November 6, 20205 yr No issues with the former 2080 Ti. But with my new 3090 one screen goes to black when Applying NVsurround. Both displays (4K) are set to the same resolution. Tried again with the 2080 Ti : perfect NVsurround. Anyone experienced this with the 3090 ? Edited November 6, 20205 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
November 7, 20205 yr Goes black as in powers down or goes to standby like it's lost a signal or goes black in terms of can still move mouse over it, it's just a black screen? Have a Wonderful Day -Paul Solk
November 7, 20205 yr Author Goes black like it has lost it’s signal. https://www.dropbox.com/s/94mhkqlyhgvzz3r/Foto 07-11-2020 09 10 07.jpg?dl= https://www.dropbox.com/s/vlgoko1obgq8zoy/Foto 07-11-2020 09 10 30.jpg?dl=0 Both monitors to 3840x2160 @30 hertz Then Configure surround On the tab both are assigned Resolution shows : 8192x2160 @60 hertz I choose 30 hertz Enable Surround - - - The main monitor stays at 3840x2160 The second monitor goes black and shows 4096x2160 At the bottom it shows , Surround Enabled Surround resolution: 4096x2160 Only 1 monitor is seen - Disableing NVSURROUND —> second monitor shows an image again Edited November 7, 20205 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
November 7, 20205 yr 16 minutes ago, GSalden said: Goes black like it has lost it’s signal. https://www.dropbox.com/s/94mhkqlyhgvzz3r/Foto 07-11-2020 09 10 07.jpg?dl= https://www.dropbox.com/s/vlgoko1obgq8zoy/Foto 07-11-2020 09 10 30.jpg?dl=0 Both monitors to 3840x2160 @30 hertz Then Configure surround On the tab both are assigned Resolution shows : 8192x2160 @60 hertz I choose 30 hertz Enable Surround - - - The main monitor stays at 3840x2160 The second monitor goes black and shows 4096x2160 At the bottom it shows , Surround Enabled Surround resolution: 4096x2160 Only 1 monitor is seen - Disableing NVSURROUND —> second monitor shows an image again At the point it blacks out the maximum surround resolution you can select is 4096x2160 and it does work until you choose 30Hz? Have you tried the simple solutions first? Rebooted with Surround enabled at 60Hz then try 30Hz? Try another port on the GPU? Unplug/Replug video cable on GPU after enabling surround? Are these the same cables you used with the 2080? That would rule out a cable issue. Have a Wonderful Day -Paul Solk
November 7, 20205 yr Author 16 minutes ago, psolk said: At the point it blacks out the maximum surround resolution you can select is 4096x2160 and it does work until you choose 30Hz? Have you tried the simple solutions first? Rebooted with Surround enabled at 60Hz then try 30Hz? Try another port on the GPU? Unplug/Replug video cable on GPU after enabling surround? Are these the same cables you used with the 2080? That would rule out a cable issue. Tried all the tricks but no luck. I tried with HDMI : 1+2 / 1+3 / 2+3. Un-replugging I did not try yet. Will do that tomorrow. If I put back in the 2080 Ti it works right away. No change in cables and displays. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
November 7, 20205 yr Frustrating I'm sure... And it does work until you go to 30Hz? Have a Wonderful Day -Paul Solk
November 7, 20205 yr Author 2 minutes ago, psolk said: Frustrating I'm sure... And it does work until you go to 30Hz? No ,none of the frequencies work. With the 2080 Ti the maximum that card could handle was 2x 4K @ 30 hertz. Anything higher and both screens turned into dark purple ( 2x 4K = 8x 2K ).. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
November 8, 20205 yr Author HDMI issues are known : https://www.techpowerup.com/273852/bug-in-hdmi-2-1-chipset-may-cause-black-screen-on-your-xbox-series-x-console-or-nvidia-gpu 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
Archived
This topic is now archived and is closed to further replies.