July 29, 20223 yr Hello anybody, I've tried this scenario three times and was able to repeat it. Setup on runway, all avionics are active, as soon as I initiate the takeoff roll the PFD and all avionics go blank. Nada, nothing. My yoke is a Honeycomb, and all the switches are as they should be. Any ideas Tom
July 29, 20223 yr 14 minutes ago, jetmakr said: Hello anybody, I've tried this scenario three times and was able to repeat it. Setup on runway, all avionics are active, as soon as I initiate the takeoff roll the PFD and all avionics go blank. Nada, nothing. My yoke is a Honeycomb, and all the switches are as they should be. Any ideas Tom Check switch 46/47. Alvega CPU: AMD 7800X3D | COOLER: Cooler Master MasterLiquid 240L Core ARGB | GPU: RTX 4070 TI Super 16GB OC | Mobo: ASUS TUF GAMING X670E-PLUS WIFI |RAM: 32 GB Corsair Vengeance RGB DDR5 6000MHz PC5-48000 2x16GB CL36 | SSDs: WD Black SN770 2TB NVMe SSD (WIN11), WD Black SN850X SSD 2 TB M.2 2280 PCIe Gen4 NVMe (MSFS), Crucial MX500 2TB (Other stuff) | CASE: Forgeon Arcanite ARGB Mesh Tower ATX White | Power Supply: Forgeon Bolt PSU 850W 80+ Gold Full Modular White
July 30, 20223 yr Author Thanks for the reply. I don't see those switches and I'm probably not looking at the right location. I might have more going on here than just the Baron though. I just gave the DA-62 a go and I got the same issue. Went black shortly after rotate. Is it possible that I have an issue with the G-1000.
July 30, 20223 yr 10 minutes ago, jetmakr said: Thanks for the reply. I don't see those switches and I'm probably not looking at the right location. I might have more going on here than just the Baron though. I just gave the DA-62 a go and I got the same issue. Went black shortly after rotate. Is it possible that I have an issue with the G-1000. Aren't you using Honeycomb Bravo? I think your problem is a conflict with the bindings. You have some switch that is turning off the avionics, and it's usually switch 46/47. Are you sure you are not pressing anything when the problem happens? Like releasing the parking brake, since you said you start on the runway? Alvega CPU: AMD 7800X3D | COOLER: Cooler Master MasterLiquid 240L Core ARGB | GPU: RTX 4070 TI Super 16GB OC | Mobo: ASUS TUF GAMING X670E-PLUS WIFI |RAM: 32 GB Corsair Vengeance RGB DDR5 6000MHz PC5-48000 2x16GB CL36 | SSDs: WD Black SN770 2TB NVMe SSD (WIN11), WD Black SN850X SSD 2 TB M.2 2280 PCIe Gen4 NVMe (MSFS), Crucial MX500 2TB (Other stuff) | CASE: Forgeon Arcanite ARGB Mesh Tower ATX White | Power Supply: Forgeon Bolt PSU 850W 80+ Gold Full Modular White
July 31, 20223 yr Author Alvega ..... thanks for the reply. I have the Honeycomb Alpha yoke only. I have the park/brakes setup on button 3. I use switch 17/18 for Avionics Bus 1 on/off & 19/20 for Avionics Bus 2 on/off. Bus 1 controls the PFD and Bus 2 controls the Nav display. I have a Saitek Throttle Quadrant and I show issues with that also in 2020, like.... the prop pitch does not go end to end in the fill box when looking at the joystick axis y movement. It goes half way across. When I look at the sensitivity , doing a reset on y axis, the motion goes in a linear direction from midpoint to top right. I have checked my throttle quadrant in Device Manager using the Windows calibration function and it is smooth from one extreme to the other. I'm perplexed. I don't have any controller issues in X-Plane 11. Frustrating.
Archived
This topic is now archived and is closed to further replies.