camaroz288

Hi everybody.I have a problem with my ILS approach. (for example: ILS 25 R KLAX) All my setups seems to be good: ILS freq set on 2 nav, right path set on 2 course. Set DENY on Glide-Slope Capture Before Localizer, set ON SET FSX LOC CRS, set Autoland "Fail Op".Near from ILS (27 nM) activate & capture the LOC, then, activate approach: still OK with following path & glide slope, then activate, AP 2 (CMD B, but always about 10 nM from runway, my 737NGX start to make a strong turn & crashed down. I don't understand why he start to successful capture the LOC, then follow the path & descend correctly to the GS but always missing down, near the runway!!! Please HELP me !!

I have problem with RNAV &/or VOR approaches. I use the latest AIRAC(1107), when i go to STAR menu, i can choose RNAV (ex:VORD10 for TNCM) i put 701 in MIN PROF as it requiered the DA in chart. But i'm always too high to reach the runway.The fixs are matching to the RNAV procedure (speed & ALT). If i try on MHTG, the FMS says error on altitude &/or speed when crossing fixs. I search on many forums, but didn't find the right answer.My goal is to make VOR&RNAV approaches "like" ILS, in this case, Glideslope will be replaced by following fixs(speed&ALT) Could you please explain the right procedures & adjustments in the FMS for these RNAV approaches : for example over TNCM(VORD10) and MHTG(RNAV02)? Thank you for answer.

Thank you for answers.FS Navigator? ==> I already have this one, but use for NON-FMC planes because impossible to export in rte format bud!Tried FSBUILD: yes very good software and airacs updates, but would be perfect with an interface like FS navigator.

HI everybody!I'm looking for routes files (*.rte) to import in the FMC of my 737 PMDG.I've been searching on flightsim & avsim, but just few files availables.Can you tell me where i can find routes collection files, something like "real routes company airlines" ?Also, what is the best software to create & edit routes files?THX

OK STOP !J'ai tout désinstallé : PMDG 737 + FS2004Tout réinstallé : ça marche !!Merci à tout ceux qui ont essayé de m'aider!Mon regret sera de ne pas savoir ce qui a crée le conflit...Peut être un autre addon.Comme souvent en informatique, la solution ultime de tout désinstaller et réinstalller porte souvent ses fruits.Merci à tous.

Hi,OK STOP!Have uninstalled ALL: PMDG 737 + FS2004Reinstall ALL...IT WORKS!Probably conflict with another addon.So stop search and thank you for try to help me.My regret is to not know what was the conflict.

Bonjour, je tiens tout d'abord à vous remercier de m'aider à régler mon problème.La config sur ma capture overhead est à l'arrêt, moteurs allumés, freins de parc activés. A noter que la seule façon pour moi d'avoir les moteurs allumés est de démarrer avec le cessna 172 avec moteurs et instruments activés, puis de choisir le PMDG 737.Quand je suis pas à pas le tutorial de jean-michel Mabille je démarre les HYDRAULIC PUMPS avec les ELECTRICAL HYDRAULIC PUMPS sur OFF. tout se déroule normalement jusqu'au check fire procedures, impossible d'aller plus loin à cause des instruments inactifs. En outre, je n'arrive pas à démarrer les moteurs, j'entends qu'ils essaient mais sans y parvenir, donc dans ce cas présent, impossible d'avoir une alimentation via les générateurs.Impossible de dérouler ici sur le forum toutes les checklists et procédures, le mieux serait de m'indiquer un site ou une adresse, ou je puisse récupérer une procédure cold & dark complète avec captures et explications si possible.

Hi,First i want to thank you to help me try to solve my problem.I don't have any other PMDG products installed.Have already checked failures on pmdg and cleared all., also checked failures in FS9 menu.I didn't modify the FS9.CFG and let the pmdg install did his routine install defaults. I open my fs9.cfg and didn't saw PMDG entries.Maybe you could send me your fonctionnal fs9.cfg with pmdg entries enlighted for compare to mine.Have already tried to uninstall & reintall the pmdg 737, with admin rights.The tutorial i followed from the beginning is the jean-michel mabille tutorial procedures pmdg 737.Started from the cold & dark flight default delivered by PMDG.Follow all procedures but unable to start the engines , checking fire procedures impossible because of unfontionnal panel.The only way for me to have engines ON, is to start from 172 with all engine & instruments on , then choose the 737 PMDG.Have tried your 3 procedures:Light Ground power is present; my brakes are on, started the APU, & start generators, the switch generators return to central position after i press them, then unable to start engines, i hear the sound but they don't start.By the way, we couldn't check all the procedures from cold & dark here on this forum.I think the better way is to give me a website or adress where i can get your exhaustive procedures from cold & dark , with screenshots explanations if possible.Thank you.

J'ai suivi point par point le tutorial de jean michel Mabille, mais sans résultat

Je le répète:Mon installation est une installation originale et conforme de PMDG achetée et téléchargée sur le site officiel.Mais pour être précis: oui les fichiers .gau sont présents.

The jean michel mabille tutorial is exactly the one that i followed from the beginning!My generators switch remove to central position afetr turned on. I expect we talk about the same switch.To ensure this, can you post me a capture with these switch enlighted.By the way the precedent overhead send by WhiteKnight77 is in the same config as mine.

My switchs positions are the same of yours.My flight default is 172 engine running & all avionics activate.I don't know what to try next :still blank

Les sons ? oui je les ai,Quand à cliquer sur tous les boutons, je n'ai pas suivi la méthode de la découverte mais le tutoriel de jean-michel Mabille.Sans succès

I think the better solution is that you post a capture of YOUR overhead panel with all switch in the right position.Maybe my tutorials are wrong.

Yes already tried changing resolution and also switch full screen to windowed & vice - versa...My native resolution is 1920 X 1200, tried 1024x768 - 1600x1200.==> STILL BLANK