April 7, 20215 yr I made this request on Peter Dowson's Support Forum. Unfortunately, WideClient is no longer supported for FS9 (FS2004). The Dowson's were kind enough to reply anyway suggesting an incorrect IP address, or firewall prevention. The best and biggest advice was as always to Read the manual. So I decided to post this on Avsim to see if possibly anybody else had been down this road and had any other suggestions. Framerates have slowed down over time for me at high density locations in FSX and I have not yet searched for the cause yet. It's been a long time, so I thought I would install FS2004 again and take a peek. It flies beautifully anywhere. I realize scenery is nowhere near what it is in FSX even with UT, FSGenesis, and a number of other addons, but at high altitudes this becomes somewhat academic. For low and slow, I will stick to FSX. I have the Dreamteam, Simflyers, and quite a few more third party airports, so that is not much of an issue. It's kind of fun, particularly to be able to fly the Dreamfleet 727 and Baron along with a few other old favorites that didn't make it to FSX. My problem is as follows: FSX and FS9 are installed on unique harddrives on my primary computer. I have FlightSim Commander installed on a secondary computer. Implemented by the FSUIPC / WideClient programs (Peter Dowson). I cannot get WideClient to connect to FS2004. Note that everything works beautifully in FSX with no problems at all, so we know both computer talk to each other. I don't quite have it memorized yet, but I have been over the manual repeatedly for the past few days, I have downloaded and reinstalled FSUIPC 3.999z9 and WideFS6 (several times). I am sure the specified files are installed in the correct locations. Surely I wouldn't make the same exact mistake or typo so many times. I also double checked after each step. My IP Address is correct. Antivirus and Firewall provisions have been disabled. I have restarted both computers after every step. Although it proved futile, I did edit the WideClient.ini file to include ServerName=Office-PC (The host computer server name), and Protocol=TCP as instructed on page 4 of the manual as a possible solution. Any suggestions? Respectfully: RTH Attachments: ********* WideClient Log [version 7.159] Class=FS98MAIN ********* Date (dmy): 07/04/21, Time 10:52:19.261: Client name is SECONDARY-PC 1030 Attempting to connect now 1061 LUA: "C:\Wideclient\Initial.LUA": not found 1342 Trying TCP/IP host "Office-PC" port 8002 ... 1342 ... Okay, IP Address = 192.168.1.20 22355 Error on client pre-Connection Select() [Error=10060] Connection timed out 22355 Ready to try connection again 23416 Attempting to connect now 67720 Trying TCP/IP host "Office-PC" port 8002 ... 67720 ... Okay, IP Address = 192.168.1.20 134333 Trying TCP/IP host "Office-PC" port 8002 ... 134333 ... Okay, IP Address = 192.168.1.20 200633 Trying TCP/IP host "Office-PC" port 8002 ... 200633 ... Okay, IP Address = 192.168.1.20 267542 Trying TCP/IP host "Office-PC" port 8002 ... 267542 ... Okay, IP Address = 192.168.1.20 333858 Trying TCP/IP host "Office-PC" port 8002 ... 333858 ... Okay, IP Address = 192.168.1.20 400205 Trying TCP/IP host "Office-PC" port 8002 ... 400205 ... Okay, IP Address = 192.168.1.20 466459 Trying TCP/IP host "Office-PC" port 8002 ... 466459 ... Okay, IP Address = 192.168.1.20 532791 Trying TCP/IP host "Office-PC" port 8002 ... 532791 ... Okay, IP Address = 192.168.1.20 599060 Trying TCP/IP host "Office-PC" port 8002 ... 599060 ... Okay, IP Address = 192.168.1.20 665329 Trying TCP/IP host "Office-PC" port 8002 ... 665329 ... Okay, IP Address = 192.168.1.20 WideClient.ini [Config] Port=8002 Window=-8,-8,1296,736 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=1000,1000 PollInterval=2000 Port2=9002 ReconnectMinutes=0 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 ServerName=Office-PC Protocol=TCP ; ----------------------------------------------- [User] Log=Errors+ ; =============================================== [Sounds] Path=C:\Wideclient\Sound\ Device1=Primary Sound Driver Device2=Digital Audio (S/PDIF) (2- High Definition Audio Device) ******* WideServer.DLL Log [version 6.995] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 07/04/21, Time 10:42:31.560: Server name is OFFICE-PC 22168 WideFS cannot be used until it is Registered through FSUIPC (version 3.44 or later) 11771788 Closing down now ... Memory managed: Offset records: 0 alloc, 0 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* WideServer.ini onfig] Port=8002 AdvertiseService=1 AutoRestart=0 AutoUpdateTime=13 MaximumBlock=4096 NoStoppedRestarts=Yes Port2=9002 RestartTime=10 SendTimeout=15 TCPcoalesce=No [ClientNames] 1=SECONDARY-PC ; ----------------------------------------------- [User] Log=Errors+ ; =============================================== FSUIPC.log ******* FSUIPC, Version 3.999z9b by Pete Dowson ********* Running on Windows