August 1, 20232 yr Hey guys! I have a problem with Auto Thrust. Main Problem: Auto Thrust is decreased when i fly at 200ft for landing. After than Auto Thrust is increased within nomal Thrust power for MCP landing speed. Condition: 1: Auto Thrust on / Flap 30 / Gear Down 2: set up with FSI Panel: RKSS or RKSI or RKPC (I did not use other airports)/ Vector 8NM Final Left or Right off set position. Another setting is only basic setting with FSI Panel. 3: I set Destination Airport, approach and W/B at FMC. 4: it appears it about 20% time of all landing time. how could i overcome the problem? do you guys have same problem? If you know it, let me know!! Thank you.
August 1, 20232 yr Author Ah! My program is P3D V5 and QW787 Quote 1: Auto Thrust on / Flap 30 / Gear Down 2: set up with FSI Panel: RKSS or RKSI or RKPC (I did not use other airports)/ Vector 8NM Final Left or Right off set position. Another setting is only basic setting with FSI Panel. 3: I set Destination Airport, approach and W/B at FMC. 4: it appears it about 20% time of all landing time. how could i overcome the problem? do you guys have same problem? If you know it, let me know!! Thank you.
August 2, 20232 yr Hi, I have some questions for you: What is selected in the FMC on the Approach page for your speeds/flaps setting and what is your landing weight for the QW787? Do you apply the Vref +5kts on the MCP? I assume A/T is on but A/P is off when landing? P3D version ??? SpoilerSystem specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttleNow built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus Dual RTX 4070 Super OC 12Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | WD SA510 4Tb |beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator X34P 3440x1440pMark AldridgeMSFS2024 SU5 & P3D v5.3 HF2
Archived
This topic is now archived and is closed to further replies.