cirurgiao

I'd like to thank both of you for your interest. De-activated all my axes controls in FSX (CH Products + Saitek). In FSUIPC I assigned my CH w/6 as 4 throttles + prop + mix. Joystick calibration to create the reverse and it seems to work

Tks again and sorry for delayed answer. Was on a 24hr duty. Really it seems to work fine and I'll try the reverse which at least on the ground seemed to work too.

First I'd like to thank you both (Dan & Ivan) for your interest Sorry about this delayed answer (afpc for 1 day) I think that it seems ok now. I de-activated all CH Products 6 "throttles" controls inside FSX, reconfiguring them via FSUIPC. De-activated Saitek X52 throttle control. It worked in my 1st try with PMDG 777-200LRX so I decided to make a +2700nm flight and see what happens. T/O and after 2hr saved it. Just now I run FSX, loaded this saved flight (which is in A/P & A/T). Hope that everything works now but I confess being "afraid" of trying it in a new "free flight", which I'll need to test anyway. About my request in this topic: it seems to be working fine but since I uninstalled PMDGs doesn't it should ask for my key and later my "go ahead" RUN when running it for the first time after re-installation, or is this that "little" surprise that Microsoft reserves for all its users (things that came in the pc stays there)? Of course this is a theoretical question.

1) they work fine (I tested with B350/B737/B747 defaults and they were okay) 2) I didn't use FSUIPC calibration because there was conflict among my throttles (opening or closing throttle would make spoiler work even they were "running" in diferent products) 2-1) so just cleared all my assignments/joystick calibration via FSUIPC, de-activated Saitek X52 Throttle, kept all my controls in FSX. So, tks for your quick answer

I bought PMDGs 777-200LRX + 777-300ER extension pack + 737-8900NGX, installed them in my FSX running in a win7 64. They worked beautifully. I have CHProducts Throttles (4 Throttles + Mix + Prop) + Saitek X52 (Throttle deactivated). Never have any trouble before. Upgraded to Win10 (after Reading PMD's recommendation). Don't know if there was trouble in my first use of 777 running in a win10 machine. But things got "messy". 1) downgraded to win7 (it didn't help with PMDG) 2) uninstalled PMDG, cleaned DLL.XML in C:/Users/.../Roaming/Microsoft/FSX 3) upgraded to win10 and re-installed PMDG. 4-1) there wasn't any request for serial number (is it correct?) and didn't ask for my permition to RUN on the initial window, when we load acft for the 1st time (is it correct?) 4-2) all my settings in PMDG options where there as if I have never de-installed them 5) Since all my controls (CH Products+Saitek X52+Saitek Combat Rudder Pedals) work fine with default acft (mono/bimotor/dual & quadri jets) I just don't know why this is happening. My question: Should I do a "clean" reinstall (as if PMDG were never installed in my FSX)? If so how do I proceed? Tks in advance and sorry about this lenghty topic but I needed to write it.

My FSX was running in win7 64 when I installed PMDG 777-200LRX + 777-300ER + 737-8900NGX and everything worked. Then I upgraded to win10 64. I think that in my 1st use of 777-200LRX I just couldn`t make the left engine worked even starting following the sequence. I thought maybe it could be an issue with win10 (even that PMDG recommends it). Uninstalled win10 (!!!) but had the same trouble. Uninstalled ALL PMDGs, cleared the DLL.XML of them (.../Users/.../FSX). Upgraded to win10 (don't see why I shouldn't do it), reinstalled all PMDGs, checked that they went to DLL.XML. My 1st run of FSX in win10 I chose 777-200LRX and there was something strange. 1) my keyboards where the same (as if I hadn't uninstalled it) 2) it wasn't necessary to give permission to RUN it (when we 1st install any acft with its all gauges) 3) it didn't ask for my key I tried to run it and it just appeared to be ok but... My throttles & spoilers don't work. Either by using just FS controls axes or removing them from FSX to make direct calibration after axis assignment via FSUIPC. It seems that both throttles stay in reverse position (there is a view of both turbines opened). It would help if I uninstalled PMDGs (again)? How to make a "1st" install, the one that needs to confirm my key and the RUN in the 1st appearance of the acft? Tks

Tks Kyle I can't imagine if a thing like that (SAT) could be brought in simulation, but wouldn't it be great? Wow.

Yep I saw that SAT was greyed out but thought that maybe it was just a case of configuration. 1) COMM panel in MFD doesn't work too? 2) radio lights being amber instead of green? And tks for your help.

I planned a MDPC->PANC flight. Did everything accordingly and everything went ok. But.. SAT isn't working in LSK2L. VHF L in 122.800 with MIC light on VHF C as DATA. Radios lights are all yellow not green. What I'm doing wrong? Tks

Tks, guys. It was a newbie "mistake". I chose digital clock in the PMDG SETUP. Just a few clicks (PMDG Setup / Aircraft / Equipment / Pg 4/13) and it was there. Like I wrote above this PMDG 777 is absolutely terrific. And reading FCOMv2 (with so many pages) is a MUST. BTW these manuals can be bought?

Hello I bought both 777-200 plus 777-300 EP. Learning how to fly and using FMC. Everything works just as well but: There is no chronometer in either side of panel. The installation went well, no trouble at all. Am I missing something? Tks

Tks for a very very quick answer.I really don't want to uninstall Acceleration but I thought that to have a payware (Reality XP) that doesn't work because of it...To go to specifics:I installed it in FSX default Baron and the gauge became "blurry" and it doesn'r work. I didn't try to install it in another planeMy equip: Win7-SP1 (I7-2600 + 16GB RAM + Gainward GTX260)And tks again for your help

I installed FSX (with its activation key) then Acceleration Pack (with its own activation key). Everything works fine but...When I installed a payware (Wx-Radar - RealityXP) it really doesn't work; there is even a warning during installation that SP1 is needed.I know that Acceleration Pack and SP1 can't work and since I really don't think that Acceleration Pack is a MUST for me I went to Add/Remove Programs and to my surprise there was only a Microsoft Flight Simulator X: Acceleration.I thought that there should be the following:Microsoft Flight Simulator XMicrosoft Flight Simulator X Accelerationso I could uninstall the Acceleration Pack and still keep FSX.Questions:1) is there a way to uninstall Acceleration Pack and mantain FSX?2) or when uninstalling Microsoft Flight Simulator X: Acceleration ALL FSX will be removed?Tks and sorry if this issue was already answered in another topic