valky21

hello thank you.I will contact openckoptitsinforms what happens if there is solution

hola.I run everything with administrator rights.I have been switching to other USB ports on the "MCP" and now appears device = 17 I changed SIOC and as you see in the catches now puts connected to port 8090. not previously connected.But nothing happens.when I run the file controlador.exe out what the error code 1275 and continued in start and then I get what the catch.I have a gigabyte motherboard ga-M720-US3 with 8 USB 2.0 ports, but as you see in capturing the MCP only supports ver 1. there may be the problem. I have the MCP connected to the power adapter sold me opencokpits.Maybe my "MCP" this evil only 9 months.http://www.photoshop...8e?wf=slideshowtahnk you

HelloToday I can not look I'm not home. morning when I get the look.Yesterday when I did, after the error code = 1275 continue.Di and I went to start another error. bring it tomorrow.Thank you.

HELLOIF I GIVE IN C: Program Files (x86) IOCards SIOC CONTROLADOR.EXEI get this:Unable to start the IO.SYS service. Error code=1275thank you

The USB port. For some users it has been important to use a 'main' USB port. That is a USB port connected to the motherboard of your computer, not one connected to a hub. It's also important that your MCP has it's own seperate 5v power supply. I don't remember us asking you about that, apologies if we have. Hi Thanks.THE USB PORT IS CONNECTED TO A USB OF THE BOARD, I HAVE TESTED IN VARIOUSThe mcp is also connected to POWER BEYOND THE USB PORT.HE TRIED IN DIFFERENT USB PORTS AND ALWAYS APPEARS DEVICE = 8MASTER IS MY LINE master = 0,5,1,8 IF ANOTHER CHANGE THE VALUE THE 8 mcp NOT WORK.

hello.I changed the "MCP" to another usb and still the same.if change in sioc.ini[MASTERS]MASTER = 0,5,1,8If I change the other values ​​on 8 nothing works,Where you put the usb port and see where it is?Thank you.

