Babu

Hello,I am to this day unable to close FSX without a CTD with the Ariane 737-700ER X2.5.I don't see any post at Ariane's fourms about the issue of FSX closing with a fatal error on exit with the Ariane 737-700ER x2.5.thanking You,best regards,Aftab.

Hello,Second request actiivation key recived today, 737-700er X 2.5 acting the same way,no change at all,FSX crah on exit with g3d.dll fault. Anyway to fix this?.Thanking you,Best RegardsAftab.

Hello,It is now a second day without the second activation request to Ariane 737 software company,guess what? No activation key yet.In the foregoing events, I have to backup and move the second virgin install of windows 7 and FSX plus installed copy of Ariane 737 to the conventional Harddrives from my SSD harddrives, so I can prepare my SSD harddrives for better performing software both older as well as upcomming software from PMDG etc, and pull it away from my computer until the second activation key is recived and we are ready to fly the Ariane737 normally, by that I mean no CTD's in anyway or forms. In the above events is the current installed copy on my conventional Harddrives of Ariane 737 will trigger yet a third request for activation key, and wait another seven days or so?.Thanking You,Best regards,Aftab.

Hello,I am reading something new in here regarding FSX itself, I was not even aware of FSX being buggy in itself, the way it interacts with other software addons.(I have not brought any other single software addon that would crash my copy of FSX on exit or on start except Ariane 737-700ER, even their 737-900X dosent act this way). At least the FSX software developers should inform their would be potential coustomers to know this before hand, that their software is going to crash FSX upon exit or switching through diffrent FSX aircraft,and that this should be expected from their software as it is normal.It would be easy for any coustomers to make a informed decision to buy and live with these addons as is, if they so desire, or simply not to buy at all, rather then later they come to know and realize that it would crash their copy of FSX and it was not what they were looking for.Thanking you,Best regards,Aftab.

Hello,Every fourms have their own rules, I read somewhere on Ariane fourms, and according to that, they do not allow the buyers to request installation files through their fourms, all request must go through their software support section.If a complete set of installation files were even emailed to me at the time of purchase,how a buyer is suppose to know if three,four or five set of files will give a correct and complete installation or simply two set of files will complete everything required for a flawless installation.Even installer with defect were emailed?, which maybe causing the fatal error crash on a virgin installation of windows 7 and FSX.Thanking You,Best regards,Aftab.

Hello,I got a response from Ariane only a few minutes back about a earlier support request I made to them about this issue regarding their 737-700ER X2.5.installations.According to their response, I have to wait addtionall 3-5 business days just to see what is causing the install problems with their 737-700ER X2.5.,let alone the new re-activation request already submitted to them (No response on that yet).Thanking You,Best regards,Aftab.

Hello,1. Purchased Ariane 737-700ER X2.5 got three installation files in the email(Base pack, Airline Pack, and the Manual).2.Installed the files in FSX, started FSX with the default 737, switched to Ariane 737-700ER no landing gear and panel lights showing up (okay you have to activate the software) after reading and following the steps in the manual how to activate your copy of the software wait while you get your activation key through email within 48 hours or so.Switch back to default 737, FSX crashed with fatal error. Restarted FSX with default737 switched back to Ariane 737-700ER X2.5 without touching any controls, and decided to closed FSX, FSX closed with fatal error.3. Got activation key through email, restarted FSX and inserted in the activation key according to instructions in the manual,okay the 737-700ER X2.5 finally showed up with landing gears and panel lights. Decided to switch back to default 737, FSX crashed with fatal error. Restarted FSX with default 737 and switched back to Ariane 737-700ER X2.5 did a short flight without switching planes within FSX, decided to close FSX, FSX again crashed with fatal error.4.Reformatted harddrive and reinstalled windows 7 64 bit with virgin copy of FSX deluxe and Acceleration Pack, and of course nothing else to make sure no other software is causing any problems with Ariane 737-700ER X2.5, and then reinstalled Ariane 737-700ER X2.5 back again, step#2 in the post was repeated again and no change.5.Sent an email to Ariane for a re-activation request no response from Ariane 737-700ER X2.5 software company.Thanking You,Best Regards,Aftab.

Hello,My purchase of Ariane Design 737-900ER X2 for Microsoft Flight Simulator X have now been activated. Thank you Ariane Design.Best Regards,Aftab.

Jeff,I am unable to log into Ariane's owners fourm, because there is no such link provided in any of the email through Ariane.Thanking You,Best Regards,Aftab.

