FLT and FLN Settings: models

[RXP 2,338]

With FLT/N multi-model capable gauges you're supposed to setup the panel.cfg with the generic gauge name (like Altimeter) and then use the "Config Tool" in order to set the specific model. The other single-model gauges don't need any particular model.

If you know the values you can also manually set the model up in the RXPFLT.ini and RXPFLN.ini files directly using notepad.exe

Here is a probably non exhaustive lists of these values:

FLT
Gauge Names (Models)

• rxpFLT!KI256
• rxpFLT!KI525
• rxpFLT!KA51
• rxpFLT!Airspeed
  (0: Generic 160 Kts, 1: Generic 200 Kts, 2: Beechcraft 260 Kts, 3: Cessna 200 Kts, 4: Generic 260 Kts)
• rxpFLT!TurnCoordinator
  (0: Generic, 1: Beechcraft, 2: Cessna, 3: STEC 30)
• rxpFLT!VerticalSpeed
  (0: Generic 2000 fpm, 1: Generic 4000 fpm, 2: Beechcraft 4000 fpm, 3: Cessna 2000 fpm, 4: Generic 3000 fpm, 5: Generic 6000 fpm)
• rxpFLT!Altimeter
  (0: Generic Dual, 1: Generic Single, 2: Cessna, 3: Generic Digital)
• rxpFLT!Gyro
  (0: Generic No HDG, 1: Generic, 2: Cessna Type1, 3: Cessna Type2)
• rxpFLT!Attitude
  (0: Generic Cyan/Gray, 1: Generic Blue/Gray, 2: Generic Blue/Brown)
• rxpFLT!Dimmer
• rxpFLT!AltHld

Sample RXPFLT.ini file:

Spoiler

[SETTINGS]
SimpleMouse=Off
Light=Standard
LightVC=Standard
Info.Text=255,255,96
Info.Back=0,0,0
Info.Reverse=Off
Dimmer=On
KI256.Popup=
KI256.FlightDirector=On
KI256.DrawRate=18
KI525.Popup=
KI525.DriftRate=3.0
KI525.DrawRate=12
KA51.Vertical=On
Airspeed.Popup=
Airspeed.Type=1
Airspeed.Mounting=0
Airspeed.DrawRate=18
Airspeed.VS0=52.0
Airspeed.VS1=64.0
Airspeed.VFE=123.0
Airspeed.VNO=167.0
Airspeed.VNE=196.0
Airspeed.VLE=154.0
Airspeed.VLE.Color=236,233,246
Airspeed.Red=185,71,59
Airspeed.Yellow=237,215,57
Airspeed.Green=86,144,60
Airspeed.User1.IAS=0.0
Airspeed.User1.Color=64,94,226
Airspeed.User2.IAS=0.0
Airspeed.User2.Color=237,215,57
Airspeed.User3.IAS=0.0
Airspeed.User3.Color=185,71,59
Altimeter.Popup=
Altimeter.Type=0
Altimeter.Mounting=2
Altimeter.DrawRate=15
Altimeter.50s=Off
Altimeter.inHg=Off
Altimeter.BaroZoom=On
Altimeter.Standby=Off
Altimeter.Indicators=Off
Attitude.Popup=
Attitude.Type=0
Attitude.Mounting=0
Attitude.DrawRate=18
Attitude.Card=0
Gyro.Popup=
Gyro.Type=0
Gyro.Mounting=0
Gyro.DrawRate=12
Gyro.DriftRate=10.0
TurnCoordinator.Popup=
TurnCoordinator.Type=1
TurnCoordinator.Mounting=0
TurnCoordinator.DrawRate=12
TurnCoordinator.S30BootTime=30
VerticalSpeed.Popup=
VerticalSpeed.Type=2
VerticalSpeed.Mounting=0
VerticalSpeed.DrawRate=18
VerticalSpeed.IVSI=Off

 

FLN
Gauge Names (Models) :

• rxpFLN!FDAP
• rxpFLN!ST55X
• rxpFLN!ST645
• rxpFLN!ST360
• rxpFLN!VOR1
  (0:GI102A, 1:GI106A, 2:KI203, 3:KI206, 4:KI208A, 5:KI209A)
• rxpFLN!VOR2
  (0:GI102A, 1:GI106A, 2:KI203, 3:KI206, 4:KI208A, 5:KI209A)
• rxpFLN!ADF
  (0:KI227, 1:STEC)
• rxpFLN!RMI
  (0:KI229, 1:KNI582)
• rxpFLN!Altimeter
  (0: Generic Dual, 1: Generic Single, 2: Cessna, 3: Generic Digital)
• rxpFLN!Manifold
  (0: Simple InHg, 1: Dual InHg/Fuel)
• rxpFLN!Dimmer

Sample RXPFLN.ini file:

Spoiler

[SETTINGS]
SimpleMouse=Off
Light=Standard
LightVC=Standard
Info.Text=255,255,96
Info.Back=0,0,0
Info.Reverse=Off
Dimmer=On
VOR1.Popup=
VOR1.Type=1
VOR1.Mounting=0
VOR1.DrawRate=15
VOR1.OBS=Real
VOR1.FSOBS=Off
VOR1.AutoDisplay=Off
VOR1.GPS=On
VOR2.Popup=
VOR2.Type=3
VOR2.Mounting=0
VOR2.DrawRate=10
VOR2.OBS=Real
VOR2.FSOBS=On
VOR2.AutoDisplay=On
ADF.Popup=
ADF.Type=0
ADF.Mounting=0
ADF.DrawRate=15
ADF.HDG=Real
ADF.Simulation=Real
ADF.ParkNeedle=Off
ADF.Slaved=Off
ADF.AutoDisplay=Off
ADF.Channel=1
RMI.Popup=
RMI.Type=1
RMI.Mounting=2
RMI.DrawRate=15
RMI.Simulation=Real
RMI.ParkNeedle=Off
RMI.ADF.Channel=1
RMI.VOR.Channel=1
RMI.ChannelSwap=On
ST55X.Popup=795
ST55X.MaxVS=1800
ST55X.MaxAlt=30000
ST645.Popup=
ST360.Popup=
Altimeter.Popup=
Altimeter.Type=1
Altimeter.Mounting=0
Altimeter.DrawRate=15
Altimeter.50s=Off
Altimeter.inHg=Off
Altimeter.BaroZoom=On
Altimeter.Standby=On
Altimeter.Indicators=Off

 

 

Edited August 26, 2020 by RXP