Hello everyone!I am using the A300 B4 panel by Beno

*BUMP*

I cant figure out this panel either, both NAV problem and cant either get any of the autopilot functions to work properly.. :(Speed hold and climb rate among others, i press the IAS or Speed button (?) and nothing happens.Edit: Think the fix for the NAV's is posted further down in another post :)

Hi,I have no problems with the panel.A good idea is to read the complete manual (a3002_gb.zip). The essential key here is to manage the hydralic servos such as the Pitch Trim switches and such.This panel is by no means a "launch and go" panel. It is a very complex panel which needs to be treated as such. ;-)Another idea is to use the Aircraft.cfg file which comes with the panel package, with the necessary modifications, inorder to fit the A300 from SGA.Fly safe, Staffan AhlbergSweden/Stockholm/ESSAMD-11 Panel Team - Beta testerMy specs are:Dell Dimension 4600 P4/3.0 Ghz512 Mb DDR333 Dual channel memory128 Mb ATI Radeon 9800 ProCatalyst 3.9DirectX 9.0E171FPb Flat panel monitor 17"240Gb (2x120) 7200rpm HD

Hi Staffan, when you say changes, do you mean just to the ID information for ATC and how the aircraft is displayed in the menu for FS? or are the changes more extensive.And does your change include the fix mentioned in a previous post?Alan Howard

Cheers for the tip, Steffan - Im pretty much a PPNP (panel-plug n play) guy so should have figured there was more to it :DDidnt even see the manual folder until now DOH!Barbadianflyer, the aircraft.cfg changes you have to make is noted in this manual mentioned. You have to add to some sections both with radios and the electrical sections :)May I add that after just skimming the panel manual, i'll have to say this panel is insane lol. And I mean that in a good way :)

>Hi Staffan, when you say changes, do you mean just to the ID>information for ATC and how the aircraft is displayed in the>menu for FS? or are the changes more extensive.>And does your change include the fix mentioned in a previous>post?>>Alan HowardHi,I mean that you need to move the Contact Points and Lights sections from the SGA A300 cfg file. ;-)However, you have to be somewhat familiar with editing cfg files to do it.Fly safe, Staffan AhlbergSweden/Stockholm/ESSAMD-11 Panel Team - Beta testerMy specs are:Dell Dimension 4600 P4/3.0 Ghz512 Mb DDR333 Dual channel memory128 Mb ATI Radeon 9800 ProCatalyst 3.9DirectX 9.0E171FPb Flat panel monitor 17"240Gb (2x120) 7200rpm HD

Perhaps someone can post there hybrid aircraft.cfg and panel.cfg...Thanks.

I tried this panel and it is the only decent one for the A-300 that I could find. Also the plane that comes is really good, but I don't know which texture would work with it, if any. I've been looking for a good A300 and a good A300 panel for a long time and these two are the best I could get, but I would like to have some repaints too (American Airlines if possible).Thanks,Leo