Jump to content
Sign in to follow this  
gollum65

Problem at WF Scenery Design VHHH

Recommended Posts

Hi.  I'm using P3D v5 HF2 with UGCX 2.0.  I recently purchased WF Scenery Design Hong Kong VHHH.  Yesterday I started at the airport (flying to WSSS), but when I tried to start UGCX it told me something along the lines of "there's no airport here".  I tried it again this morning and it worked, but I think I was at a different gate.  I'm pasting bwelow the log file from yesterday.  What I believe is the problem is that for some reason UGCX identified the airport as WFSH, which is not an airport ICAO.  I suspect WFSH stands for WF Scenery Hong Kong, but how UGCX would come up with that I don't know?  Log file below.

------------------------ INITIALIZATING FS MODULE ------------------------ 
            It's a supported Flight Simulator:        [11]...
            Hooking to the Flight Simulator's MAIN window procedure...
            Registering CUSTOM windows messages...
            Reading the INITIALIZATION file...
            Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths...
            Reading settings from the FSX.CFG or PREPAR3D.CFG file located here: 
            C:\Users\gollu\AppData\Roaming\Lockheed Martin\Prepar3D v5\Prepar3D.cfg 
            The Flight Simulator's frame rate LIMIT is 0 fps...
            Creating our timer...
            Current language ID:    [409]    
            Current sound pack:         US        
            Retrieving UGCX module's version...
            Running UGCX module's version: Version: 2.0.0.0
            Attempting to connect to the Flight Simulator...
            CONNECTED! to Flight Simulator...
            Mapping Flight Simulator's events...
            Setting up data definitions...
            Registering delayed events...
            Initializating scenery reader system...
            Verifying the Flight Simulator's SCENERY configuration...
            Reading the SCENERY.CFG file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\Scenery.cfg]  
            Reading the ADD-ONS.CFG file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\add-ons.cfg]  
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\FSLabs\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Program Files\Imagine Simulation\WSSS Singapore P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Aerosoft A330 Pro V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Imaginesim Atlanta\KATL Atlanta P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\A2A\C172\A2A\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Milan Malpensa Professional V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Mega Airport Zuerich V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\Ecosystem\MKSTUDIOS\MK_Lisbon4\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\Ecosystem\MKSTUDIOS\MK_Dublin4\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Program Files (x86)\12bPilot\SODE\P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Sim-wings Anchorage Professional V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam PHNL\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam Addon Manager\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam KLAX_V2\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Mega Airport Frankfurt Professional V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam KDFW\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam Exclude\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global BASE Pack\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Orbx Libraries\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global Vector\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Orbx ObjectFlow\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\KBUR Hollywood Burbank Airport\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\EDBH Barth Stralsund Airport\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\EDCG Rugen Airport\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\NA Southern California\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global Buildings HD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global TerraFlora v2\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global Trees HD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the ADD-ONS.CFG file, located in: 
            [C:\Users\gollu\AppData\Roaming\Lockheed Martin\Prepar3D v5\add-ons.cfg]  
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\FlyTampa\Libraries\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\FlyTampa\Copenhagen\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\FlyTampa\Boston\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FSUIPC6\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\ActiveSkyP5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\LatinVFR Miami KMIAv5 P3dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\LatinVFR Baltimore KBWI P3dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FLAI\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Chicago X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\LatinVFR San Diego v2 P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\New York City X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\NY Airports v2 X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KPHX\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KSFOHD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Common Library\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Gatwick Xtreme\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Heathrow Xtreme\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Edinburgh Xtreme\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KPDX\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Reality XP GTN\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KDEN\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - SEQM\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KIAD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Airport Controller\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Mega Airport Prague\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'SCENERY_ADD-ONS.XML' file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\scenery_add-ons.xml]  
