Search the Community
Showing results for tags 'home'.
Found 5 results
-
I thought I'd share my current project with you guys to both share my excitement and to also perhaps get some input from others of you who have ventured down the same path. I've decided to fulfill my lifelong dream of building my own home cockpit. I'm not going off of any plans whatsoever, this has been the product of years of looking at other folk's simulation setups and months of talking over designs with a friend of mine who's lending me a hand in the construction of this. I like going the "no plan" route because it gives me the opportunity to customize the thing to exactly what I am desiring. So, here' goes. Our first decision was that this thing needed to be modular and relatively easy to disassemble in the event that I should move. I was finally building this thing, I sure as heck wasn't going to want to leave it behind if we ever had to move. So, we came up with a plan that would include essentially 7 components. The 4'x8' base (on castors to make it easy to move around the floor should I need to do that), the back section which is structural, but also doubles as a convenient shelf, the seat box to which the seats will be bolted, the "desk" who's only real job is to support the instrument panel, but also double as a surface for keyboard/mouse when I need to do real work, the instrument panel console, the display assembly (which will also double as the front wall of the simulator, and finally the ceiling to help enclose the whole thing. All of these things will be bolted together with a few bolts which should give it strength but also allow for simple dissasembly. on of my concept drawings (I'm certainly no artist!): The base: The back framed in, and seat box built: a temporary "desk" to figure out spacing and measurements: desk is built, and front display wall is framed in: and this is where I'm currently at. My friend is working on the instrument console panel using MDF to built up a glare shield and the curved panel where the instruments will go. This is going to be made in such a way that it is easily removed from the cockpit so the thing can be used for other gaming or work purposes. I am planning on using a monitor behind the yoke, built into the instrument panel, to display the actual instruments. I've got a saitek radio panel and am considering other saitek panels, just haven't decided what I really need yet. Thanks for having a look! Jeremy
-
Hi all I hope you can help a complete newbie here. I am looking to build an overhead panel for the Aerosoft Airbus A318,A319,A320,A321. I have a lot of questions to ask you all. First off, for switches like ON OFF am I right in using SPST switches? E.g. landing gear Secondly, for switches such as, ON AUTO OFF. What switches do I use? Links? Does the full version of FSUIPC come with the mouse macro function? If so does it work with the Aerosoft Airbus? Also, does anyone have any links to a useful FSUIPC video using the mouse macro and the ON AUTO OFF switches? These are all the questions I can think of at the moment, although im sure there are many more to come Thanks a lot! I'd appreciate the help!
-
As some of you know, I have been I England and France this past week. Well I'll be back in good old Memphis, Tennessee soon enough, but I wanted to share with you some of the thoughts I have had while I've been away. First I want to say that if you ever need to come up with new development ideas, just travel. Your brain just needs to be take. Away from the computer screen sometimes. Really. Here's the plan for the future of my development: I want to link up my projects (Chase's MD-80) with my organization (Midsouth Virtual Air). I have renamed MSA to Midsouth Virtual Aviation in order to accommodate for this move. I want to do this so I can have a development group behind me. For now, it is just me though. I will discuss MSA in a later post. I want to start projects for FSX. I don't know exactly what I can do yet, but I'm pretty optimistic about future FSX development. I MAY try to make an FSX version of the MD-80 if I can port my model over easily. I don't want to rebuild the whole thing. We will see. I am also learning Simconnect, so that will help me develop programs as well. I'll try to keep you posted on the status of the project and of MSA as best I can. Soon my website will be back up and information can be found there. Thanks, Chase
-
hi guys I am new to flight sim. I am interested in passenger aircraft simming, specifically boeing and airbus. I am trying to setup a home sim system and would appreciate your advice on the hardware, controls and the overall system for FSX. I don't want to spend too much money on that and would be willing to spend 20 000-25 000$ for the complete system including pc, audio, monitors. For hardware controls I war to focus now on yoke, throttle and pedals. My questions: 1. Which are the most realistic throttles for boeing and airbus? Should I really spend more money on motorised ones or go with non motorised ones? 2. Which are the most realistic yokes for the same aircrafts? Same questions 3. Which are the most realistic pedals for the same aircrafts? 4. Which frames are advisable if I want to have at least 3 monitors and one touch monitor (for simulating panels, switches and other controls)? 5. I really want to have all system mounted on a motion system. Which 3 and 6DOF motion systems are good and budget ones? Is it possible to install column yoke and throttle on them? I would really appreciate your overall advice on such a system to me, as a newbie. Any suggestions and thoughts are welcome.
- 6 replies
-
- hardware
- controllers
- (and 8 more)