Jas451

Still cannot figure out what I.m doing wrong. The airport I'm trying to modify is an add-on. Followed your directions, but when I reload the airport in Taxi Manager it continues to show the current airport layout in satellite view, but the red runway and green taxiways lines  for FSX stock airport APX file even after making my changes and saving the file. 

Hi, I'm trying to update the taxiway's at KMRB. When I try to set a taxiway marker on a new taxiway path as a "hold short" it makes all the makers as hold short. Not sure what I'm doing wrong. Would appreciate any help with this.

This is the latest crash report for FSX

Description
A problem caused this program to stop interacting with Windows.
Faulting Application Path:    E:\FLIGHT\steamapps\common\FSX\fsx.exe

Problem signature
Problem Event Name:    AppHangB1
Application Name:    fsx.exe
Application Version:    10.0.62615.0
Application Timestamp:    559f9a9a
Hang Signature:    350e
Hang Type:    6144
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    1033
Additional Hang Signature 1:    350ea38e67f8e2207b4e4ad89ecc415b
Additional Hang Signature 2:    eb2b
Additional Hang Signature 3:    eb2bfda6c058a2b575a450d1790752a9
Additional Hang Signature 4:    350e
Additional Hang Signature 5:    350ea38e67f8e2207b4e4ad89ecc415b
Additional Hang Signature 6:    eb2b
Additional Hang Signature 7:    eb2bfda6c058a2b575a450d1790752a9

Extra information about the problem
Bucket ID:    50
 

Which crash logs and located where?

System spec i-7-4820K @ 3.70GHz 16.0 GB memory Nvidia Geforce 1070 with newest drivers Windows 7 64Bit. Add-on are Orbx FTX Global base pack openLC North America, Vector, EU England, Ireland, Northern Ireland, Norway, Scotland, Wales, Na Cental Rockies,Northern Rockies,  Northern Cal,Southern Cal, Pacific Fjords,Southern Alaska, Pacific Northwest plus multiple airports by Orbx, Aerosoft US Cities Chicago, Las Vegas, Los Angles, and Cleveland. AIrports by Flight Beam and FS Dream Team along with multiple 3rd party aircraft. Everything was working until I installed the 747. Again not saying there is something wrong with it, but something has changed since the install. I am just at a loss as to what. 777 and 737 working fine Just the 747 giving me grief.

Didn't say there was anything wrong with the aircraft. I did read the documentation and followed all the recommendations, but still the skin of the aircraft is missing from the leading edge of the wings forward, only see the interior. Hence the question "what am I missing?" I am running Windows 7 64bit. I've been so focused on the free flight screen issue that I hadn't tried to fly the aircraft. Now when I try to fly I get an OOM when the flight loads. Forgot to add this is on a new reinstall of Windows and FSX Steam.

When I load the 747 V3 the front half of the aircraft is a skeleton. The skin is missing from the wings forward. Tried uninstalling and reinstalling no change. Running FSX Steam, System is i7-4820, 16 Gigs of memory, Geforce 1070 with latest drivers. My PMDG 777 and 737 display correctly as well as all other 3rd party aircraft. Re-down loaded the 747and reinstalled, validated my Steam install, deleted the config file so it would be rebuilt. What am I missing?

Thank you so much. Strange that it only affected FSX/FSX-SE. Must be something in their programing. Off to download v3. Thank you again.

FSX Steam single install Windows 7 64 bit

This would be the A2A Cessna 182

My Saitek Multipanel reads meters instead of feet. Anyway to correct?

Running v2.0.013 over network. No problem hearing ATIS here .I see in the weather info after clicking on the info box right side of menu and clicking the weather tab.

Thanks Dave, Will wait to see if you can get it worked out. In the mean time I have no problem just ignoring the PILOT2ATC COM active setting.  I would rather focus my attention in the cockpit anyway, at 65 I'm easily distracted. My preference is to run FSX at full screen so I can utilize my GTN 750 add on in a 2nd screen where it's easier for me to control. 

Thanks for the replay Dave,  The problem seems to vary with FSX default and add on aircraft. Some default will not allow me to switch between COM1 and 2 in PILOT2ATC,  but allow the switch in FSX.  In other cases default and add on aircraft will allow me to switch between COM 1and 2 in FSX, but when I change to COM1 in FSX  PILOT2ATC shows COM 2 as active and when I switch to COM 2  PILOT2ATC shows COM 1 active,  so if COM 2 is set to ATIS in FSX I hear the info but COM 1 is shown as active in PILOT2 ATC. I guess the solution will be for me to ignore which radio is showing active in PILOT2ATC.  Am I correct in assuming that to run PILOT2ATC on the same computer as FSX that FSX has to be run in windows mode?

To any who have a network set up. I have the program running over a net work, even have ATIS playing by running a connection from headphone jack on main computer to the line in jack on network computer. The problem I have though is with the COM radios. When I have COM 1 on in FSX COM 2 is shown as active in Pilot2ATC on the network machine. When I try to change to COM 1 in PILOT2ATC to match FSX it just stays stuck on the opposite COM channel. Any ideas?

Installed the demo per instructions, load a flight plan and connect to FSX. I get a box pop up that tells me I'm connected, but when I tune to ATIS  frequency shown I get an error message that say's I'm not tuned to a facility?

Yes, Thank you sir for the great fixes to this aircraft. It has made this plane a joy to fly.

Just download from the Multicrew Experience download page on the MCE site

Hi, I haven't updated MCE in awhile. Do I need to uninstall previous version or just install update over current version? :Confused:

Sorry, forgot to put the 7 in Windows. Changed folder to full control, problem solved. Thank you.

Hi, Installed Active Sky on my client pc running Windows 64 bit per network setup instructions. When I try to open Active Sky i get the following error" Your network database files could not be updated. Please make sure sharing is properly setup if using a network configuration." Tripple checked my setup and cannot find any error. All my other addons for FSX which run over a network work without any problem.

Not happy with JF just now. Bought this aircraft and tried to install. Got an "No order found" error when attempting to install. Out a good bit of money until they get this sorted out.  Ok, got to change my opinion of JF. Have to assume that it was some type of order verification delay. Waited two hours and reattempted an install. Installed without any difficulty. Happy camper now.  Off to see if I can get this bird in the air.

Ok, found that FSX wasn't loading my flight plan. Had to do a reinstall. Problem fixed.

Have the same problem now. After update to 6.16 no longer get response from ATC. The only response is if I do not complete a phrase then will get the "last aircraft say again" otherwise nothing. Tried setting to above normal and high, no success.

Have you contacted them through support email? Found out my problem was too many add-on aircraft. Between the aircraft installed and repaints I have over 300 aircraft config files that MCE was trying to access. Email support was able to sort out the issue, now up and running as it should, although will need to test further just to be sure no additional problems. I wish to state their support has been fantastic. Never had such good services as the folks at MCE provide.