Hi everyone, I've been struggling with the following issue for the past few days and come here in the hope of finding someone able to help me.

My video setup is composed of a total of 9 screens, two of which are projectors whose images need to be warped to fit a cylindrical screen. I'm using Fly Elise Immersive Calibration Pro/Display Pro softwares to achieve this goal. While the warping part seems correct in the calibration software, the perspective is incorrect. This translates in P3D, the warping does work but does not provide the correct FOV.

You can find pictures and a video of the issue using this google drive : https://drive.google.com/drive/folders/1MhtmlZN5-GYTav3gkxC577SNlkpDiBvV?usp=sharing. As you will probably be able to tell, the leading lines are way too strong, making it look like the runway converges to a specific point.

I've double checked all the screen measurements and everything I've imputed appears to be correct. Still, the problem persists. If someone ever used Fly Elise and had this issue, I'd be glad to receive some help.

 

Some hardware info: The two projectors are not connected to the same graphic card (which is intended to split processing power) and are bridged in SLI.

 

Fly safe!

 

 

 

I'm not able to access your images on google drive. It appears a credential is required so if you want anyone to help you may want to publicly share your images.

Please ignore my previous reply where I only reposted the same link (maybe deleted by moderators). I'm new to forums and sometimes struggle a bit with them. Anyway, I have now edited the folder to allow anybody to access the pictures. You can use the same link as provided in the original post.