January 17, 20188 yr Never had any issues with FSX until the October W10 update when (even after only 30 minutes or so) I started having frequent OOM issues. Soooo to the dark side come have I :) I run a three-screen generic cockpit - screens in pyramid formation with low-left being the default/main and on which I set up P3D; low-right for FSCommander and top-screen (40") for scenery/views ahead from the cockpit. I had P3D running on all cylinders with FSC, RC4, AS16, and all three-screens performing as required. However, since yesterday after the sim is set up instead of starting on the default (low-left) waiting to be undocked and moved to the 40" it now loads onto my TV-screen - full size...... The thing is it is still in Windowed mode although I can't grab and move it in order to re-size etc...It was running OK and I was able to undock and move bits around - but now...the image will not undock as before - just stares back at me defiant like I have tried Alt + Enter to move in and out of windowed mode - all I manage is to remove the tool bar! I had a similar situation a few weeks back when LittleNavMap (pre P3D) determined to start up in the ether with only a short piece displayed. With some guidance I was able to put it back in its box using Alt + Space +R then Alt + Space + M to grab and move it back home. I have tried this with the current P3D situation without success. I always make a point of closing the sim by re-docking etc and putting everything back into the default/low right screen before closing down. Any/all suggestions welcome. Thanks in anticipation, Ken ;) Old enough to know better... ...young enough to do most of it again! System: Chillblast (Matt Davies designed) Intel i5-6600 Sklylake CPU O/C to 4.4 GHz; Liquid Cooled; Asus Z170 PRO GAMING MoBo; MSI GeForce GTX 1660Ti 6Gb; 16Gb Corsair Crucial DDR4 RAM; SSD plus SSHD drives; Windows-10. GF MCP-Pro and EFIS + 8 other GF Modules, Honeycomb Alpha & Bravo units, Saitek Pedals, Iiyama 19" x 2, 40" smart TV.
January 17, 20188 yr Author Sorted :) After posting here...had a thought (my head hurts)... Went into Nvidia settings - changed resolution on the 40" screen which made the image a tad smaller which made the white bar at the top of the image visible ~~~ was then able to grab the bar and move it... Dragged the sides of the image etc then dragged image to default screen and closed P3D. Started P3D ~~~ now runs on default screen but can now be dragged to 40" screen. Happy Bunny Ken ;) Old enough to know better... ...young enough to do most of it again! System: Chillblast (Matt Davies designed) Intel i5-6600 Sklylake CPU O/C to 4.4 GHz; Liquid Cooled; Asus Z170 PRO GAMING MoBo; MSI GeForce GTX 1660Ti 6Gb; 16Gb Corsair Crucial DDR4 RAM; SSD plus SSHD drives; Windows-10. GF MCP-Pro and EFIS + 8 other GF Modules, Honeycomb Alpha & Bravo units, Saitek Pedals, Iiyama 19" x 2, 40" smart TV.
Archived
This topic is now archived and is closed to further replies.