            Unloading the scenery index from memory...
            Updating the INITIALIZATION file...
            Creating aircraft's profile FONT...
            Module's initialization sequence COMPLETED!
------------------------------------------------------------------------------- 
--------------------------- LOCATION CHANGED --------------------------- 
--------------------------- LOCATION CHANGED --------------------------- 
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\A330-343.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\gollu\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\Aerosoft A333 RR Professional.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
--------------------------- LOCATION CHANGED --------------------------- 
            Aircraft's Model Name: [Aerosoft A330-343 Cathay Pacific (B-HLV)] 
------------------------------------------------------------------------------- 
        GPS System - Nearest airport's ICAO ID: [WFSH]...
        Checking for updates, contacting FS2Crew server... 
        Updates check COMPLETED!... 
----------------------- UGCX API ----------------------- 
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- 
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR ----------------------- 
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
                            The airport [WFSH] has been IGNORED because it doesn't have either: RUNWAYS, PARKINGS or TAXIWAYS! 
        Couldn't find ANY airport in the vicinity!...
        USER's aircraft model name: [Aerosoft A330-343 Cathay Pacific (B-HLV)] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        22.31064979  degrees    
            +-> Longitude:        113.91331402  degrees    
            +-> Altitude:        8.534  meters    
            +-> True Heading:    250.843  degrees    
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading process has been COMPLETED!
------------------------------------------------------------------------------- 
------------------------ SIMULATION STARTED ------------------------ 
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\A330-343.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\gollu\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\Aerosoft A333 RR Professional.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
            Aircraft's Model Name: [Aerosoft A330-343 Cathay Pacific (B-HLV)] 
------------------------------------------------------------------------------- 
        ERROR! - Couldn't find the nearest airport to your current location!...
        USER's aircraft model name: [Aerosoft A330-343 Cathay Pacific (B-HLV)] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        22.31064979  degrees    
            +-> Longitude:        113.91331400  degrees    
            +-> Altitude:        13.922  meters    
            +-> True Heading:    250.845  degrees    
        ERROR! - Couldn't find the nearest airport to your current location!...
        USER's aircraft model name: [Aerosoft A330-343 Cathay Pacific (B-HLV)] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        22.31064979  degrees    
            +-> Longitude:        113.91331400  degrees    
            +-> Altitude:        13.922  meters    
            +-> True Heading:    250.845  degrees    
----------------------- REALODING SCENERY DATA ----------------------- 
----------------------- UGCX API ----------------------- 
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- 
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR ----------------------- 
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
                            The airport [WFSH] has been IGNORED because it doesn't have either: RUNWAYS, PARKINGS or TAXIWAYS! 
        Couldn't find ANY airport in the vicinity!...
        USER's aircraft model name: [Aerosoft A330-343 Cathay Pacific (B-HLV)] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        22.31064979  degrees    
            +-> Longitude:        113.91331400  degrees    
            +-> Altitude:        13.922  meters    
            +-> True Heading:    250.845  degrees    
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading process has been COMPLETED!
------------------------------------------------------------------------------- 
        ERROR! - Couldn't find the nearest airport to your current location!...
        USER's aircraft model name: [Aerosoft A330-343 Cathay Pacific (B-HLV)] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        22.31064979  degrees    
            +-> Longitude:        113.91331400  degrees    
            +-> Altitude:        13.922  meters    
            +-> True Heading:    250.845  degrees    
        GPS System - Nearest airport's ICAO ID: [WSSS]...
----------------------- UGCX API ----------------------- 
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- 
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR ----------------------- 
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        WSSS 
        Located at the Region's ID:         
        The NEAREST airport's BGL file's path is: 
        C:\Program Files\Imagine Simulation\WSSS Singapore P3Dv5\scenery\WSSS_AFCAD_P3D5_med.bgl 
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [AE]... 
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\AE.xgs 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\AE.xwb 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\AE.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading process has been COMPLETED!
------------------------------------------------------------------------------- 
------------------------ SIMULATION STOPPED ------------------------ 
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
 

PS:  I own way too many airports.  😞

Share this post


Link to post
Share on other sites

Hey Gollumn65,

You can try excluding the "WFSH" airport ID from UGCX, by going to UGCX main menu, then in options there is a category named "Scenery Cache", inside, there is an option named "Airport/Scenery exclusion", you just need to write the "WFSH" id (without the quotes) and select the "Airport Exclusion" type, then Save, it will tell UGCX to exclude the ID, so it doesnt takes into account.

