steinbach72

Hi,I have 2 questions regarding BAe 4100.1. Is pushback gauge implemented ? I did not find it.2. Where is panel state saving/loading possibilty ? And finally one small note. I miss key mapping possibility very much. For example assigning ALT a HDG knobs is very usefull for me, because when I rotate these knobs i VC, the values on PFD are too small to control values. ThanksJiri Steinbach, Prague

>Hi There>>I was wondering if there are other people who are having>problems with the combination VOCATC en FSBUILD.>>When i create a plan with FSBUILD and try to enable voxatc i>get a "Fatal error" on voxatc. Wen i create a plan with MSFS>flightplanner there is no problem.>>Strange. I there a solution?>>Thanx>>>Gilles>Ps: sorry for my poor englishHi,I had the same problem. The solution is to create FS Build plan [in XML format], then open FSX, open flight plan in flight planner and save it again {may be with the same name}. Then Vox ATC accept it.Best RegardsJiri

Hi,1. I am not able to set SID and STAR with VoxATC 5.55. I still hear: "proceed to first waypoint". I set SID/STAR, then load another VoxATC flight, then close FSX and load flight with SID and STAR. 2. In previous version I heard: "proceed direct to ..waypoint name.."Controller use still "first waypoint" now. Can anybody tell me why ? Is there any change in v. 5.55 ?????Thanks for your help. Jiri

Hi, I have problem with VoxATC X 5.55 [and 5.5]. I run indexer after installation, but when I want to fly from EDDP [Leipzig-Halle from Aerosoft], I receive taxi clearance to rwy 26 or 28, but in this airport are rwys 08 L/R and 26 L/R, When I change weather, still the same. Taxi guidance show me the strange way. The similar situation I have with Tenerife North airport from Sim Giants. I don`t know why ?When I use default ATC form FSX, I always receive correct runways at these airports.Thanks for help.Jiri Steinbach, Prague

Hi,I have installed FSX version of PMDG 747 and then FSX to FS9 update, because I still use Fs9 very often. But after updating, all radios disappeared in Fs9 {no numbers on screens}. So I uninstalled FSX version and Fs9 version subsequently, but during removing operation {via remove programs} I lost electrial power at home and uninstall operation was incomplete. If I want to install Fs9 version of PMDG 747 again now, the installer still announce me, that I have version 1.1 installed and I can not proceed. But uninstall is impossible too. Is any way, how to solve it? Where is located file, which tell setup.exe about last version? I dont want reinstall OS !!!!!Thanks Jiri

Hi,I dont know, how to set TOGA in PMDG 747 [FS2004] when flying from VC. Is there any clickable area like in 2D panel, or have I to assign TOGA to joystick or keybord ?ThanksJiri

Hi,I use VoxATC UK for FS2004 and I have following problem. When I start AI interaction (via multiplayer), FS2004 crashes after 2-5 minutes. When I run VoxATC without it, all run well. I set everything by help file. AI traffic inside FS set to zero, AI traffic inside VoxATC UK to 80%. I see aircrafts, hear communications, but FS2004 crashes, does not depend on choosen airport. When I connect AI during flight, situation is the same.Can somebody help me, please ?Best RegardsJiri

Hi,thank you very much for quick replies and suggestions. I am not novice in 737NG, I only reinstall it after about one year, I never met this problems before. 1. this flight was example only, I have the same problem in other airports. I dont understand, how it can be caused by AIRAC if coordinates disagree about many miles, it is not light shift only.Problem is, that if I enter i.e. 34R at KSEA, runway appear somewhere in the right bottom corner of ND, I need to use center option to see it, my airplane is in the center. 2. I fly this aircraft many times before, from dark and cold or from running engines, and I never had problem with AP. I look at the manuals again. of course, but I dont find any help there. I believe in my mistake too, but I cannot indentify it.Best RegardsJiri

Hi,I have two problems with PMDG 737 600/700/800/900 NG [updates 1.3 and 1.1 + model update]:1. When I am, for example on 34R at KSEA, and I set FMC for KSEA to KSFO with KMORE1 SID {AIRAC 0807}, I have basic disagree between last position of the aircraft and my present position. On ND my aircraft is sitting somewhere far from KSEA. The same problem with all models, reinstall without effect.2. I cannot engage AP A or B after TO, I still hear alarm sound two times. I press i.e. HDG select + FLCH or LNAV + VNAN, then I try to engage AP and it is not possible. I dont know why, all preflight settings are done, I never met this problem with any other aircraft [addon of course].Can anybody help me ?Thanks,Best RegardsJiri

Hi,thank you very much for new Fs2crew edition, I use most of previous versions and I like it very much. I have two questions regarding Airbus A320 edition (FS9):1. My trim for T.O. is set to 2.1, but I hear value 1.0 during checklist. Should Fs2crew read real value or not ?2. I hear all cabin announcements during the flight, except the safety instructions during taxiing. Is this correct ?Thank you very muchBest RegardsJiri

Hi,can somebody send me D-TO calculator for LD767 written by Christian Ionescu, please? I erased it accidentaly and Level D flying club website does not work.Thank you very [email protected]

Hi,thank you for your suggestions, but nothing helped. If I want to load flight plan to the VoxATC or SID STAR editor of Flight plan trainer I receive following message /English -Czech/:************** Text **************System.NotSupportedException: Uveden

