Hi, I'm using MCE with FSL a320 and I got this annoying behaviour. After take off during climb phase in any plight I did it, the copilot automatically switch on the AP at certain time, let's say 30 second. I have no run any flow  or asked for AP.

 

Is there a way to disable this behaviour?

1 hour ago, fyase said:

Hi, I'm using MCE with FSL a320 and I got this annoying behaviour. After take off during climb phase in any plight I did it, the copilot automatically switch on the AP at certain time, let's say 30 second. I have no run any flow  or asked for AP.

 

Is there a way to disable this behaviour?

May want to calibrate microphone, as a command such as "AP on" could get it engaged.

No way to disable this.

Only the opposite "autopilot off" is secured against accidental trigger when airborne.

My advice, if your cockpit is noisy and a lot of un-intended commands are picked up, consider getting a mike with a mute button.

On 14/3/2018 at 8:03 PM, FS++ said:

May want to calibrate microphone, as a command such as "AP on" could get it engaged.

No way to disable this.

Only the opposite "autopilot off" is secured against accidental trigger when airborne.

My advice, if your cockpit is noisy and a lot of un-intended commands are picked up, consider getting a mike with a mute button.

Quite strange but i'll try to mute the microfono... I got this AP engage without any red message on status bar ( as usual when MCE recognized a command ) and copilot usually said Autopilot available now, auto pilot on.... looks like something automatical....

26 minutes ago, fyase said:

Quite strange but i'll try to mute the microfono... I got this AP engage without any red message on status bar ( as usual when MCE recognized a command ) and copilot usually said Autopilot available now, auto pilot on.... looks like something automatical....

Nothing is automated, unless somehow Fo is seeing you as one of those (Blind Visually Impaired) pilots who enlist the help of co-pilot to rotate aircraft on takeoff, perform initial climb and engage AP at some point before handing them the aircraft.

But even then, you'd have to make the request to Fo to handle the takeoff.

If it's accidental speech reco, should definitely see the red text before something is performed.  You won't see text for scripted commands.

 

3 hours ago, FS++ said:

Nothing is automated, unless somehow Fo is seeing you as one of those (Blind Visually Impaired) pilots who enlist the help of co-pilot to rotate aircraft on takeoff, perform initial climb and engage AP at some point before handing them the aircraft.

But even then, you'd have to make the request to Fo to handle the takeoff.

If it's accidental speech reco, should definitely see the red text before something is performed.  You won't see text for scripted commands.

 

Sorry for the question but I'm not at the PC for the next days... Is there a option that I could have pressed enabling the BVI mode?

11 hours ago, fyase said:

Sorry for the question but I'm not at the PC for the next days... Is there a option that I could have pressed enabling the BVI mode?

Right-click anywhere in MCE user interface. A drop-down menu will appear.

Make sure option "Enable screen narrator" isn't ON.

 

On 16/3/2018 at 11:20 AM, FS++ said:

Right-click anywhere in MCE user interface. A drop-down menu will appear.

Make sure option "Enable screen narrator" isn't ON.

 

It isn't but this behaviour persist....

So neither a mic issue and voxscript, do you need any log to check?

Edited March 17, 20188 yr by fyase

1 hour ago, fyase said:

It isn't but this behaviour persist....

So neither a mic issue and voxscript, do you need any log to check?

Just post the [OPTIONS] section in "mce.ini"

Thanks

On 3/17/2018 at 8:54 PM, FS++ said:

Just post the [OPTIONS] section in "mce.ini"

Thanks

Even with the option "Enable screen narrator" OFF in the drop down menu the option was still on in the MCE.ini.

I set to OFF in MCE.ini and all works as expected.

 

 

Best regards

Raffaele