I know this is probably a common occurance, but I couldn't find a solution:Every now and then, my mouse clicks and joystick buttons get too sensitive - things progress more than one notch at a time. Elevator trim goes 3 degrees per click, altitude in AP can only be adjusted per 1000 ft increments, altimeter can only be adjusted by 3 inches at a time. I've witnessed it on a few different AC, including the F1 172 and the DF A36.Did I hit a key accidentally? Any way to cure? I noticed today it only happened for certain instruments on the DF A36, including the altimeter, AP, and elevator trim, but not on the RXP 430 or the 3308.Thx for any help!

Loading FS with a default plane is the usual fix and swapping between add-on is usually the cause.http://www.dreamfleet2000.com/gfx/images/F...BANNER_PAUL.jpg

I have exactly the the same problems with trim / altimeter which occurs only when the throttles on the ch quadrant are passed the detent position and in idle.If this is your problem,move the throttles out of idle momentarily while trimming or changing altimeter settings.A cure it is not,but It works!Hope this helps