EK433B77W

G'day all,Having a little bit of a problem compiling some flight plans I made.I'm getting the following Error:" ERROR in file C:\Line 6 (error location shown in red) :AC#380,A6-A parameter is missing, expecting the AI percent here."Just wondering if anyone could please explain to me why this error is occurring.I've tried compiling other FPs and they've worked fine.Cheers,EK433B77W!

/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Departure Runway: 30L/R @ DXB - RIKET 2D DEPArrival Runway: 01L/R @ BKK - BENTO.GIPSY 1B ARR/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Route:OMDB RIKE2D LALDO IMLOT KANAS DIVAB EGPIC EGRON JI LATEM TELEM VASLA AAE AMVIG BODAR MONPI DULAR UPTAR NNP IKOSI OPASA BBS BUBKO SAGOD PTN BETNO.GIPS1B VTBS/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Departure Runway: 01L/R @ BKK - CHEST 1B DEPArrival Runway: 34L @ SYD - RIVET 9 ARR/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Route:VTBS CHES1B.RYN ANOBO BENSA XONAN SAMOG IGARI IKUMI ENREP NOPAT DAMOG SUSAR MUMSO ELGOR LEBIN BOBOB ESPIT NIMIX ARUPA PNK OSUKA IKAPI HOSTY NQ KETUT ONOXA NIKOM JATAR DOPUK DEENO AS KALUG POLEV APOMA MACLA VIMAB PKS MAKKA TARAL RIVET9 YSSY/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Departure Runway: 34L @ SYD - SYDNEY 3 DEPArrival Runway: 02 @ CHC - VANDA 3A ARR/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Route:YSSY CAWLY PLUGA SULON VAND3A NZCH/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Departure Runway: 02 @ CHC - Visual DEPArrival Runway: 34L @ SYD - MARLN 8 ARR/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Route:NZCH VANDA SULON PLUGA SHARK MARLN WHALE PRAWN MANFA JAKLN YSSY/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Departure Runway: 34L @ SYD - KAT 1B DEPArrival Runway: 01L/R @ BKK - CABIN 1B ARR/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/--/-/-/Route:YSSY KAT1 BTH NYN KARAG NONET VINAX DOTAP MILIV TN NOVEM MAVER DN NATAL SHEPP ELBIS PORAK LADOP MAMOK BRU DOGOG ASISU TODAM LAGOT AKMON MOXON DAGAG ELSAS LOSON TSN CUCHI SAPEN POPET PHN BOKAK GOMES GOMES.CABI1B VTBS/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Departure Runway: 01L/R @ BKK - JEANS 1C DEPArrival Runway: 30L/R @ DXB - BUBIN 3T ARR/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/Route:VTBS JEAN1C.TANEK DWI SADUS RINDA MABUR URKOK DOGEM VVZ MEPOK BUSBO ASOGA AAU AKTIV BOMBA NOBAT LADOT RASKI VAXIM RAGMA VUSET PASOV KUPMA BUBI3T OMDBI have many other combinations for UAE418/419. The ones listed above are probably the most popular (due to weather).If you haven't already, copy these into FSBuild to create the .pln file.All data was extracted from Real Flight Plans and is only for use in Flight Simulator only, as from extraction date these flight plans might now be defunct.Happy Landings,Cheers,EK433B77W!

G'day all, I've just begun using the Simmers Sky Boeing B777-200LR. I've had the aircraft on my system for some time but never really flew her properly. One thing I have noticed compared to the B77W is the difference in engine power. Now, both aircraft are fitted with GE90s but the B77W is a GE90-115BL1 (115,540 lbs of thrust) and the B77L is a GE90-110B1L (110,760 lbs of thrust). When I was executing my approach I noticed to keep the B77L at landing speed I required almost 70% N1, with the B77W it would be more around 40%. Not to mention it almost took the full length on Dubai's RWY 30L to stop her with A.B 2. So, there's also an issue with the Reverse Thrust side of things as well. So I did a little more digging and found that the B77L would produce 105.90% N1 whereas the B77W on the other hand would produce 115.90% N1. (Note this is simulator data not real-world). Data was found by just pushing the throttles on my quadrant to the full position and waiting for the N1 to stabilize. I also checked the aircrafts parameters in the aircraft.cfg to see if the engines had been de-rated in the config but both the B77L and the B77W have identical engine data and Turbine Information fields. So I'm out of ideas on how to fix this issue. If anyone could please assist me in resolving this problem is would be much appreciated. Thanks in advanced, Cheers, EK433B77W!

