jakef

Yeah, this set up made so there was commonality with the -400 classics. Plus all those options cost money. Commonality though, was the biggest reason.

N302AS:

[Displays]
Glass_PFD_ND=1
PFD_low_airspeed_alert=1
PFD_groundspeed_displayed=0
PFD_Vref_plus_20_bug=1
PFD_100knot_bug=0
PFD_rising_runway=0
PFD_split_axis_flight_director=1
PFD_pitch_limit_indicator_popup=1
PFD_radio_altitude_round_dial=0
PFD_angle_of_attack_dial=0
PFD_landing_altitude_bar=1
PFD_2500_height_alert=0
PFD_show_landing_flaps=0
PFD_integral_heading_scale=1
EFISMAP_radio_altitude_round_dial=0
EFISMAP_80knot_bug=0
EFISMAP_flight_path_vector=1
ND_trackUp=1
ND_VOR_course_lines_displayed=0
ND_VerticalSituationDisplay=1
ND_RangeArcs=0
ND_TCAS_RangeRing=0
ND_ActWptData=1
PFD_ND_NPS=1
Engines_SideBySideDisplay=0
Engines_ColorChangeInhibit_5minutes=1
Engines_ColorChangeInhibit_10minutes=0
Engines_LowOilQuantityInverseVideo=1
Engines_HighVibrationAlert=1
Engines_ShowRefN1=0
Engines_ShowOilQPercentage=0
Engines_ShowMaxContLines=0
Fuel_LowAlertBelow1000lbs=0
Fuel_TOTALDisplay=1
MFD_FlightControlSurfacesIndicator=0
MFD_BrakeTemperatureIndicator=0
[Engines]
Engines_DoubleDerate=1
[MCP]
MCPType=0
[AFS]
WingsLevelatTO=0
AllowGSCaptureBeforeLoc=0
RollOutEnabled=0
[FMS]
DefaultAccelHeight=1000
DefaultReductionAlt=1000
DefaultCutBackAlt=800
DefaultRestoreAlt=3000
DefaultTransAlt=18000
[GPWS]
GPWS_AltCallouts=1
GPWS_2500_RA=0
GPWS_2500=0
GPWS_1000=0
GPWS_500=0
GPWS_400=0
GPWS_300=0
GPWS_200=0
GPWS_100=0
GPWS_50=0
GPWS_40=0
GPWS_30=0
GPWS_20=0
GPWS_10=0
GPWS_MinimumsType=2
GPWS_AprMinimumsType=4
GPWS_WarnBankAngle=1
GPWS_TerrPeaksMode=1
GPWS_TerrUseCyan=0
GPWS_V1Callout=0
[TCAS]
TCAS_ShowAllTraffic=0
TCAS_FilterRange=40
TCAS_FilterSeparation=2800
[Airframe]
Airstair=0
ShortFieldPackage=0
FlightTestPackage=0
SteelBrakePackage=0
DualBatteryPackage=1
JumpSeat=1
Yoke CheckList L=1
Yoke CheckList R=1
ETOPS=0
DualCargoBottleSystem=0
SingleClassCabin=0
EyebrowWindows=1
SatcomAntenna=0
ISFDInstalled=0
HGSInstalled=1
HGS_AutoAIII=1
HGS_GSrefInPRI=1

Only NGs that came off the line with no eyebrow windows have the vortex generators. Ngs with eyebrow windows or eyebrow windows that were removed do not have them. I forget the exact reason, but if eyebrow windows are or were present , the vortex generators cannot be installed...something to do with the airflow. PMDG should make it so if you select eyebrow windows, the vortex generators are removed. But its not a big deal, at least for me.

PM me.

PM me i have a fix for you.

Interestingly enough in the 80's United had three of its 727-200adv equipped for overwater ops for flights over the Gulf of Mexico. They had the OMEGA system installed on them, as we ll as an early ACARS.

The 727 is by far the best looking aircraft Boeing has ever made. Haven't heard many pilots say anything bad about it either.

Might be that they need to update the livery.

It seems to appear with any livery.

It does appear that the windows have been fixed, except the windows on the L3, R3 doors (777-200LR only) are still not transparent, not a show stopper though...

Both American and Delta do have the HGS on their 737NGs.

Thanks Kyle, that's good enough for me.

You cant really see it if the sun is shining directly on it, but it is there. Not a huge deal but it defiantly wasn't there prior to the update. I'm just trying to figure out whether it was done on purpose, or is a bug. The fact that you can see it from the VC, and not outside is what makes me think it might be a bug, but not sure.

Can anyone confirm that the inner portion of the winglets is showing the night lighting splash during the daytime when looking back at them from the VC. It doesn't show from outside in spot plane view, but when in the VC they appear to be lit up as they are in darkness. This is with the newest version (build  1.10.6436). It seems to be present on all the winglet models, -700, -800, and -900.

Kyle, It was a clean install per the pinned thread. I have since, uninstalled and reinstalled, again per the pinned thread, but the error remains for me in FSX. as Ryan said it looks like you guys are working on it , and I'm sure you'll figure it out.

Kyle, The panel states issue seems to be present in FSX as well. I did a clean install with the update with a default FSX setup and used the PMDG short panel state as a starting point. The fuel, and anti ice is on all the time. I'll submit a ticket.

As long as it's not a widget.

Amen to that!!!

Actually the warning reads "Stabilizer Configuration" on the EICAS display. And I have not yet been able to reproduce it, so far it has just happened that one time...weird! The trim was set properly in the green band.

I had this problem yesterday, and the trim was set properly.

I have seen this as well, and it happens with or without weather. I can fly in FSX with the weather cleared, and fuel prediction still drops. I believe they are looking into this.

What a terrible loss, his work was outstanding and he will be missed by the community, deepest sympathies.

Hi Ryan,

 

I had a ticket open about this but didn't know an update was available yesterday until I saw this thread just now.  I had assumed there wasn't an update yet because when I opened the Ops Center it checked and didn't find any updates.  However it said I had one notification, but the notification page was blank.  I manually ran the OpsCenterUpdater program and it found the new version and downloaded it.  After the update the notification appeared (telling me to update the program I had just updated).  So at least I know future notifications will come through all right!

 

Everything is much more functional, no crashes, documentation is listed and selectable, software versions check OK, etc.  The good news is the livery downloader does not crash the Ops Center any more.  The bad news is now it reports:

 

"There was an unknown error downloading the list of liveries"

 

If I click on the OK button I get a screen telling me there are no liveries for this found for this aircraft.

 

Still, it's a huge improvement, just not quite fully functional in XP yet.

Interesting because on my machine (XP 32bit) the latest update has made the ops center fully functional. This seems to have become a real head scratcher...on all three OS's (XP, Windows7, and Windows8) we have a mixed bag of working, partially working, hummmm....weird! 

Hi Ryan,

 I run XP and the update to Version 1.5 has fixed everything for me as far as I can tell.

I have also seen this issue...

Interesting, I have yet to find a 777 flightdeck picture on the net with the inop. stickers...granted I haven't looked at every single one.

Awesome paint Christian. Thank for the ASA -900 Winglet and non-Winglet repaint. They're beautiful :wub:

 

 

 

Someone knows why these aircrafts are unable to get winglets?

Being the earliest -900s off the line, their wing was not able to support the extra wieght of the winglets.