Hello again.Then I changed the value 100 for 1000 and nothing remains the same.As your file sioc.ini? When I start the "SIOC. Exe" reads:"IOCards module" running"FSUIPC module" ok ver.4.8 simulator fsx8092 clients connecteds port 0disable port 8099 statusdisable port 8090 statusIt should not connect any port?Sorry for any inconvenience I'm causingI put the file fsuipc.log********* FSUIPC4, Version 4.80 by Pete Dowson *********User Name=User Addr=FSUIPC4 Key is providedWIDEFS7 not user registered, or expiredRunning inside FSX on Windows 7Module base=61000000 63 System time = 09/03/2012 16:35:38 63 FLT path = "C:UserseDocumentsArchivos de Flight Simulator X" 94 Trying to connect to SimConnect Acc/SP2 Oct07 ... 141 FS path = "C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator X" 484 LogOptions=C0000000 00000001 484 Wind smoothing fix is fully installed 484 G3D.DLL fix attempt installed ok 484 SimConnect_Open succeeded: waiting to check version okay 484 Trying to use SimConnect Acc/SP2 Oct07 4462 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0) 4462 Initialising SimConnect data requests now 4462 FSUIPC Menu entry added 4493 C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XFLIGHTSOTHERFLTSIM.FLT 4493 C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XSimObjectsAirplanesAircreation_582SLAircreation_582SL.AIR 51200 C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XSimObjectsAirplanesPMDG 737-800NGX WLB737-800WL.AIR 107734 Aircraft="Boeing 737-8ASNGX Ryanair Winglets" 107734 System time = 09/03/2012 16:37:26, Simulator time = 13:04:56 (12:04Z) 109310 Starting everything now ... 109404 AES Link established 113226 Advanced Weather Interface Enabled 138997 FS Control Sent: Ctrl=70022, Param=16384 139059 FS Control Sent: Ctrl=70022, Param=16384 139184 FS Control Sent: Ctrl=70022, Param=16384 139621 FS Control Sent: Ctrl=70022, Param=16384 139746 FS Control Sent: Ctrl=70022, Param=16384 140370 FS Control Sent: Ctrl=70022, Param=16384 140432 FS Control Sent: Ctrl=70022, Param=16384 140495 FS Control Sent: Ctrl=70022, Param=16384 140573 FS Control Sent: Ctrl=70022, Param=16384 140619 FS Control Sent: Ctrl=70022, Param=16384 140697 FS Control Sent: Ctrl=70022, Param=16384 140822 FS Control Sent: Ctrl=70022, Param=16384 140978 FS Control Sent: Ctrl=70022, Param=8192 141056 FS Control Sent: Ctrl=70022, Param=8192 141119 FS Control Sent: Ctrl=70022, Param=8192 141181 FS Control Sent: Ctrl=70022, Param=8192 141243 FS Control Sent: Ctrl=70022, Param=8192 141321 FS Control Sent: Ctrl=70022, Param=8192 141399 FS Control Sent: Ctrl=70022, Param=8192 141462 FS Control Sent: Ctrl=70022, Param=8192 141524 FS Control Sent: Ctrl=70022, Param=8192 141992 FS Control Sent: Ctrl=70022, Param=16384 142070 FS Control Sent: Ctrl=70022, Param=16384 142133 FS Control Sent: Ctrl=70022, Param=16384 142211 FS Control Sent: Ctrl=70022, Param=16384 142273 FS Control Sent: Ctrl=70022, Param=16384 142367 FS Control Sent: Ctrl=70022, Param=16384 142850 FS Control Sent: Ctrl=70022, Param=16384 143178 FS Control Sent: Ctrl=70022, Param=16384 143661 FS Control Sent: Ctrl=70022, Param=16384 145455 FS Control Sent: Ctrl=70032, Param=16384 145533 FS Control Sent: Ctrl=70032, Param=16384 145596 FS Control Sent: Ctrl=70032, Param=16384 145721 FS Control Sent: Ctrl=70032, Param=16384 145861 FS Control Sent: Ctrl=70032, Param=8192 145923 FS Control Sent: Ctrl=70032, Param=8192 146001 FS Control Sent: Ctrl=70032, Param=8192 146079 FS Control Sent: Ctrl=70032, Param=8192 146329 FS Control Sent: Ctrl=70032, Param=16384 146469 FS Control Sent: Ctrl=70032, Param=16384 146610 FS Control Sent: Ctrl=70032, Param=16384 146937 FS Control Sent: Ctrl=70032, Param=16384 147031 FS Control Sent: Ctrl=70032, Param=16384 147078 FS Control Sent: Ctrl=70032, Param=16384 147156 FS Control Sent: Ctrl=70032, Param=16384 147296 FS Control Sent: Ctrl=70032, Param=16384 147795 FS Control Sent: Ctrl=70032, Param=16384 147842 FS Control Sent: Ctrl=70032, Param=16384 149309 FS Control Sent: Ctrl=70012, Param=536870912 149324 FS Control Sent: Ctrl=70012, Param=131072 149730 FS Control Sent: Ctrl=70012, Param=536870912 149730 FS Control Sent: Ctrl=70012, Param=131072 150135 FS Control Sent: Ctrl=70012, Param=536870912 150135 FS Control Sent: Ctrl=70012, Param=131072 150416 FS Control Sent: Ctrl=70012, Param=536870912 150416 FS Control Sent: Ctrl=70012, Param=131072 151727 FS Control Sent: Ctrl=70010, Param=536870912 151727 FS Control Sent: Ctrl=70010, Param=131072 152569 FS Control Sent: Ctrl=70010, Param=536870912 152585 FS Control Sent: Ctrl=70010, Param=131072 152975 FS Control Sent: Ctrl=70010, Param=536870912 152975 FS Control Sent: Ctrl=70010, Param=131072 154020 FS Control Sent: Ctrl=70010, Param=536870912 154020 FS Control Sent: Ctrl=70010, Param=131072 169854 Sim stopped: average frame rate for last 65 secs = 49.7 fps 177311 System time = 09/03/2012 16:38:35, Simulator time = 13:06:06 (12:06Z) 177311 *** FSUIPC log file being closedAverage frame rate for running time of 65 secs = 49.7 fpsG3D fix: Passes 9491, Null pointers 0, Bad pointers 0, Separate instances 0Memory managed: 44 Allocs, 44 Freed********* FSUIPC Log file closed ***********thank you