G'day Jim, Followed your recommendations, and hey presto. It worked! :) Just a quick question, do you know how to remove the lights as stated by 'Arnaud'? As I'm not a fan of the lights either...Thanks guys for your help, I would have never been able to figure it out otherwise.Cheers,EK433B77W.

Arnaud,Still no luck. I've gone through the ReadMe.pdf to see if there was any additional files or textures that needed to be added via download in order for the tree textures to appear but there's nothing mentioned regarding 'trees' in the ReadMe. I also did a little looking in the Texture folder of the scenery, there's no file that indicates anything to do with 'trees', which I find really weird... I've re-installed the scenery twice and still get the same issue...?Cheers,EK433B77W.

G'day Arnaud,I did a quick count of the files in both the Texture and Scenery folder and I have 156 .bmp and 115 .bgl. Cheers,EK433B77W.

Hello all, I’ve just recently installed ISD’s Rome Fiumicino International Airport (FCO/LIRF) for FS2004 and I have the following problem. When I loaded the scenery for the first time I noticed large amounts of weird ‘shapes’ with no textures on the perimeter of the airport (See attached Image). To add to the confusion, I also have the same issue with MXP (But no-where near the same scale as FCO). I’ve updated both airport’s AFCADs to the latest ones I can find on AVSIM.com and the issue still persists. If anyone could please point me in the right direction for removing these ‘shapes’ it would be much appreciated. Thanks in advance, EK433B77W.

G'day Scott,Thanks for your comment, I followed your instructions listed above and this is what I came out with (See attached image). As you can see the Missed Approach pattern is not quite the same as depicted on the APP Plate, so could you please guide me through the process of ensureing that it is? I've also attached the XML. Thanks again for your assistance mate, it’s been much appreciated. Cheers,EK433B77W.

Hello John,Yes I have indeed read through the approach section of the Manual countless times, along with that of other sections of the manual, not to mention countless threads on ‘FSDeveloper.com’. Furthermore, neither the manual nor the threads explain EXACTLY how to do it (add an APP). Coming from an armatures point of view, it's all just a big bunch of definitions at the moment. Moreover, I've attached some images of my progress so far, Yes, I know it's not much but the process of not knowing what to do next is killing me. I've also attached the Jeppesen RWY 30 L & R chart for Dubai (DXB(OMDB)). Cheers, EK433B77W.

Hello all,I've just spent a little time over at the 'FSDeveloper.com' forums trying to work my way through making some RNAV STARs for DXB in accordance to the latest 2011 charts. After reading the topic over and over again I'm still having trouble enabling the approaches. The best I can do is add the Terminal Waypoints for the approach according to the 2011 Jeppesen Charts. If someone could please inform me via a 'Step by Step' method of how to allow these approaches to be flown in FS2004 would be much appreciated. I have spent countless hours searching and playing around on ADE9x and getting as far as adding the waypoints. Thanks in advance, EK433B77W.

Hi all,Just wondering if anyone could offer me some assistance in regards to changing AI Lighting from the default 'Yellow' to a more realistic 'White'? Thank in advance,EK433B77W!

G'day Jim,Thanks for that mate.. I've just spotted another issue. When I'm at an airport with low vis, the water textures that I have installed go straight back to the default textures. However if I close ASE and go back to that airport the textures of the water are back the same...I'm using ASE and Ultimate Water FX.Cheers,EK433B77W.

Hi all, My first post on the Avsim Forums.I'm hoping someone could shed some light on 'Best Settings For ASE FS9'. Cheers,EK433B77W.