Erickscc319

Good morning dear Manuel, here I go. 1. The SPJC_ADEX_ADE.bgl file is 143 kb (less than 1 mb). 2. Yes I am using Microsoft Flight Simulator 2 + patch 1 + patch 2 ( FSX SP2) 3.My speech recognition engine is working perfectly I configured the language in Peru as (SP-ESP) for Spanish. 4. I am running Windows 10 pro. Regards. Erick.

Hi dear Manuel... Here I send you the requested files: (I made a round trip flight SPJC - SPST - SPJC) - I am sending you two .Log files: One is just after the moment my FSX froze after landing in Tarapoto (SPST) and the second one is just after the moment the Fsx froze after landing in Lima (SPJC). - Also my .INI file when my last configuration and also the Screenshot. https://www.dropbox.com/scl/fo/ubk2v6gfbuyb83zqgjos8/AByCFqqpwDjF1VQDFQaqFJw?rlkey=3522aofy93upe8j6ptpzwxjss&st=bq5nsxoc&dl=0 Waiting for your answer.. Cheers. Erick.

Hi friend. Hope everything is going well. Here are the requested files: https://www.dropbox.com/scl/fo/ubk2v6gfbuyb83zqgjos8/AByCFqqpwDjF1VQDFQaqFJw?rlkey=3522aofy93upe8j6ptpzwxjss&st=ggexgmu8&dl=0 As I told you... It seems that UGCX is all the time running in the backcround scanning the airport because it does the fsx less FPS and sometimes it freezes the fsx anytime I arrive to an airport or when I am on approach Waiting for your answer. Erick.

Hi Manuel...for sure, where can I locate them ?

Hi guys I Just bought the UGCX V2.6 (very nice addon) to complement it with GSX, but I found a bug. Everytime that I arrive to an airport Fsx freezes for about 5-10 seconds, this started since I have installed the UGCX, it seems that UGCX is reading the sceneries all the time (on approach, on landing, when taxiing, et ) and this is why this happens. My question is, there is a way to disable this? May be in the .ini file Regards. Erick from Peru

Hi guys I Just bought the UGCX V2.6 (very nice addon) to complement it with GSX, but I found a bug. Everytime that I arrive to an airport Fsx freezes for about 5-10 seconds, this started since I have installed the UGCX, it seems that UGCX is reading the sceneries all the time (on approach, on landing, when taxiing, et ) and this is why this happens. My question is, there is a way to disable this? May be in the .ini file Regards. Erick from Peru

Thanks to you for be with us, and work in improve this beatiful bird. Hope to solve this little issue soon. Anyway, if You need some help to improve this beauty, contact me. Erick.

Good evening Flysimware Team. After doing 6 short flights between SPSO and SPJC and following some Ark’s recommendations. I think I have found the culprit of the problems with programming a second flight plan. - First the software I have: FLYSIMWARE LJ35 V4.4 FMS EXPANSION V1.6 (with last airac cycle) FSX SP2 - Now I will detail the 6 flights that I made: 1- SPSO – SPJC - ROUTE: SPSO/RWY4-ASOXI-SPJC/RWY16L (no SID/STARS, no aPPS) - No change in weight (trough the PayloadManager) - No Vnav trough FMS - Started with engines running Result: Everything as spected, after landed I left the runway 16L, went to my parking position and stopped the engines, opened the door and turned off all the systems as stated in the checklist card and programed the return flight to SPSO, everything ok. 2- SPJC – SPSO - ROUTE: SPJC/RWY16L- ASOXI- SCO- SPSO/RWY22 (no SID/STARS, no APPS) - Sarted with engines off (from the previous flight) - No change in weight (trough the PayloadManager) - No Vnav trough FMS - Gpu connected. Result: Everything as spected, after landed I left the runway, went to my parking position, turned off engines and programmed the next flight back to SPJC, everything ok. 3- SPSO - SPJC - ROUTE: SPSO/RWY22 - KOPRA1 (departure)- ASOXI- ESEDI2(arrival) with APP ILS16L –SPJC - No change in weight (trough the PayloadManager) - No Vnav trough FMS Result: Everything as spected, after landed I left the runway, went to my parking position, turned off engines and programmed the next flight back to SPSO, everything ok. 4- SPJC - SPSO - ROUTE: SPJC/RWY16L – ASOXI2 (departure)- ASOXI- GEBED3(arrival) –SPSO/RWY22 - No change in weight (trough the PayloadManager) - I programmed the VNAV trough the FMS (this is what I usually do in my flights to know when to start to descend) so I programmed my first waypoint GEBED at 7000 feet with a descend profile of -3000 ft/min. Result: After landed, I went to my parking position and I COULD NOT program the RETURN FLIGHT TO SPJC (the first waypoint to the return flight was not shown in magenta color and not in the HSI). Notice that the only change I made was to program the VNAV into the FMS. LEFT THE SIMULATOR – ENTERED AGAIN. 5- SPSO-SPJC - ROUTE: SPSO/RWY22 - KOPRA1 (departure)- ASOXI- ESEDI2(arrival) with APP ILS16L –SPJC - I changed the weight, adding 6 passenger and some cargo, and modifying the amount of fuel (trough the PayloadManager). - FMS FUEL PAGE also was changed to add the 6 passengers and the cargo which was loaded trough the Payload M. - No Vnav trough FMS Result: Everything as spected, after landed I left the runway, went to my parking position, turned off engines and programmed the next flight back to SPSO, everything ok. 6- SPJC-SPSO - ROUTE: SPJC/RWY16L – ASOXI2 (departure)- ASOXI- GEBED3(arrival) –SPSO/RWY22 - I changed the weight, adding 4 passenger and some cargo, and modifying the amount of fuel (trough the PayloadManager). - FMS FUEL PAGE also was changed to add the 6 passengers and the cargo which was loaded trough the Payload M. - No Vnav trough FMS Result: Everything as spected, after landed I left the runway, went to my parking position, turned off engines and programmed the next flight, everything ok. *In every route I used the DELETE FPL button to enter a new flight plan. _______ So, as you can notice, the fourth flight, in wich i programmed the VNAV trough the FMS was the only flight in wich I could not programm a second flight plan, I tried entering also other flight plans, waypoints, etc. without result. Waiting for your answers. Regards. Erick.