Hi,personal firewall is not my problem, when I start VoxATC with original flight plan {Vox ATC tutorial] or without flight plan /for local VFR/, all works well, so I suspect VoxATC has problem with FS flight plan reading and I dont know why. I have tried unninstall FSX and install it again without SP1 today, but the problem remains. I have only 7 days to try Vox ATC and I need to test for example final vectoring for ILS which was very strange in previous versions. But I can not....please somebody help me !!!RegardsJiri

Hi,my flight plan is LKPR-LOWW, low altitude airways, FL 210, IFR, aircraft is CRJ 700. But it makes the same problem with cessna or VOR to VOR flight plan. When I run flight plan trainer and try to load my flight plan, I receive following message: The given paths format is not supported and in the details something about exception text. I did not understand. ThanksRegardsJiri

Hi,I have installed the last version 5.34 (trial) of VoxATC X and I am not able to initialize Vox ATC in case my own saved flight. If I load VoxATC tutorial flights or only local VFR, all work well, but if I try to initialize VoxATC X with my own saved flight I recieve FATAL ERROR announcement during initialization. I am not able to perform flight plan training too. But default ATC works correctly on these flights. What is the problem ? I use default FSX flight planning tool.FSX, SP1ThanksRegardsJiri

Hi Bryan,I have to admit the most of problems were caused by my insufficient update 1.3 info reading (I am sorry). But problem with different torque values after engines start still remains. I use Throttle Quadrant (CH-products) and if I fly ATR without Fs2crew, no problem, no torque asymetry. With Fs2crew the No2 has still lower torque value until I set TO power. During descent, approach and landing and I am not able to adjust throttles or set them to idle (not on the throttles, not in 2D or virtual cockpit by mouse). And one more question to you. Does exist any keystroke for throttle setting to NOTCH ? I have to switch from VC to 2D cockpit before takeoff and cannot use my Throttle Quadrant.RegardsJiri

Hi Bryan,thank you very much for your quick reply. I will check all step by step and try your tips. Will report.RegardsJiri

Hi,I have several problems with FS2crew ATR edition and need some help.1. Ground COM icon closes after permission to start in HOTEL mode.2. When I want to start No2 in HOTEL mode, prop brake is off, I must switch it on, but it should be in on position by default. 3. Which aux pump I should use during START No2 ? In ATR tutorial is written to use AUX PUMP on overhead panel (but this pump is already ON in Fs2crew), in your manual is recommended pump on pedestal?4. When I start both engines, torque on No2 is about 7, torque of No1 is higher, about 11. If I use ATR without Fs2crew, both engines shows the same torque. 5. When I activate timer before takeoff, I dont hear anything.6. After liftoff, my airplane still turns to the left strongly, I am not able to correct it. When I dont use Fs2crew, ATR fly correctly. I dont change trim settings for rudder or ailerons !!! When I switch autopilot on, all is O.K. ThanksRegardsJiri

Hi Russell,is possible to send me a picture of your global settings inside nvidia control panel ? What manufacturer made your card ? Asus or another ? [email protected]

Thank you Bryan, I will try it on Friday and will report results.Best RegardsJiri

Hi Bryan,I have another one question to you please. I train traffic pattern to test TO and futher procedures now, so I start Fs2crew without predeparture events. I begin on AT/T with runway entering procedure, but I fill predeparture briefing (because of flaps setting). All runs well, but when I am between 400-900 fts and press secondary button to command HEADING SEL, nothing happens, but it seems, that Fs2crew remember my click, because as I climb to 1000 ft, I hear my AP engage command - without second click on secondary button. But I hear "heading select" sooner, when I arm AT/T before entering the runway. What is wrong? Can you help me?Best RegardsJiri

Hi,I have the similar problem. This driver was recommended me by nvividia, but after installation I have experienced worse performance, problem with AA/AF remained the same and my CH-products (throttle, yoke and pedal) stopped work in mapped mode (which I use). So I came back to older driver - the graphic the same (terrible), but performance and CH-products are O.K. I have tried to install FSX to my computer but results are very similar. Performance is very, very good, but AA/AF problem is the same. And this is the game from Autumn 2006 !!!And one my little personal experience - the problem with AA/AF is pronounced with addon sceneries in comaprison to default sceneries, especially on airports (runwaÿs, buildings and taxiways). I hope we will find solution or any new driver will help us !!!RegardsJiri

Hi Bryan,things look better now. You were right. I did not activate pushback [using AES pushback] and engine start was fully functional.Fs2crew is simply great and clever !!!Thank you very much, departure from LOWW [Mega Airport] with Fs2crew, RC and AES together is simply fantastic.Best RegardsJiri

Hi,I have one question. Is any way, how to skip the pushback procedure (only), when I am using AES from Aerosoft, where pushback procedure is perfect ?Best RegardsJiri

Hi,I have received reply from Leadtek company, regarding my 8800 GTX problem. They recommended me to upgrade FS9 (done - of course), and the latest Direct X install. I have downloaded and install it from MS, but nothing changes. It seems to me, they are not able to solve this serious problem at this time (nor Nvividia nor Leadtek). So I can say only -" I wasted my money".RegardsJiri