Hello All, For some reason, the gear animation does not work on my Cantu Embraer 120. After I hit "G" or hit the gear lever in the 2-D panel, the gears fail to retract. Does anyone know how I can fix this by editing the CFG? I am posting my CFG in a separate post. If someone can find the problem please let me know how to fix it!Thanks!Dylan

(fltsim.0)title=EMB120 Delta Connectionsim=EMB120model=panel=sound=texture=daldxtkb_checklists=description=Embraer EMB120 model by Erick Cantu. Paint by Steve Drabekui_manufacturer=Embraerui_type=120ui_variation=Delta Connectionatc_airline=atc_id=atc_flight_number=atc_heavy=0atc_id_color=0x00000000atc_id_font=Verdana,-11,1,600,0visual_damage=1atc_parking_types=RAMP(fltsim.1)title=EMB120 Embraer Roll-Outsim=EMB120model=panel=sound=texture=embraer_housekb_checklists=description=Embraer EMB120 model by Erick Cantu. Paint by Daniel Halpernui_manufacturer=Embraerui_type=EMB120ui_variation=embraer_houseatc_airline=atc_id=atc_flight_number=atc_heavy=0atc_id_color=0x00000000atc_id_font=Verdana,-11,1,600,0visual_damage=1atc_parking_types=RAMP(fltsim.2)title=EMB120 Skywestsim=EMB120model=panel=sound=texture=skywkb_checklists=description=Embraer EMB120 model by Erick Cantu. Paint by Steve Drabek, Metal textures by Daniel Halpernui_manufacturer=Embraerui_type=EMB120ui_variation=SkyWestatc_airline=atc_id=atc_flight_number=atc_heavy=0atc_id_color=0x00000000atc_id_font=Verdana,-11,1,600,0visual_damage=1atc_parking_types=RAMP(fltsim.3)title=EMB120 United Express final liverysim=EMB120model=panel=sound=texture=ua2kb_checklists=description=Embraer EMB120 model by Erick Cantu. Paint by Steve Drabekui_manufacturer=Embraerui_type=EMB120ui_variation=United Expressatc_airline=atc_id=atc_flight_number=atc_heavy=0atc_id_color=0x00000000atc_id_font=Verdana,-11,1,600,0visual_damage=1atc_parking_types=RAMP(fltsim.4)title=EMB120 SkyWest (United Express New Colors) - N293SWsim=EMB120model=panel=sound=texture=SKW_N293SWdescription=Embraer EMB120 model by Erick Cantu. SKW N293SW repaint by Jeffrey S. Bryner, Metal textures by Daniel Halpernui_manufacturer=Embraerui_type=EMB120ui_variation=SkyWest (United Express New Colors) - N293SWatc_airline=SkyWestatc_id=N293SWatc_flight_number=5567atc_heavy=0atc_id_color=0x00000000atc_id_font=Verdana,-11,1,600,0visual_damage=1atc_parking_codes=UALX,SKWatc_parking_types=GATE,RAMP(General)performance=MTOW 26,433 lbsnMLW 25,794 lbsnZFW 20,610 lbsnPower: 1800 shp PW118AnTakeoff Power: 1980 shpnStall Speeds: 120/89 ktsnMmo/Mo: 0.52M/250ktsnRange: 1570nm + reservenEconomic cruise 270kts FL250nMax cruise 310ktsatc_type=EMBRAERatc_model=(WEIGHT_AND_BALANCE)reference_datum_position = 0.000,0.000,0.000empty_weight_CG_position = 0.000,0.000,0.000empty_weight_roll_MOI = 213440.0empty_weight_pitch_MOI = 168681.0empty_weight_yaw_MOI = 244114.0empty_weight_coupled_MOI = 1300.0empty_weight = 16507.0max_number_of_stations = 13// weight Fore/Aft Lft/Rt Up/Dnstation_load.0 = 400, 19.000, 0.000, 3.000 //pilotsstation_load.1 = 200, 16.000, -1.650, 3.000 //flight attendant// PAYLOAD FOLLOWS// MAX PAYLOAD 6313 lb// MAX PAYLOAD WITH FULL FUEL 3992 lbstation_load.2 = 