anybody got a set of revised contact points for the landing gear on Eric Cantu's great Embraer 120? The nose gear is slightly off contact with the ground, which means that if you slew the airplane, it takes off like a bat outa ####. (FS9 thinks its airborne.)Just needs a tweak or two, but Im not so good at that stuff.Happy new year.Eric

I have not examined the contact point yet but in the meantime after you have slewed to where you want to be - make sure you are on the ground and then press F1 and then unslew, it will solve your problem. Its sorted out my slewing problems with some other planes I have.

thanks Nevin. Good advice. Didnt know the F1 trick.Still, this is a contact points problem. The Posky 747SP has the same issue BTW.Happy New Year!Eric

check Microsoft's airplane container SDK docs.for Cantu's Emb120 .cfg i tried changing the first contact point entry from:point.0=1, 13.00, 0.00, -5.30, 1181, 0, 0.596, 39.9, 0.296, 1.581, 0.9516, 4.8, 4.8, 0, 184.0, 184.0to:point.0=1, 13.00, 0.00, -5.9, 1181, 0, 0.596, 39.9, 0.296, 1.581, 0.9516, 4.8, 4.8, 0, 184.0, 184.0the 4th entry in the list being the vert location variable...the 5.3 to 5.9 (5.9, which is the next two contact point entrie's values, assuming they are the rear gear...)and it seems to settle, takeoff, taxi fine nowhope it works for you :)awesome plane btw Eric thanks very very very much!

Excellent. Thanks.