Hello,Its been day seven today, with several email attempts for a activation key on my new purchase of Ariane Design 737-900ER X2 model,I have had no activation key from Ariane Design yet.Thanking You,Best Regards,Aftab.

Hello Dan,I changed the name for LSZH.txt file to LSZH.bak, and verify and confirm that "LSZH: Err OSDAN unknown" message is not displayed anymore.Opening the text file for LSZH I see the author's name and email adress listed in it, and also, I see a refrence to OSDAN under approach VORDME 28. I will read Terry's guide on making the terminal procedures, kindly guide me where to make the required adjustment in the LSZH .txt file so the procedures are installed again without errors messages.Thanking You,Best Regards,Aftab.

Hello Terry, I do not remember which author's files I updated my navigation data with, as per Dan's advice I updated my navigation data files from Navdata's website, but the Error message is still there.Is there any particular procedure to redownload and replace the navigation data diffrently so the error message disappears. Thanking you,Best Regards,Aftab.

Ladies/Gentlemen,When entering KIAD as the departure airport and LSZH as the arrival airport on the route page in the FMC, a error shows up at the scratch pad in the FMC which reads, "Err: OSDAN unknown" as seen in the picture.Anyone knows what causing this, how to fix this error?.Thanking you,Best Regards,Aftab.

Ladies/Gentlemen,I think a genuine and very frequent re-validation of flightsim software products with some vendors still is very time consuming for whatever reasons they have.Thanking You,Best Regards,Aftab.

Hello,Can it be made possible to make the re-activation process for active camera more simpler, for example, like as we have form other addon manufacturers,where it is possible to re-activate a product instantly with a click of a button rather than exchanging emails back and forth to get it re-activated even with a minimal amout of time. Thanking you,Best Regards,Aftab.

Gentlemen,Thanks for your response.Best Regards,Aftab.

Ladies/gentlemen,What processing time frame to expect after sending in active camera product re-validation request. I have sent in two requests for a single product re-activation in the last 48 hours. Since then, I have re installed my system a new,and the the first two requests are no longer needed, which were never sent though.I have sent in a third fresh re-activation request for my new installation, and wondering when a validation will be sent via email.If you are familar with active camera validation process, let me know when to expect the new requested key.Thanking You,Best Regards,Aftab.

Hello, Please can you kindly let me know if this package could be installed through the "Ultimate traffic" AI program, if so, what addtinal steps are required to make it work in "Ultimate Traffic".Thanking You,Best regards,Aftab.

Gentlemen / Ladies,Fs painter AI models seems to deploy the thrust reverser and spoilers during the descend phase of the flight keeping it engaged all along, and through touchdown the condition continues. After the touch down roll the nose pitches up few more degrees , settling the nose wheel quite awhile later for a long pitched up touchdown run, and finally it deactivates the thrust reversers and spiolers when the speed reduces during the run.The models are utilized with Ultimate trrafic AI program, other AI aircraft does not exhibith this kind of behaviour with Ultimate trrafic.Any way to fix this condition? must it remain as is?.Thanking You,Best Regards,Aftab.

Gentlemen / Ladies, When a panel clickspot is clicked during a flight to go through different panel views, the last position of the plane on the ground is displayed first, before seeing the actual panel view requested. Anyone know why this is happening, and how to fix this if possible.Thanking You,Best regards,Aftab.

Gentlemen / Ladies, It may make it much better to follow, if the concorde tutorial includes a picture relating it to a checked items, for example on page 82 and 83 of the tutorial the checklist may include and display with a picture where to check and confirm the checklist settings described on the panels.Thanking You,Best Regards,Aftab.

Hello Pwal, You are welcome, lucky me, reinstalling Active Sky 2004 back again does not seems to duplicate the startup problems, guess what?, everything is now operating normally as was designed and developed.Thanking You,Best Regards,Aftab.

Hello Pwal, Thank for your response, while your response seems informative and it may have fixed defects related to those specifics, however, I found the fix for my premature shut down of the flightsim by accident,belive it or not,without searching and tracing into any technicalties, I unistalled the ActiveSky 2004 weather generating program from my system, and viola, the flightsim is up and running as better as it was developed by microsoft.The question this time remains however, will the Flightsim be up and running again if I reinstall Active Sky 2004 to my system?.Thanking You,Best Regards,Aftab.

Hello Bursco, Thanks for your response, but, rebuilding FS 9.cfg file does not seems to fix this defect.Thanking You,Best Regards,Aftab.

Gentlemen / Ladies,After intial display of splash screen at startup, there is no loading of FS 9, instead the splash screen disappears without any error messages.Any ideas what is defective?Thanking you,Best regards,Aftab.