Try that and let us know.

Cheers,

Manuel


spacer.png

Share this post


Link to post
Share on other sites

I'll try it the next time I'm there.  The first time this happened though, the UGCX menu wouldn't even come up.  I just got "No airport here" or something to that effect in red in the top left corner of the sim.

Share this post


Link to post
Share on other sites

Excluding WFSH did seem to fix Hong Kong.  But now I'm having the same problem with Imaginesim Singapore (WSSS).  Here's the log from this morning:

 

------------------------ INITIALIZATING FS MODULE ------------------------ 
            It's a supported Flight Simulator:        [11]...
            Hooking to the Flight Simulator's MAIN window procedure...
            Registering CUSTOM windows messages...
            Reading the INITIALIZATION file...
            Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths...
            Reading settings from the FSX.CFG or PREPAR3D.CFG file located here: 
            C:\Users\gollu\AppData\Roaming\Lockheed Martin\Prepar3D v5\Prepar3D.cfg 
            The Flight Simulator's frame rate LIMIT is 0 fps...
            Creating our timer...
            Current language ID:    [409]    
            Current sound pack:         US        
            Retrieving UGCX module's version...
            Running UGCX module's version: Version: 2.0.0.0
            Attempting to connect to the Flight Simulator...
            CONNECTED! to Flight Simulator...
            Mapping Flight Simulator's events...
            Setting up data definitions...
            Registering delayed events...
            Initializating scenery reader system...
            Verifying the Flight Simulator's SCENERY configuration...
            Reading the SCENERY.CFG file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\Scenery.cfg]  
            Reading the ADD-ONS.CFG file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\add-ons.cfg]  
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\FSLabs\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Program Files\Imagine Simulation\WSSS Singapore P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Aerosoft A330 Pro V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Imaginesim Atlanta\KATL Atlanta P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\A2A\C172\A2A\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Milan Malpensa Professional V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Mega Airport Zuerich V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\Ecosystem\MKSTUDIOS\MK_Lisbon4\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\Ecosystem\MKSTUDIOS\MK_Dublin4\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Program Files (x86)\12bPilot\SODE\P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Sim-wings Anchorage Professional V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam PHNL\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam Addon Manager\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam KLAX_V2\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\Add Ons\Mega Airport Frankfurt Professional V5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam KDFW\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FsDreamTeam Exclude\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global BASE Pack\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Orbx Libraries\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global Vector\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Orbx ObjectFlow\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\KBUR Hollywood Burbank Airport\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\EDBH Barth Stralsund Airport\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\EDCG Rugen Airport\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\NA Southern California\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global Buildings HD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global TerraFlora v2\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\ORBX Library\p3dv5\Global Trees HD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the ADD-ONS.CFG file, located in: 
            [C:\Users\gollu\AppData\Roaming\Lockheed Martin\Prepar3D v5\add-ons.cfg]  
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\FlyTampa\Libraries\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\FlyTampa\Copenhagen\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [D:\P3Dv5\FlyTampa\Boston\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FSUIPC6\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\ActiveSkyP5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\LatinVFR Miami KMIAv5 P3dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\LatinVFR Baltimore KBWI P3dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\FLAI\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Chicago X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\LatinVFR San Diego v2 P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\New York City X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\NY Airports v2 X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KPHX\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KSFOHD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Common Library\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Gatwick Xtreme\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Heathrow Xtreme\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\UK2000 Edinburgh Xtreme\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KPDX\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Reality XP GTN\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KDEN\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - SEQM\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Flightbeam - KIAD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Airport Controller\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\gollu\Documents\Prepar3D v5 Add-ons\Mega Airport Prague\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'SCENERY_ADD-ONS.XML' file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\scenery_add-ons.xml]  
