPWidgets_64.dll and received the same results. Received an error during loading XPlane that I needed to add back the XPLM.framework & XPWidgets.framework. I of course knew I shouldn't remove the XPUIPC. I also decided to use a Laminar aircraft (MD 80) just in case one of my addons was the issue.

Thank you again for your response Dave! Yes, the folder is there in my plugins folder. The error message is "unable to connect to P2A_XPLink plugin. Normal AI traffic will be used."

Thank you very much for your reply Dave! XPUIPC is installed. Other plugins include World Traffic 3.0, World Traffic Radar, Better Pushback, Avitab, AVS, Fly with Lua, terrain radar, x-camera, XP Realistic, XPGF, Scenic Flyer, Web FMC, Volanta Plugin, XP Widgets framework, XPGF, xjet, along with python interface & python scripts.

I am new to Pilot2ATC and currently trying it out during the trial period. I am running it on an IMac Pro using Windows 10 on Bootcamp. I am using the most current version of 11.55 of x plane 11. I have set AI to zero and have the box use XP 11.5x traffic checked and installed the xplane xp-link plugin to my x plane 11 root directory. The Slow XP Link is unchecked. I have left the IP address at 127.0.0.1 since I am running xplane and Pilot2ATC on the same computer. Any assistance you can provide is greatly appreciated!