AH SORRY.********* FSUIPC4, Version 4.80 by Pete Dowson *********User Name="User Addr=""FSUIPC4 Key is providedWIDEFS7 not user registered, or expiredRunning inside FSX on Windows 7Module base=61000000 109 System time = 09/03/2012 13:19:29 109 FLT path = "C:UserseDocumentsArchivos de Flight Simulator X" 141 Trying to connect to SimConnect Acc/SP2 Oct07 ... 187 FS path = "C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator X" 531 LogOptions=C0000000 00000001 531 Wind smoothing fix is fully installed 531 G3D.DLL fix attempt installed ok 531 SimConnect_Open succeeded: waiting to check version okay 531 Trying to use SimConnect Acc/SP2 Oct07 4337 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0) 4337 Initialising SimConnect data requests now 4337 FSUIPC Menu entry added 4384 C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XFLIGHTSOTHERFLTSIM.FLT 4384 C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XSimObjectsAirplanesAircreation_582SLAircreation_582SL.AIR 45194 C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XSimObjectsAirplanesPMDG 737-800NGX WLB737-800WL.AIR 94506 System time = 09/03/2012 13:21:03, Simulator time = 13:23:55 (12:23Z) 94521 Aircraft="Boeing 737-8ASNGX Ryanair Winglets" 97782 Starting everything now ... 97844 AES Link established 101245 Advanced Weather Interface Enabled 130464 FS Control Sent: Ctrl=70013, Param=536870912 130464 FS Control Sent: Ctrl=70013, Param=131072 132336 FS Control Sent: Ctrl=70013, Param=536870912 132336 FS Control Sent: Ctrl=70013, Param=131072 134145 FS Control Sent: Ctrl=70033, Param=16384 134426 FS Control Sent: Ctrl=70033, Param=16384 135393 FS Control Sent: Ctrl=70033, Param=8192 135955 FS Control Sent: Ctrl=70033, Param=8192 136641 FS Control Sent: Ctrl=70033, Param=8192 137203 FS Control Sent: Ctrl=70033, Param=8192 137952 FS Control Sent: Ctrl=70033, Param=16384 138701 FS Control Sent: Ctrl=70033, Param=16384 141930 FS Control Sent: Ctrl=70013, Param=536870912 141930 FS Control Sent: Ctrl=70013, Param=131072 142554 FS Control Sent: Ctrl=70013, Param=536870912 142554 FS Control Sent: Ctrl=70013, Param=131072 143100 FS Control Sent: Ctrl=70013, Param=536870912 143100 FS Control Sent: Ctrl=70013, Param=131072 147811 Sim stopped: average frame rate for last 55 secs = 49.0 fps 154987 System time = 09/03/2012 13:22:04, Simulator time = 13:24:55 (12:24Z) 154987 *** FSUIPC log file being closedAverage frame rate for running time of 55 secs = 49.0 fpsG3D fix: Passes 12491, Null pointers 0, Bad pointers 0, Separate instances 0Memory managed: 39 Allocs, 39 Freed********* FSUIPC Log file closed ***********

hello.Please confirm you have just started the flightsim and then closed it again within 2 minutes (as this is what the log shows)If I closed but touching the buttons.Repeat the sequence from above and when you have started sioc after having loaded the ngx just press the n1 switch and turn the v/s dial up two notches and down two notches.Close fsx and sent or copy/paste the fsuipc4.log********* LUA: "NGXMCP_PP_202" Log [from FSUIPC version 4.80] ********* 88313 System time = 09/03/2012 11:09:39, Simulator time = 12:23:33 (11:23Z) 88313 LUA: beginning "C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XModulesNGXMCP_PP_202.lua" 175158 LUA: ended "C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XModulesNGXMCP_PP_202.lua" 175158 System time = 09/03/2012 11:11:06, Simulator time = 12:25:03 (11:25Z)********* LUA execution terminated: Log Closed *********tahnk you

