Autopilot install help

[Guest]

I added an autopilot to one of my planes that did not have one. I intalled a new stack with the autopilot and in the aircraft.cfg I added a 1 next to the autopilot. I have a small problem, the airplane will follow alt. but it will not change headings. What else do I have to change to get the aircraft.cfg to bank and follow a heading in the autopilot mode?David AlbrightFAA Flight dispatcherSingle and Mult-engine rated pilot500 hours Real PIC2000 hours Sim PICSim Test Pilot

[wsieffert 0]

Is the heading set on the autopilot or on a gauge? Do you have a button to turn on the heading function?

[Guest]

Yes I do have the heading set on the gauge and it still will not go into the bank towards the heading.David AlbrightFAA Flight dispatcherSingle and Mult-engine rated pilot500 hours Real PIC2000 hours Sim PICSim Test Pilot

[Guest RobA]

David, I added an autopilot to the Republic SeeBee by adding this to the aircraft.cfg.....[autopilot]autopilot_available=1flight_director_available=0default_vertical_speed=700.000autothrottle_available=0pitch_takeoff_ga=8.000use_no_default_pitch=1use_no_default_bank=1and this to the panel.cfg[Window01]BACKGROUND_COLOR=2,2,2size_mm=156,308window_size_ratio=1.0position=8visible=0ident=RADIO_STACK_PANELgauge00=Bendix_King_Radio!Bendix-King Radio Audio, 0, 0gauge01=Bendix_King_Radio!Bendix-King Radio Nav-Comm 1, 0, 29gauge02=Bendix_King_Radio!Bendix-King Radio Nav-Comm 2, 0, 86gauge03=Bendix_King_Radio!Bendix-King Radio ADF, 0, 142gauge04=Bendix_King_Radio!Bendix-King Radio DME, 0, 180gauge05=Bendix_King_Radio!Bendix-King Radio Xpndr, 0, 217gauge06=Bendix_King_Radio!Bendix-King Radio AP, 0, 262Brackets will be deleted from this msg by avsim format but they should be in there.Best, Rob