170, 11.500, 0.000, 3.000 //Row 1 - 2 Paxstation_load.3 = 340, 9.000, 0.000, 3.000 //Row 2 - 3 Paxstation_load.4 = 340, 6.500, 0.000, 3.000 //Row 3 - 3 Paxstation_load.5 = 340, 4.000, 0.000, 3.000 //Row 4 - 3 Paxstation_load.6 = 340, 1.200, 0.000, 3.000 //Row 5 - 3 Paxstation_load.7 = 340, -1.500, 0.000, 3.000 //Row 6 - 3 Paxstation_load.8 = 340, -4.000, 0.000, 3.000 //Row 7 - 3 Paxstation_load.9 = 340, -8.300, 0.000, 3.000 //Row 8 - 3 Paxstation_load.10 = 340, -10.800, 0.000, 3.000 //Row 9 - 3 Paxstation_load.11 = 340, -13.500, 0.000, 3.000 //Row 10 - 4 Paxstation_load.12 = 520, -19.000, 0.000, 3.000 //baggage// ZFW = 16507 lb +// Fuel = 5906 lb +// Payload = 3750 lb =// TOTAL = 26163 lb CAN NOT BE MORE THAN 26609 lb MAX RAMP WEIGHTmax_gross_weight=31285.500000(fuel)// MGTOW FUEL QUANTITY = 440.7 gal per tank 5906lb total// MAX PAYLOAD FUEL QUANTITY = 192.4 gal per tank 2579lb totalLeftMain = 0.000, -14.500, -1.000, 440.7, 3.0RightMain = 0.000, 14.500, -1.000, 440.7, 3.0fuel_type = 2number_of_tank_selectors = 1 //0 Class <0=none,1=wheel, 2=scrape, 3=float> //1 Longitudinal Position (feet) //2 Lateral Position (feet) //3 Vertical Position (feet) //4 Impact Damage Threshold (Feet Per Minute) //5 Brake Map (0=None, 1=Left, 2=Right) //6 Wheel Radius (feet) //7 Steer Angle (degrees) //8 Static Compression (feet) (0 if rigid) //9 Max/Static Compression Ratio //10 Damping Ratio (0=Undamped, 1=Critically Damped)electric_pump=0 //11 Extension Time (seconds) //12 Retraction Time (seconds) //13 Sound Type //14 Airspeed limit for retraction (KIAS) //15 Airspeed that gear gets damage at (KIAS)(contact_points)point.0=1, 13.00, 0.00, -5.30, 1181, 0, 0.596, 39.9, 0.296, 1.581, 0.9516, 4.8, 4.8, 0, 184.0, 184.0point.1=1, -1.67, -8.58, -5.9, 1574, 1, 0.596, 0.0, 0.642, 1.581, 0.8152, 4.5, 5.2, 2, 184.0, 184.0point.2=1, -1.67, 8.58, -5.9, 1574, 2, 0.596, 0.0, 0.642, 1.581, 0.8152, 4.8, 4.9, 3, 184.0, 184.0point.3=2, -3.33, -23.92, -3.00, 787, 0, 0.000, 0.0, 0.000, 0.0, 0.0000, 0.0, 0.0, 5, 0.0, 0.0point.4=2, -3.33, 23.92, -3.00, 787, 0, 0.000, 0.0, 0.000, 0.0, 0.0000, 0.0, 0.0, 6, 0.0, 0.0point.5=2, -22.67, 0.00, 0.00, 787, 0, 0.000, 0.0, 0.000, 0.0, 0.0000, 0.0, 0.0, 9, 0.0, 0.0point.6=2, 23.08, 0.00, -1.50, 787, 0, 0.000, 0.0, 0.000, 0.0, 0.0000, 0.0, 0.0, 4, 0.0, 0.0static_pitch = -1.0static_cg_height = 4.3gear_system_type=1 //Hydraulic(LIGHTS)//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpitlight.0 = 3, 0.90, -32.00, 2.90, fx_navred ,light.1 = 3, 0.90, 32.00, 2.90, fx_navgre ,light.2 = 3, -39.80, 0.00, 16.00, fx_navwhi ,light.3 = 2, 0.70, -32.00, 2.90, fx_strobe ,light.4 = 2, 0.70, 32.00, 2.90, fx_strobe ,light.5 = 1, 0.00, 0.00, 7.0, fx_beacon ,light.6 = 2, -4.55, 0.00, -1.85, fx_strobe ,light.7 = 4, 4.91, 0.00, 1.64, fx_vclight,(exits)number_of_exits = 1exit_rate.0 = 0.4 ;Percent per second(Flaps.0)type = 1span-outboard = 0.500extending-time = 13.000system_type = 0damaging-speed = 250.0blowout-speed = 300.0lift_scalar = 1.0drag_scalar = 1.0pitch_scalar = 1.0flaps-position.0= 0.0flaps-position.1= 15.0flaps-position.2= 25.0flaps-position.3= 45.0(flight_tuning)cruise_lift_scalar = 1.000pitch_stability = 1.500roll_stability = 1.000yaw_stability = 1.000parasite_drag_scalar = 0.850induced_drag_scalar = 0.850elevator_effectiveness = 0.750aileron_effectiveness = 0.925rudder_effectiveness = 0.850elevator_trim_effectiveness = 1.200aileron_trim_effectiveness = 1.000rudder_trim_effectiveness = 1.000(airplane_geometry)wing_area = 425.000000wing_span = 64.833333wing_root_chord = 6.583333wing_dihedral = 6.300659wing_incidence = 1.299756wing_twist = 1.499634oswald_efficiency_factor = 0.909222wing_winglets_flag = 0wing_sweep = 0.000000wing_pos_apex_lon = 0.000000wing_pos_apex_vert = 0.000000htail_area = 105.000000htail_span = 22.000000htail_pos_lon = -32.000000htail_pos_vert = 0.000000htail_incidence = 0.000000htail_sweep = 0.000000vtail_area = 89.000000vtail_span = 10.756393vtail_sweep = 0.000000vtail_pos_lon = -30.833333vtail_pos_vert = 5.833333elevator_area = 26.250000aileron_area = 17.000000rudder_area = 15.130000elevator_up_limit = 27.501974elevator_down_limit = 20.626481aileron_up_limit = 19.480565aileron_down_limit = 14.896903rudder_limit = 23.491270elevator_trim_limit = 19.480565spoiler_limit = 0.000000spoilerons_available = 0aileron_to_spoileron_gain = 0.000000min_ailerons_for_spoilerons = 0.000000min_flaps_for_spoilerons = 0.000000(GeneralEngineData)engine_type = 5Engine.0 = 8.833, -13.583, 0.000Engine.1 = 8.833, 13.583, 0.000fuel_flow_scalar = 0.75min_throttle_limit=-0.250000(TurbineEngineData)fuel_flow_gain = 0.009inlet_area = 1.0rated_N2_rpm = 33300 static_thrust = 230afterburner_available = 0(propeller)thrust_scalar = 1.0 propeller_type = 0propeller_diameter = 10.6propeller_blades = 4propeller_moi = 30beta_max = 45.0beta_min = 15.0min_gov_rpm = 16653prop_tc = 0.004gear_reduction_ratio = 25.62fixed_pitch_beta = 0low_speed_theory_limit = 80prop_sync_available = 1prop_deice_available = 1prop_feathering_available = 1prop_auto_feathering_available = 1min_rpm_for_feather = 600beta_feather = 79.2power_absorbed_cf = 0.9defeathering_accumulators_available = 0prop_reverse_available = 1minimum_on_ground_beta = 1.0minimum_reverse_beta = -15.0(turboprop_engine)power_scalar = 1.0 maximum_torque = 7272(Reference Speeds)flaps_up_stall_speed = 120.000000full_flaps_stall_speed = 96.000000cruise_speed = 359.547707max_indicated_speed=259.000000max_mach=0.579980(keyboard_response)elevator = 150, 250aileron = 150, 250rudder = 150, 250(Views)eyepoint = 0.00, -1.70, 5.77(autopilot)autopilot_available = 1flight_director_available = 1default_vertical_speed = 1000.000000autothrottle_available = 1autothrottle_arming_required = 0autothrottle_takeoff_ga = 0autothrottle_max_rpm = 90.000000pitch_takeoff_ga = 8.000000max_pitch=10.000000max_pitch_acceleration=1.000000max_pitch_velocity_lo_alt=2.000000max_pitch_velocity_hi_alt=1.500000max_pitch_velocity_lo_alt_breakpoint=20000.000000max_pitch_velocity_hi_alt_breakpoint=28000.000000max_bank=25.000000max_bank_acceleration=1.800000max_bank_velocity=3.000000max_throttle_rate=0.100000nav_proportional_control=9.000000nav_integrator_control=0.250000nav_derivative_control=0.000000nav_integrator_boundary=2.500000nav_derivative_boundary=0.000000gs_proportional_control=9.520000gs_integrator_control=0.260000gs_derivative_control=0.000000gs_integrator_boundary=0.700000gs_derivative_boundary=0.000000yaw_damper_gain=0.000000(direction_indicators)direction_indicator.0 = 3,0(pitot_static)vertical_speed_time_constant = 150(forcefeedback)stick_shaker_magnitude=5000 ; 0 - 10000stick_shaker_direction=0 ; 0 - 35999 degreesstick_shaker_period=111111 ; in microsecondsgear_bump_nose_magnitude=3000 ; 0 - 10000gear_bump_nose_direction=18000 ; 0 - 35999 degreesgear_bump_nose_duration=250000 ; in microsecondsgear_bump_left_magnitude=2700 ; 0 - 10000gear_bump_left_direction=9000 ; 0 - 35999 degreesgear_bump_left_duration=250000 ; in microsecondsgear_bump_right_magnitude=2700 ; 0 - 10000gear_bump_right_direction=27000 ; 0 - 35999 degreesgear_bump_right_duration=250000 ; in microsecondsground_bumps_magnitude1=1300 ; 0 - 10000ground_bumps_angle1=08900 ; 0 - 35999 degreesground_bumps_intercept1=3.0ground_bumps_slope1=0.20ground_bumps_magnitude2=200 ; 0 - 10000ground_bumps_angle2=09100 ; 0 - 35999 degreesground_bumps_intercept2=1.075ground_bumps_slope2=0.035crash_magnitude1=10000 ; 0 - 10000crash_direction1=01000 ; 0 - 35999 degreescrash_magnitude2=10000 ; 0 - 10000crash_direction2=9000 ; 0 - 35999 degreescrash_period2=75000 ; in microsecondscrash_duration2=2500000 ; in microseconds(brakes)toe_brakes_scale=1.000000parking_brake=1(hydraulic_system)normal_pressure=0.000000(stall_warning)type=1(attitude_indicators)attitude_indicator.0=1[turn_indicators]turn_indicator.0=1,0(gear_warning_system)gear_warning_available=0pct_throttle_limit=0.099976flap_limit_power=30.022988flap_limit_idle=15.011494NOTICE: I Replaced all brackets with parenthesis for this posting because the writing between the brackets wasn't showing up when I posted it!

FYI - Brackets CAN be used - but you have to check the little box at the top of the message area which says "Check here if you want to format your message in plain text".Hope that info is helpful in the future.

>Hello All, For some reason, the gear animation does not work>on my Cantu Embraer 120. After I hit "G" or hit the gear lever>in the 2-D panel, the gears fail to retract. Does anyone know>how I can fix this by editing the CFG? I am posting my CFG in>a separate post. If someone can find the problem please let me>know how to fix it!>>Thanks!>Dylan I just downloaded and installed it and the gear works just fine for me.Yu might check your "Assignments" dialogue and see if the Gear assignment is missing.Mine reads as follows:Landing gear up/down - Keyboard G - Joystick Button 8 - and the repeat slider all the way to the left.I cannot think of anything else which would cause the gear not to work as it is using the default King Air panel - i.e. all default gauges etc.Hope this helps.

I am 100% sure that the assignment works, as I can see the lever move when I hit "G". However, the exterior model does not show the gears retracting. Any other ideas anyone?

I would try uninstalling it, and re-installing it.It is also possible that your download misfired - so you might want to download it again.It worked properly for me so that is all I can think of.