HELLO.Is there a section[Luafiles] in your fsuipc.ini? ................YES ////////// And if so (it should be there) is there an entry withXX=NGXMCP_202_PP-202 ?[LuaFiles]1=NGXMCP_PP_202NGXMCP_PP_202.log please sent this file or copy paste it in your reply********* LUA: "NGXMCP_PP_202" Log [from FSUIPC version 4.80] ********* 104209 System time = 08/03/2012 22:11:52, Simulator time = 13:41:35 (12:41Z) 104209 LUA: beginning "C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XModulesNGXMCP_PP_202.lua" 251099 LUA: ended "C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XModulesNGXMCP_PP_202.lua" 251099 System time = 08/03/2012 22:14:19, Simulator time = 13:43:51 (12:43Z)********* LUA execution terminated: Log Closed ********* THANK YOU

Hey.I followed every step and nothing, nothing happens.the steps that follow are:I downloaded the files "ngxmcpefis_pp_202" The latest file is dated 6 March 2012I copied "NGXMCP_PP_202.ssi" to "C: Program Files (x86) IOCards SIOC NGXMCP_PP_202.ssi where is the file" sioc.exe "I copied "NGXMCP_PP_202.lua" to "C: Program Files (x86) Microsoft Games Microsoft Flight Simulator X Modules I edited the "fsuipc4.ini" and I have[Auto]1=lua NGXMCP_PP_202 no spaces[General]History =TCASid = ModelTCASrange = 40AxisCalibration = NoDirectAxesToCalibs = NoShowMultilineWindow = Yes...... etc ................I copied the file "sioc.ini" to "C: Program Files (x86) IOCards SIOC I edited the file being:[sIOC]IOCP_port = 8092IOCP_timeout = 4000Minimized = Notoggle_delay = 20CONFIG_FILE = C: Program Files (x86) IOCards SIOC NGXMCP_PP_202.ssi[iOCARDS MODULE]IOCard_disable = NoIOCard_LPT = 0[MASTERS]MASTER = 0,5,1,8[FSUIPC]FSUipcdisable = NoFSUipcRefresh = 60[iOCP CLIENTS]IOCPini_delay = 3000IOCPclient0_disable = YesIOCPclient0_host = localhostIOCPclient0_port = 8099IOCPclient1_disable = YesIOCPclient1_host = localhostIOCPclient1_port = 8090[sOUND]Sound_disable = yesVolume = 100Now I start the fsx put the NGX platformI start C: Program Files (x86) IOCards SIOC sioc.exedigits are set to zero and do not movethanks

Hey thanks again.The "FSUIPC 4.8" is registered as see in the capture. http://www.photoshop...8e?wf=slideshowI confirm that in the digits is 8.as you will see in the pictures the "MCP" has zeros and even move the reels do not move, but if the NGX.For example if I click the button "HDG SEL" in the "MCP" does not light but if the NGX.THE "MCP" I never worked if I boot directly sioc.exe.Example to start the "ifly737" ssetup.exe first selected. fsimulator+ifly IOCP_ifly after the IOCP_IF737.exe. So if it works.To work with the "leved767" run "lekseecon.exe" This starts the sioc.exe and it works. But if I boot directly sioc.exe notSorry for the inconveniencethanks

thanks again.on this link there are photos of the "MCP" v2 http://www.photoshop...8e?wf=slideshowAt the moment I can not update the FSUIPC 4.8.If not with the 4.8 does not work?There is someone that works with 4.7?,y Mcp is the MCP 737NG v2http://www.opencockpits.com/catalog/mcp-737ng-v2-p-110.htmlhttp://www.opencockp...10.html?image=0Thank you.

