WT G3000 Issue

I am using WT G3000 v0.3.2 in the TBM 930. After entering a flight plan, the PFD shows the correct first waypoint and distance, and the 'top' of the MFD indicates the same correct distance to the first waypoint, but the magenta course line on the MFD is not correct and does not go to the first waypoint. The flight plan listing of waypoints on the small screen below the MFD is correct. After taking off, if I engage the AP, the AP seems to be following the incorrect course line on the MFD.

Any suggestions?

Thanks,

Al

EDIT:  Problem seems to be caused by a conflict with the mod aircraft-tbm930-improvement. 

Edited December 4, 20205 yr by ark