Opinion on how to debug? (fslabs, steering)

[cnc3 14]

I am looking for opinions on how to debug an issue I am having with the FSLabs A320 and tiller steering.

My setup: P3D (4.4), FSUIPC (5.15), MFG Crosswind and FSLabs A320 (2.0.1.266b)

Symptoms: I have set the tiller steering to 'sticky' and it is depressed. When I use the rudder pedals, I get the turn to start and then it fades. Looking at FSUIPC's calibration, I see the rudder value go high and then drift back to a much lower value.

Things I have checked:

1. The tiller steering is set to 'sticky'.
2. The pedals are calibrated with MFG crosswind's tool.
3. The rudder inputs are being passed to P3D without FSUIPC intervention.

I'm running out of ideas at this point. Does anyone have any suggestions?

[Bob Scott 7,745]

Sounds like you may have another device making a conflicting input on that axis.  Check ALL your listed devices in the P3D controls-axis menu, and make sure you don't have a "phantom" axis also assigned to your rudder.  P3D will automatically assign axes when it detects a new controller...I've had mini-joystick axes on a game controller do this to me before.

Regards

[cnc3 14]

Thanks for this.

I unplugged my CH Pro Rudder pedals and the problem went away. It would not have occurred to me that the other rudder pedals would cause this issue.