steinbach72

Hi,I have 2 questions regarding BAe 4100.1. Is pushback gauge implemented ? I did not find it.2. Where is panel state saving/loading possibilty ? And finally one small note. I miss key mapping possibility very much. For example assigning ALT a HDG knobs is very usefull for me, because when I rotate these knobs i VC, the values on PFD are too small to control values. ThanksJiri Steinbach, Prague

>Hi There>>I was wondering if there are other people who are having>problems with the combination VOCATC en FSBUILD.>>When i create a plan with FSBUILD and try to enable voxatc i>get a "Fatal error" on voxatc. Wen i create a plan with MSFS>flightplanner there is no problem.>>Strange. I there a solution?>>Thanx>>>Gilles>Ps: sorry for my poor englishHi,I had the same problem. The solution is to create FS Build plan [in XML format], then open FSX, open flight plan in flight planner and save it again {may be with the same name}. Then Vox ATC accept it.Best RegardsJiri

Hi,1. I am not able to set SID and STAR with VoxATC 5.55. I still hear: "proceed to first waypoint". I set SID/STAR, then load another VoxATC flight, then close FSX and load flight with SID and STAR. 2. In previous version I heard: "proceed direct to ..waypoint name.."Controller use still "first waypoint" now. Can anybody tell me why ? Is there any change in v. 5.55 ?????Thanks for your help. Jiri

Hi, I have problem with VoxATC X 5.55 [and 5.5]. I run indexer after installation, but when I want to fly from EDDP [Leipzig-Halle from Aerosoft], I receive taxi clearance to rwy 26 or 28, but in this airport are rwys 08 L/R and 26 L/R, When I change weather, still the same. Taxi guidance show me the strange way. The similar situation I have with Tenerife North airport from Sim Giants. I don`t know why ?When I use default ATC form FSX, I always receive correct runways at these airports.Thanks for help.Jiri Steinbach, Prague

Hi,I have installed FSX version of PMDG 747 and then FSX to FS9 update, because I still use Fs9 very often. But after updating, all radios disappeared in Fs9 {no numbers on screens}. So I uninstalled FSX version and Fs9 version subsequently, but during removing operation {via remove programs} I lost electrial power at home and uninstall operation was incomplete. If I want to install Fs9 version of PMDG 747 again now, the installer still announce me, that I have version 1.1 installed and I can not proceed. But uninstall is impossible too. Is any way, how to solve it? Where is located file, which tell setup.exe about last version? I dont want reinstall OS !!!!!Thanks Jiri

Hi,I dont know, how to set TOGA in PMDG 747 [FS2004] when flying from VC. Is there any clickable area like in 2D panel, or have I to assign TOGA to joystick or keybord ?ThanksJiri

Hi,I use VoxATC UK for FS2004 and I have following problem. When I start AI interaction (via multiplayer), FS2004 crashes after 2-5 minutes. When I run VoxATC without it, all run well. I set everything by help file. AI traffic inside FS set to zero, AI traffic inside VoxATC UK to 80%. I see aircrafts, hear communications, but FS2004 crashes, does not depend on choosen airport. When I connect AI during flight, situation is the same.Can somebody help me, please ?Best RegardsJiri

Hi,thank you very much for quick replies and suggestions. I am not novice in 737NG, I only reinstall it after about one year, I never met this problems before. 1. this flight was example only, I have the same problem in other airports. I dont understand, how it can be caused by AIRAC if coordinates disagree about many miles, it is not light shift only.Problem is, that if I enter i.e. 34R at KSEA, runway appear somewhere in the right bottom corner of ND, I need to use center option to see it, my airplane is in the center. 2. I fly this aircraft many times before, from dark and cold or from running engines, and I never had problem with AP. I look at the manuals again. of course, but I dont find any help there. I believe in my mistake too, but I cannot indentify it.Best RegardsJiri

Hi,I have two problems with PMDG 737 600/700/800/900 NG [updates 1.3 and 1.1 + model update]:1. When I am, for example on 34R at KSEA, and I set FMC for KSEA to KSFO with KMORE1 SID {AIRAC 0807}, I have basic disagree between last position of the aircraft and my present position. On ND my aircraft is sitting somewhere far from KSEA. The same problem with all models, reinstall without effect.2. I cannot engage AP A or B after TO, I still hear alarm sound two times. I press i.e. HDG select + FLCH or LNAV + VNAN, then I try to engage AP and it is not possible. I dont know why, all preflight settings are done, I never met this problem with any other aircraft [addon of course].Can anybody help me ?Thanks,Best RegardsJiri

Hi,thank you very much for new Fs2crew edition, I use most of previous versions and I like it very much. I have two questions regarding Airbus A320 edition (FS9):1. My trim for T.O. is set to 2.1, but I hear value 1.0 during checklist. Should Fs2crew read real value or not ?2. I hear all cabin announcements during the flight, except the safety instructions during taxiing. Is this correct ?Thank you very muchBest RegardsJiri

Hi,can somebody send me D-TO calculator for LD767 written by Christian Ionescu, please? I erased it accidentaly and Level D flying club website does not work.Thank you very [email protected]

Hi,thank you for your suggestions, but nothing helped. If I want to load flight plan to the VoxATC or SID STAR editor of Flight plan trainer I receive following message /English -Czech/:************** Text **************System.NotSupportedException: Uveden

Hi,personal firewall is not my problem, when I start VoxATC with original flight plan {Vox ATC tutorial] or without flight plan /for local VFR/, all works well, so I suspect VoxATC has problem with FS flight plan reading and I dont know why. I have tried unninstall FSX and install it again without SP1 today, but the problem remains. I have only 7 days to try Vox ATC and I need to test for example final vectoring for ILS which was very strange in previous versions. But I can not....please somebody help me !!!RegardsJiri

Hi,my flight plan is LKPR-LOWW, low altitude airways, FL 210, IFR, aircraft is CRJ 700. But it makes the same problem with cessna or VOR to VOR flight plan. When I run flight plan trainer and try to load my flight plan, I receive following message: The given paths format is not supported and in the details something about exception text. I did not understand. ThanksRegardsJiri

Hi,I have installed the last version 5.34 (trial) of VoxATC X and I am not able to initialize Vox ATC in case my own saved flight. If I load VoxATC tutorial flights or only local VFR, all work well, but if I try to initialize VoxATC X with my own saved flight I recieve FATAL ERROR announcement during initialization. I am not able to perform flight plan training too. But default ATC works correctly on these flights. What is the problem ? I use default FSX flight planning tool.FSX, SP1ThanksRegardsJiri