April 11, 201610 yr I haven't seen any discussion about putting the GTN 750 into Aerosoft's DHC6. Here is how I'm using it, Dont remember where I obtained it,but author is listed in the ini. file edits for panel are below; // ******************************** // *** Aerosoft *** // *** Finn Jacobsen *** // *** Juni 2013 *** // ******************************** [Window Titles] Window00=Main Window01=Checklist Window02=Panel sel Window03=GPS [VIEWS] VIEW_UP_DIR=-20.4, 0.0, -45.0 VIEW_FORWARD_ZOOM=1.0 VIEW_FORWARD_DIR=0.0, 0.0, 0.0 //--------------------------------------- [Window00] file=Panel_2D.bmp size_mm=800, 600 position=5 BACKGROUND_COLOR=0,0,0 visible=1 ident=MAIN_PANEL //---------------------------------------- [Window01] size_mm= 338, 650 window_size=0.3 windowsize_ratio=0.55 window_pos= 0.010,0.035 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=12345 gauge00=TW_Chk!TW_ChecklistA, 0, 0, 338, 650 gauge01=TW_Chk!TW_ChecklistB1, 0, 0, 1, 1 gauge02=TW_Chk!TW_ChecklistB2, 0, 0, 1, 1 gauge03=TW_Chk!TW_ChecklistB3, 0, 0, 1, 1 gauge04=TW_Chk!TW_ChecklistC, 0, 0, 1, 1 gauge05=TW_Chk!TW_ChecklistD, 0, 0, 1, 1 window_pos= 0.660, 0.192 //---------------------------------------- [Window02] size_mm= 450, 450 window_size=0.14 windowsize_ratio=0.55 window_pos= 0.005,0.81 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=23456 gauge00=TW_Chk!Panel_sel, 0, 0, 450, 420 //-------------------------------------------------------- [Window03] Background_color=0,0,0 size_mm=937,887 ident=14401 position=8 window_size= 0.340,0.580 zorder=99 gauge00=F1GTN!GTN750,0,0,937,887,UNIT1.POP //----------------------------------------------------- [VCockpit01] file=$DHC6VIRTGAUGES.bmp Background_color=0,0,0 size_mm=512, 512 visible=1 pixel_size=512, 512 texture=$DHC6VIRTGAUGES gauge00=TW_system!TW_Sys1, 0, 0, 1, 1 gauge01=TW_system!TW_Sys2, 0, 0, 1, 1 gauge02=TW_system!TW_Sys3, 0, 0, 1, 1 gauge03=TW_system!TW_Ap, 0, 0, 1, 1 gauge04=TW_system!TW_Ann, 0, 0, 1, 1 gauge05=TW_system!TW_FDR, 0, 0, 1, 1 gauge06=TW_System!TW_State, 0, 0, 1, 1 gauge07=TW_System!Twot_vibr, 0, 0, 1, 1 gauge08=ASC!MAIN, 0,0, 10, 10, 0 gauge09=TW_Disp!Com_Nav_Disp, 345, 4, 162, 218 //gauge10=TW_GPS!GPS_530vc3D, 4,4,332,248 gauge10=F1GTN!GTN750VC,4,-50,332,300,UNIT1 gauge11=TW_Disp!DME, 8, 298, 357, 70 gauge12=TW_Disp!ADF, 8, 378, 475, 53 gauge13=TW_Disp!Transp, 8, 441, 457, 64 gauge14=TW_Disp!Clock, 377, 236, 125, 97 gauge15=TW_System!TW_APIAS, 0, 0, 1, 1 [Default View] X=0 Y=0 SIZE_X=8191 SIZE_Y=6143 * shift 4 opens and closes the pop up for the GTN It should work, runs fine for me. Don't forget to add it within the GTN configurator. You don't need to do anything other than add it in, no adjustment to the unit itself That is all done in the panel ini. If you are a tweaker, you can change the affinity setting....nothing else needed. Intel(R) Core(TM) i7-10700F CPU @ 2.90GHz (8 cores) Hyper on, Evga RTX 3060 12 Gig, 32 GB ram, Windows 11, P3D v6, and MSFS 2020 and a couple of SSD's
Create an account or sign in to comment