Version 5.1 Build 2600 Service Pack 2 Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="free user" User Addr="[email protected]" FSUIPC Key is provided WIDEFS not user registered, or expired Module base=61000000 WeatherReadInterval=4 LogOptions=00000001 DebugStatus=15 2059 System time = 07/04/2021 10:42:31 2059 F:\Program Files (x86)\Microsoft Games\Flight Simulator 9\ 2059 System time = 07/04/2021 10:42:31, FS2004 time = 12:00:00 (00:00Z) 4040 C:\Users\Office\Documents\Flight Simulator Files\KMYR Default.flt 4056 AIRCRAFT\beech_baron_58 New\Beech_Baron_58.air 4056 Aircraft="Beech Baron 58" 7534 C:\Users\Office\Documents\Flight Simulator Files\KMYR Default.flt 7644 Clear All Weather requested: external weather discarded 14789 Advanced Weather Interface Enabled 14789 Traffic File #19 = "scenery\world\scenery\traffic030528" 15007 Traffic File #20 = "scenery\world\scenery\traffic_pai" 11773005 System time = 07/04/2021 13:58:42, FS2004 time = 15:27:36 (19:27Z) 11773005 *** FSUIPC log file being closed Memory managed: 0 Allocs, 58071 Freed ********* FSUIPC Log file closed *********** FSUIPC.ini TrapUserInterrupt=Yes NavFreq50KHz=No ClockSync=No SmoothIAS=Yes SetVisUpperAlt=No VisUpperAltLimit=6000 MaxIce=3 MinIce=-1 WindSmoothingDelay=0 WindSmoothAirborneOnly=No LimitWindVariance=No VisSmoothingDelay=0 VisSmoothAirborneOnly=No TrafficControlDirect=Yes SuppressCloudTurbulence=No SuppressWindTurbulence=No SpoilerIncrement=512 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes TCASid=Flight TCASrange=40 TrafficScanPerFrame=10 AxesWrongRange=No AxisCalibration=No CentredDialogue=Yes ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No ClearWeatherDynamics=Yes OwnWeatherChanges=No FixWindows=No FixControlAccel=No WeatherReadInterval=4 MoveBGLvariables=Yes TimeForSelect=4 WeatherReadsFast=No LuaRerunDelay=66 MainMenu=&Modules SubMenu=&FSUIPC ... [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=0 RudderTrimControl=0 CowlFlaps1Control=0 CowlFlaps2Control=0 CowlFlaps3Control=0 CowlFlaps4Control=0 MaxSteerSpeed=60 [Sounds] Path=F:\Program Files (x86)\Microsoft Games\Flight Simulator 9\Sound\ Device1=Primary Sound Driver Device2=Speakers (Realtek High Definition Audio) Device3=Realtek Digital Output (Realtek High Definition Audio) [Buttons] ButtonRepeat=20,10
April 7, 20215 yr Commercial Member >> 22168 WideFS cannot be used until it is Registered through FSUIPC (version 3.44 or later) Cheers! Luke Kolin I make simFDR, the most advanced flight data recorder for FSX, Prepar3D and X-Plane.
April 8, 20215 yr Author Thanks so much for the reply Luke. I got my hopes up even though I new this was not solution.. On the last round where I reinstalled everything, I just forgot to register it. On earlier tries I registered with my old key after quite a search to find it. Thereafter I have used the free key provided on the FSUIPC download page, IUT7 DBMK 1EU!1 (Being that it is free and published I assume it is alright to list it here.) I just registered again, and have waited for an hour and am still getting "Waiting for a connection". I do show registration in the FS9 modules display now in FS2004. Thanks again, but I fear this is not the solution,. RTH
April 8, 20215 yr Author Attached is my latest fusipc.log showing that WideFS is now registered. ********* FSUIPC, Version 3.999z9b by Pete Dowson ********* Running on Windows Version 5.1 Build 2600 Service Pack 2 Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="free user" User Addr="[email protected]" FSUIPC Key is provided WideFS Key is provided Module base=61000000 WeatherReadInterval=4 LogOptions=00000001 DebugStatus=255 2028 System time = 07/04/2021 20:45:37 2028 \\OFFICE-PC\F\Program Files (x86)\Microsoft Games\Flight Simulator 9\ 2028 System time = 07/04/2021 20:45:37, FS2004 time = 12:00:00 (00:00Z) 3915 \\OFFICE-PC\Users\Office\Documents\Flight Simulator Files\KMYR Default.flt 3931 AIRCRAFT\beech_baron_58 New\Beech_Baron_58.air 3931 Aircraft="Beech Baron 58" 7644 \\OFFICE-PC\Users\Office\Documents\Flight Simulator Files\KMYR Default.flt 7862 Clear All Weather requested: external weather discarded 9906 Advanced Weather Interface Enabled 15007 Traffic File #19 = "scenery\world\scenery\traffic030528" 15350 Traffic File #20 = "scenery\world\scenery\traffic_pai" I also realize I had a typo in the key from the download site. the "!" does not belong and should be deleted Regards: RTH
April 8, 20215 yr Author Mystery of mysteries! I guess it was just Murphy. Got up this morning, clicked on WideFS, started FS2004, and WideClient immediately connected. RTH
April 8, 20215 yr Commercial Member I suspect your firewall, or DHCP gave out a different (correct) server IP address. How do you handle IP addresses on your network? Cheers! Luke Kolin I make simFDR, the most advanced flight data recorder for FSX, Prepar3D and X-Plane.
Archived
This topic is now archived and is closed to further replies.