Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

stuttering in FS2002 with ActiveSky!?

Featured Replies

Hello,At the moment I'm realy dissapointed about ActiveSky.Everytime when AS update the weather, FS stutters!Its no problem when your high in the skie. But when taxieng or landing its something else.ThanksKappa[system]XP ProAMD XP3000+ CPU512MB DDR (A) [addons]FSFlightMax, FDC, SB, DEFAULT CLOUDS ON 65%

Kappa,Sorry you are having troubles. We know some users experience this, and we are working on it. Try running AS minimized to the task bar, turning down some sliders, and make sure force idle priority is checked.Hope this helps,JimActiveSky Support

Thank you, but...huhhh...wich sliders???1)my taskbar is minimized2)idle is checked3:my system works perfectly with very high framerate's! It drops only when AS is updating the weather!I never seen that before by other WX generators (free or with payment)!...and I uses a lot last 7 years!Why the heck should I lower my FS sliders???....strange support in my opinion?But thanks for your uhhhh...how will I call it "HELP"?Kappa

  • Commercial Member

Hello,Which version of ActiveSky are you running?-Damian[table border=0" cellspacing="30" cellpadding="0][tr][td align = "left"]Damian ClarkHiFi Simulation SoftwareDeveloper of ActiveSkyThe next-generation weather environment simulation for FS2002!http://hifi.avsim.net/activesky[/td][td]http://hifi.avsim.net/activesky/images/wxrebeta.jpg][/td][/tr][/table://http://hifi.avsim.net/activesky/ima...][/tr][/table

Damian Clark
HiFi  Simulation Technologies

Hello,I use version 1.6.....with version 1.6 you told us that there where no more stutters in FS?...they still exsist?Thanks for your help,Kappa

  • Commercial Member

Kappa,Are you using FSFLIGHTMAX export option, if so, does the problem go away when you disable this option? Have you tried the DISABLE ALL WX UPDATES DURING FORCE option? When you use this option you need to make sure you have a VALID ARRIVAL AIRPORT ID set and the FORCE CHECKBOX checked. This is the cause of 99% of ALL wxRE reported problems... Double check this please. You should not get stutters when this is working correctly as the engine will simply PAUSE and not update when you are within force.What are your update interval settings? Sounds like you have them WAY too low. FWIW I am referring to stutters caused by system processing OUTSIDE of FS2002. Not referring to FS2002 stutters caused by having too much scenery going on or too-high graphics options.So many variables yet you posted so little information. Please e-mail me [email protected] so we can get this resolved. Thank you and sorry the support was SO TERRIBLE.-Damian[table border=0" cellspacing="30" cellpadding="0][tr][td align = "left"]Damian ClarkHiFi Simulation SoftwareDeveloper of ActiveSkyThe next-generation weather environment simulation for FS2002!http://hifi.avsim.net/activesky[/td][td]http://hifi.avsim.net/activesky/images/wxrebeta.jpg][/td][/tr][/table://http://hifi.avsim.net/activesky/ima...][/tr][/table

Damian Clark
HiFi  Simulation Technologies

Hello, I do not realy understand the 'DISABLE ALL WX UPDATES DURING FORCE' option?So if I fill in EDDM in the cusom/destenation field (dest. force checked), AS stops updating weather 60NM inbound EDDM to be sure?The stutters still occur without updating FSFlightMax. My update cycles are both set to 7 minutes.Thanks for your kind help!Kappa

  • Commercial Member

Hi,That option will do just as described.. it will force a wx update once you cross the threshold of 60nm and then stop updating.Update METAR should be no less than 15 minutes, it does not really help and it can cause performance problems. FD/Export interval should be AT LEAST 30 minutes for the same reason, this is high-overhead stuff and at 7minutes for both settings it is no wonder you are having some performance problems. Try 15 minutes for METAR and 45 minutes for FD/Export, see if that helps. Also have you tried checking the "FORCE IDLE PRIORITY" box and have you tried running wxRE minimized? THanks!-Damian[table border=0" cellspacing="30" cellpadding="0][tr][td align = "left"]Damian ClarkHiFi Simulation SoftwareDeveloper of ActiveSkyThe next-generation weather environment simulation for FS2002!http://hifi.avsim.net/activesky[/td][td]http://hifi.avsim.net/activesky/images/wxrebeta.jpg][/td][/tr][/table://http://hifi.avsim.net/activesky/ima...][/tr][/table

Damian Clark
HiFi  Simulation Technologies

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.