In adition to the given information: I bought the LJ35 and FMS EXPANSION from the FLYSIMWARE page: https://flysimware.com/, then i received a link to download it from my Email. Also with the last Ayrac Cycle (2408, wich is current until september), the FMS shows a yellow line in the main page *DATABASE EXPIRED*. Regards. Erick.

Hi Ark. Thank you for your reply, really apreciate it. As i stated above I have tried with: -Other airports, -Reinstalling FMS and Aircraft. -Updating to the last Airac cycle. But nothing seems to work , I don´t know if it is something from mi FSX. Every flight plan seems to work with the first load but not for a second load. I enter the flight plan directly from the FMS i don´t use default FSX flight planner. As I asked to the Flysimware Team, ¿Could you send me by private message or to my personal E- mail a link with the version of the FMS expansion pack that you have installed in your simulator?. I will try to install it and fly again. Waiting for your reply. Regards. Erick.

Hi Flysimware team. Thank you for your reply, really apreciate it. I have tried with: -Other airports, -Reinstalling FMS and Aircraft. -Updating to the last Airac cycle. Nothing seems to work 😞 , I don´t know if it is something from mi FSX. Every flight plan seems to work with the first load but not for a second load. I enter the flight plan directly from the FMS i don´t use default FSX flight planner. ¿Could you send me by private message or to my personal E- mail a link with the version of the FMS expansion pack that you have installed in your simulator?. I will try to install it and fly again. Waiting for your reply. Regards. Erick.

Is it really?. I bought an airplane from your page, then bought the " GREAT FMS expansion" and your only response is: I don't use Fsx/P3D anymore. So, what can I do?, nothing is going to happen?. Can You refund my money?, because i don't need a failed airplane, i pay for an airplane that i can use, no for one wich is going to be stored. If You don't support this product anymore why are You selling it?. It is really frustrating. Erick.

Hi FSW I can not program a second flight plan after landed in the FMC. Any solution ? Regards. Erick

Hi Ark It could be the AIRAC CYCLE UPDATE? Regards. Erick.

Hi Ark I have been tried it, but nothing works, just reloading the planes again, it is not possible to solve that bug? Regards. Erick.

Good Morning Ark. When i reload the airplane everything goes well, but, I lost my actual weights and configuration (fuel for the return flight, cockpit configuration, and everything ☹️). Please your help. Regards. Erick.

Any help please?

Hi, I have a problem programing a second flight plan into the FMS. 1. I program de 1st flight of the day as usual, everything good. 2. After landing i try to program de 2nd flight ( the return flight ) (ROUTE: SPJR-MANPA-BOBUG-ATATU-ATATU3-SPJC), I can enter everything but in the HSI display not rute displayed, it is displayed just since ATATU TO SPJC), not route showing from SPJR to ATATU. In the FMS is colored with PINK the waypoint ATATU (MANPA AND BOBUG are green colored, as if my first waypoint was ATATU). I am using last fms and aircraft versions for fsx. Regards. Erick.

Hi. I have a question regards if is it possible to insert coordinates for custom waypoints along my route?. I have the FMS Expansion and I don't know how to enter it ( it is not in the manual neither). And if it is possible wich is the format for example with this coordinates: S0714.5 W07624.9 Thank You. Erick

Hi Hi- I think it was a problem with an A2A (Accusim) C172 wich I installed. Now without this airplane everything works fine. Thank You 😃 Erick.

Thank you for your quick answer AI. UPDATE: I made a completely restart ( i am using FSX version), i dind't install nothing (just the FSW L35 V4.4 + FMS EXPANSION). Entered in the FSX, started the FSW L35 for the first time and everything works fine (Cabin Pressure Knob full movement), closed FSX, enter again (without any change) start again the airplane and the Cabin Pressure Knob get stuck. :C any idea please?. I am using FSX V2 Regards. Erick.

Hi Everyone. First of all, thank you for this amazing bird. I have a problem with the Cabin Pressure Knob, when I just install the product, everything goes fine, but after install a new repaint (making the modifications in aircraft.cfg for manually add my repaint) the Cabin Pressure Knob get Stuck, i can rotate it to the left (for higher altitudes) but not to the right (it remains at 350). I have the 4.4 version and also bought the FMS expansion. Waiting for your answer. Regards from peru. Erick-

Hi, one question, how can I enter a Manual waypoint to My approach ? ( I mean coordinates) Thank You in advance Erick