This is a duplicate of a post I made by mistake in the download section..

 

Posted 07 February 2016 - 08:27 PM

I was investigating a problem and found that if I  run Linda from fsuipc (4.949c ) with ipcReady.lua on P3D V3.1 ,all is good , but when I close P3D I get ntdll.dll crashes reported in the event viewer, no msg or anyhing in the main window . if I remove the ipcReady.lua all is OK. no logs.*((

There are 3 entries ,

 

Log Name:      Application
Source:        Windows Error Reporting
Date:          08-Feb-16 11:21:54 AM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      Aero-PC
Description:
Fault bucket 107835339841, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: Prepar3D.exe
P2: 3.1.2.15831
P3: 5672b60a
P4: ntdll.dll
P5: 10.0.10586.20
P6: 5654262a
P7: c0000005
P8: 00053fa7
P9:
P10:

Attached files:
C:\Users\aero\AppData\Local\Temp\WERE409.tmp.WERInternalMetadata.xml

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_a4675fef1386b73af1bd4dd3b98681d0ba52150_4a54da6c_1b04e88d

Analysis symbol:
Rechecking for solution: 0
Report Id: d829106e-9e34-4056-970f-2f7e4f49380a
Report Status: 0
Hashed bucket: cfcc1fd703b324792d8f9511a71f8454
Event Xml:
<Event xmlns="http://schemas.micro...08/events/event">
  <System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2016-02-08T00:21:54.798861300Z" />
    <EventRecordID>15482</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Aero-PC</Computer>
    <Security />
  </System>
  <EventData>
    <Data>107835339841</Data>
    <Data>1</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>Prepar3D.exe</Data>
    <Data>3.1.2.15831</Data>
    <Data>5672b60a</Data>
    <Data>ntdll.dll</Data>
    <Data>10.0.10586.20</Data>
    <Data>5654262a</Data>
    <Data>c0000005</Data>
    <Data>00053fa7</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Users\aero\AppData\Local\Temp\WERE409.tmp.WERInternalMetadata.xml</Data>
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_a4675fef1386b73af1bd4dd3b98681d0ba52150_4a54da6c_1b04e88d</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>d829106e-9e34-4056-970f-2f7e4f49380a</Data>
    <Data>0</Data>
    <Data>cfcc1fd703b324792d8f9511a71f8454</Data>
  </EventData>
</Event>

 

Log Name:      Application
Source:        Application Error
Date:          08-Feb-16 11:21:53 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Aero-PC
Description:
Faulting application name: Prepar3D.exe, version: 3.1.2.15831, time stamp: 0x5672b60a
Faulting module name: ntdll.dll, version: 10.0.10586.20, time stamp: 0x5654262a
Exception code: 0xc0000005
Fault offset: 0x00053fa7
Faulting process id: 0x1af4
Faulting application start time: 0x01d16206767d44ca
Faulting application path: D:\Prepar3D v3\Prepar3D.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d829106e-9e34-4056-970f-2f7e4f49380a
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.micro...08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2016-02-08T00:21:53.499518100Z" />
    <EventRecordID>15481</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Aero-PC</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Prepar3D.exe</Data>
    <Data>3.1.2.15831</Data>
    <Data>5672b60a</Data>
    <Data>ntdll.dll</Data>
    <Data>10.0.10586.20</Data>
    <Data>5654262a</Data>
    <Data>c0000005</Data>
    <Data>00053fa7</Data>
    <Data>1af4</Data>
    <Data>01d16206767d44ca</Data>
    <Data>D:\Prepar3D v3\Prepar3D.exe</Data>
    <Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
    <Data>d829106e-9e34-4056-970f-2f7e4f49380a</Data>
    <Data>
    </Data>
    <Data>
    </Data>
  </EventData>
</Event>

 

Log Name:      Application
Source:        .NET Runtime
Date:          08-Feb-16 11:21:53 AM
Event ID:      1026
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Aero-PC
Description:
Application: Prepar3D.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 77413FA7

Event Xml:
<Event xmlns="http://schemas.micro...08/events/event">
  <System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2016-02-08T00:21:53.358369600Z" />
    <EventRecordID>15480</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Aero-PC</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Application: Prepar3D.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 77413FA7
</Data>
  </EventData>
</Event>

 

I am running win 10 at the latest updates.

 

This is for your information , as except for filling my log and making my debug  more messy , I dont see any problem in P3D or Win. neither in Linda or FSUIPC...

 

Jorge

Hi Jorge

 

Thank you for this valuable input. I had seen your original post (now deleted) and have been researching the purpose of ipcReady.lua and other parts of the LINDA/FSUIPC4 interaction. I will wait a bit before I respond so I can do some testing myself.