Local NavAids missing in manual FMS entry but work in plans

PC/Steam 
The following problems occur with stock G1000 and G3000 as well as the G1000Nxi and WTG3000.  All my WT mods are the most current available.    I have seen this problem in the C172/G1000, G36, G36 Turbo, TBM 930, Improved TBM 930

Three days ago - none of these problems were occurring. 

ILS/Loc, VOR1, and VOR2 are tuned properly but  every PFD display shows "no data" - even when flying directly toward a VOR at short range or on final approach, directly in line with ILS at the correct altitude.  There is nothing I can do to make ILS/VOR work. 

The NAV1 and NAV2 speaker makes no morse code sound thus indicating they are not receiving any data.  

The FMS will accept a flight plan from the World Map or loaded from a file (e.g. downloaded from SimBrief) and will fly the plane on that plan.  The G3000 can fly a STAR and provides good VNAV guidance.  The G1000 works perfectly as it follows a flight plan.  The plan can be as complex as necessary with dozens of fixes/waypoints. 

BUT - I cannot make Direct To work as needed (it had been working perfectly until very recently).  If I enter a unique FIX ID (e.g VP400) the FMS says it cannot find that fix (despite it being in the active fix in the flight plan).  If I enter a FIX ID that exists somewhere else in the world, i.e. other than where I am flying, the FMS can find the remote fix (even if the remote fix is in the US where I am). The FMS does not find the FIX that Navigraph or the Nearest function in the G3000 shows to be local to my flight when I try to manually enter the FIX ID into the FMS. 

If I try to add a waypoint to the flight plan (while in flight) - I am told the waypoint does not exist - despite it appearing in Navigraph and Nearest in the G3000.

The flight plan includes a destination airport, e.g. KBUR, but when I try to load an arrival or approach - the FMS will only display the VISUAL approaches.  RNAV and ILS or VOR approaches are never displayed, even at monsters such as LAX.

In World Map - all SIDS, STARS, Approaches are AUTOMATIC - I cannot specify a procedure even in Low or High Altitude flight plans. 

But - IF I create a SimBrief approach with a STAR and ILS or RNAV approach and save it to the Sim - then when I load that flight plan into the plane to fly - it works perfectly.  When I load flight plans which, I created last week or last month in World Maps flight planner - they load and work perfectly but I cannot recreate the .pln if I want an approach or arrival. 

In summary - when flight plans are created with fixes the FMS uses them.

When I try to manually reference a Fix or Intersection in the Sim (G1000 or G3000) the FMS does not recognize the fix - even when it appears in the Nearest List.

Any ideas?