            Unloading the scenery index from memory...
            Updating the INITIALIZATION file...
            Creating aircraft's profile FONT...
            Module's initialization sequence COMPLETED!
------------------------------------------------------------------------------- 
--------------------------- LOCATION CHANGED --------------------------- 
--------------------------- LOCATION CHANGED --------------------------- 
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\A330-343.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\gollu\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\Aerosoft A333 RR Professional.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
--------------------------- LOCATION CHANGED --------------------------- 
            Aircraft's Model Name: [Aerosoft A333 professional SINGAPORE AIRLINES 9V-SSB] 
------------------------------------------------------------------------------- 
        GPS System - Nearest airport's ICAO ID: [XWSS]...
        Checking for updates, contacting FS2Crew server... 
        Updates check COMPLETED!... 
----------------------- UGCX API ----------------------- 
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- 
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        D:\P3Dv5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR ----------------------- 
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
                            The airport [XWSS] has been IGNORED because it doesn't have either: RUNWAYS, PARKINGS or TAXIWAYS! 
        Couldn't find ANY airport in the vicinity!...
        USER's aircraft model name: [Aerosoft A333 professional SINGAPORE AIRLINES 9V-SSB] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        1.35054186  degrees    
            +-> Longitude:        103.98280168  degrees    
            +-> Altitude:        6.710  meters    
            +-> True Heading:    152.962  degrees    
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading process has been COMPLETED!
------------------------------------------------------------------------------- 
------------------------ SIMULATION STARTED ------------------------ 
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\A330-343.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\gollu\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\Aerosoft A333 RR Professional.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
------------------------ SIMULATION STOPPED ------------------------ 
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
            Aircraft's Model Name: [Aerosoft A333 professional SINGAPORE AIRLINES 9V-SSB] 
------------------------------------------------------------------------------- 
------------------------ SIMULATION STARTED ------------------------ 
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\A330-343.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\gollu\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\Aerosoft A333 RR Professional.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [D:\Add Ons\Aerosoft A330 Pro V5\SimObjects\Airplanes\Aerosoft A333 RR Professional\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
            Aircraft's Model Name: [Aerosoft A333 professional SINGAPORE AIRLINES 9V-SSB] 
------------------------------------------------------------------------------- 
        ERROR! - Couldn't find the nearest airport to your current location!...
        USER's aircraft model name: [Aerosoft A333 professional SINGAPORE AIRLINES 9V-SSB] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        1.35054185  degrees    
            +-> Longitude:        103.98280168  degrees    
            +-> Altitude:        11.919  meters    
            +-> True Heading:    152.962  degrees    
        ERROR! - Couldn't find the nearest airport to your current location!...
        USER's aircraft model name: [Aerosoft A333 professional SINGAPORE AIRLINES 9V-SSB] 
        USER's aircraft CURRENT location: 
            +-> Latitude:        1.35054185  degrees    
            +-> Longitude:        103.98280168  degrees    
            +-> Altitude:        11.919  meters    
            +-> True Heading:    152.962  degrees    
 

Share this post


Link to post
Share on other sites

Hey gollum65,

Sorry by the delayed answer, try to exclude the "XWSS" airport, because it's detecting that one. Same procedure as before:

On 8/17/2020 at 8:15 PM, Manuel82 said:

by going to UGCX main menu, then in options there is a category named "Scenery Cache", inside, there is an option named "Airport/Scenery exclusion", you just need to write the "WFSH" id (without the quotes) and select the "Airport Exclusion" type, then Save, it will tell UGCX to exclude the ID, so it doesnt takes into account.

Cheers,

Manuel

 

 

 

 


spacer.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...