Hey. thanks for answering.I did the tests indicate.Restart your PCstart SIOC.On the sioc window push the button SIOC monitorAnother window comes up where you should be able to select the MCPDoubleclick on the MCP lineAnother window comes up with on top the number for the MCP Switches and dials and on the bottom the number for the MCP lightyou should test the following1. Push switches and turn dials and notice that the corresponding number in the top window also respond.2. Push numbers in the bottom window and check to see that the corresponding light on the MCP comes onEverything went fine, but displays the zeros do not move.This is a snapshot of the three screens.http://www.photoshop.com/users/alz383/albums/3a2a887c999a4ffbb2ab0e59fcb2478ethanks for helping

Hello and thanks for answering.The switches do work if they also dials move is seen as moving the numbers in the "PMDG"But not in the "MCP"The image of sioc.ini this on this link http://www.photoshop...63adcee6a79b74e and paste is not here. If such assets "V / S" in the MCP, in the NGX is the green light but in the MCP not. the switch and activates the display "vert. Speed" and if you move the wheel change the values ​​in the NGX.but in the MCP can not see anything, only displais "course" "ias / mach" "heading" "altitude" and "course f/o " on but zero and do not moveIf I activate the "cmd a" light is on in NGX but the "MCP" noMy English is very poor sorry

helloIf I start the "sioc.ini" the MCP acts directly on the PMDG plane, but the numbers are display all zeros.If I boot the "ssetup.exe" and select "fsimulator x using FSUIPC" in this case everything works the "MCP" but does not act on the PMDG. In this case not start the "sioc.ini" CONFIG_FILE=C:Program Files (x86)IOCardsSIOCNGXMCP_PP_2.02.ssistart CONFIG_FILE=C: Program Files (x86) IOCards SIOC ssetup.ssi.please help thanks

Hey. Not if you see the catch here.http://www.photoshop.com/users/alz383/assets/81b22f0a16bb4688a63adcee6a79b74e

I'm sorry but will not let me paste the capture

Hello and thanks for answering.I had version 3.7 and I have changed by 4.01.Now the displays the MCP are all zero and do not move, even if the PMDGthe Sioc:.ini:; This sioc.ini was generated by ocm_configurator (version 2.1); No MCP737, EFIS737, ATC737, COMM737 or FMC747 modules were detected...; If you are sure you have modules plugged in,; you can update this sioc.ini yourself.; Consult the OCM Manual in the lekseecon folder;[sIOC]IOCP_port=8092IOCP_timeout=4000Minimized=Yestoggle_delay=20CONFIG_FILE=C:Program Files (x86)IOCardsSIOCNGXMCP_PP_2.02.ssi[iOCARDS MODULE]IOCard_disable=NoIOCard_LPT=No[MASTERS]MASTER=0,5,1,8;[uSBKEYS];USBKeys=4,1004[FSUIPC MODULE]FSUipcdisable=NoFSUipcRefresh=50[iOCP CLIENTS MODULES]IOCPini_delay=3000IOCPclient0_disable=NoIOCPclient0_host=localhostIOCPclient0_port=8099IOCPclient1_disable=YesIOCPclient1_host=localhostIOCPclient1_port=8090[sOUND MODULE]Sound_disable=YesVolume=100gracias

hola. My English is translated by google.I downloaded the file NGXMCP_202.zip and followed the steps for instalaccion of the files that come in the NGXMCP_install_202_txt.pdf, but the MCP does not work.I have done:Copy file to folder NGXMCP_PP_2.02.ssi Where You Have Your ssi files (can be Any folder of choice)4. Make reference to the new NGXMCP_PP_2.02.ssi in your file sioc.iniWith The line CONFIG_FILE = **** \ NGXMCP_2.02.ssiFolder location is your **** Where You copied the. Ssi file5. Copy file to your FSX NGXMCP_202.lua \ Modules folder (where you Have Your FSUIPC.dll)6. Make reference to the new NGXMCP_202.lua in your file fsuipc4.iniwith[Auto]1 = lua NGXMCP_2027. Start up FSX and SIOC and enjoy.my registered FSUIPC is 4.7.As I start the MCP? ssetup.exe start and select fsimulator x using FSUIPCthe sioc.ini MCP is activated and the MCP lights, but no key 737 of the acts on the PMDG NGXWhat I have to do?How I can make it work?thanks for the help.