RobbieHe,Please install and run CPUz and post the CPU, MAINBOARD and MEMORY tabs for Bob (w6kd) to reviewhttp://www.cpuid.com/download/cpuz/cpuz_152_setup.exeThat will not give him all the information about the BIOS but it will assist him in ascertaining your true performance level based on the readouts that tool will display

Thank's! I cut and pasted a portion of the report. What do you think? I'd be very interested in hearing back. What a great program! What further tweaks do you recommend?RHNumber of cores 2 (max 2) Number of threads 2 (max 2) Name Intel Core 2 Duo E8400 Codename Wolfdale Specification Intel® Core2 Duo CPU E8400 @ 3.00GHz Package (platform ID) Socket 775 LGA (0x0) CPUID 6.7.A Extended CPUID 6.17 Core Stepping E0 Technology 45 nm Core Speed 4005.3 MHz Multiplier x FSB 9.0 x 445.0 MHz Rated Bus speed 1780.1 MHz Stock frequency 3000 MHz Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size L2 cache 6144 KBytes, 24-way set associative, 64-byte line size FID/VID Control yes FID range 6.0x - 9.0x Max VID 1.250 VNorthbridge Intel P45/P43/G45/G43 rev. A2Southbridge Intel 82801JR (ICH10R) rev. 00Graphic Interface PCI-ExpressPCI-E Link Width x16PCI-E Max Link Width x16Memory Type DDR2Memory Size 4096 MBytesChannels Dual, (Symmetric)Memory Frequency 445.0 MHz (1:1)CAS# latency (CL) 4.0RAS# to CAS# delay (tRCD) 4RAS# Precharge (tRP) 4Cycle Time (tRAS) 12Row Refresh Cycle Time (tRFC) 52Command Rate (CR) 2TMCHBAR I/O Base address 0x0FED14000MCHBAR I/O Size 4096DIMM # 1 SMBus address 0x50 Memory type DDR2 Module format Regular UDIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 2048 MBytes Max bandwidth PC2-6400 (400 MHz) Part number F2-6400CL4-2GBPI-B Number of banks 2 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP yes (1 profiles) XMP noJEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 3.0-3-3-8-12 @ 200 MHz JEDEC #2 4.0-4-4-10-16 @ 266 MHz JEDEC #3 5.0-5-5-15-23 @ 400 MHzEPP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) EPP profile #1 (full) 4.0-4-4-12-36-2T @ 400 MHz (1.900 Volts)DIMM # 2 SMBus address 0x52 Memory type DDR2 Module format Regular UDIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 2048 MBytes Max bandwidth PC2-6400 (400 MHz) Part number F2-6400CL4-2GBPI-B Number of banks 2 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP yes (1 profiles) XMP noJEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 3.0-3-3-8-12 @ 200 MHz JEDEC #2 4.0-4-4-10-16 @ 266 MHz JEDEC #3 5.0-5-5-15-23 @ 400 MHzEPP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) EPP profile #1 (full) 4.0-4-4-12-36-2T @ 400 MHz (1.900 Volts)LPCIO Vendor WinbondLPCIO Model W83667HGLPCIO Vendor ID 0x5CA3LPCIO Chip ID 0xA5LPCIO Revision ID 0x13Config Mode I/O address 0x2EConfig Mode LDN 0xBConfig Mode registers Hardware monitor Winbond W83627DHG Voltage 0 1.34 Volts [0xA8] (CPU VCORE) Voltage 1 11.88 Volts [0xD5] (+12V) Voltage 2 3.33 Volts [0xD0] (AVCC) Voltage 3 3.30 Volts [0xCE] (+3.3V) Voltage 4 5.09 Volts [0xD4] (+5V) Voltage 6 1.50 Volts [0xBC] (DRAM) Temperature 0 43