hayhay7789
-
Content Count
25 -
Donations
$0.00 -
Joined
-
Last visited
Posts posted by hayhay7789
-
-
I am trying to use the SPAD software to use the Saitek BIP with the PMDG 737NGX. First I uninstalled the profile software, but then my yoke was unusable with FSX so I had to reinstall the profiling software. However, I did not uninstall ProFlightPlugin. However, when I use the 737NGX the panel doesn't work properly. As seen here:
http://youtu.be/_NV0joSJOGM
I really hope to get these working. I plan to purchase the multi, radio and switch panel as well
Any help would be appreciated. Thank you
EDIT: Also, it seems the wrong lights turn on when I activate a failure via the FMC. So if I set the fuel to 0, the ENG FIRE lights come on and the MASTER WARNING and LEFT FUEL LOW lights remain on. -
I am trying to use the SPAD software to use the Saitek BIP with the PMDG 737NGX. First I uninstalled the profile software, but then my yoke was unusable with FSX so I had to reinstall the profiling software. However, I did not uninstall ProFlightPlugin. However, when I use the 737NGX the panel doesn't work properly. As seen here:
http://youtu.be/_NV0joSJOGM
I really hope to get these working. I plan to purchase the multi, radio and switch panel as well
Any help would be appreciated. Thank you
EDIT: Also, it seems the wrong lights turn on when I activate a failure via the FMC. So if I set the fuel to 0, the ENG FIRE lights come on and the MASTER WARNING and LEFT FUEL LOW lights remain on. -
I am trying to use the SPAD software to use the Saitek BIP with the PMDG 737NGX. First I uninstalled the profile software, but then my yoke was unusable with FSX so I had to reinstall the profiling software. However, I did not uninstall ProFlightPlugin. However, when I use the 737NGX the panel doesn't work properly. As seen here:
http://youtu.be/_NV0joSJOGM
I really hope to get these working. I plan to purchase the multi, radio and switch panel as well
Any help would be appreciated. Thank you
EDIT: Also, it seems the wrong lights turn on when I activate a failure via the FMC. So if I set the fuel to 0, the ENG FIRE lights come on and the MASTER WARNING and LEFT FUEL LOW lights remain on. -
I am trying to use the SPAD software to use the Saitek BIP with the PMDG 737NGX. First I uninstalled the profile software, but then my yoke was unusable with FSX so I had to reinstall the profiling software. However, I did not uninstall ProFlightPlugin. However, when I use the 737NGX the panel doesn't work properly. As seen here:
http://youtu.be/_NV0joSJOGM
I really hope to get these working. I plan to purchase the multi, radio and switch panel as well
Any help would be appreciated. Thank you
EDIT: Also, it seems the wrong lights turn on when I activate a failure via the FMC. So if I set the fuel to 0, the ENG FIRE lights come on and the MASTER WARNING and LEFT FUEL LOW lights remain on. -
I am trying to use the SPAD software to use the Saitek BIP with the PMDG 737NGX. First I uninstalled the profile software, but then my yoke was unusable with FSX so I had to reinstall the profiling software. However, I did not uninstall ProFlightPlugin. However, when I use the 737NGX the panel doesn't work properly. As seen here:
http://youtu.be/_NV0joSJOGM
I really hope to get these working. I plan to purchase the multi, radio and switch panel as well
Any help would be appreciated. Thank you
EDIT: Also, it seems the wrong lights turn on when I activate a failure via the FMC. So if I set the fuel to 0, the ENG FIRE lights come on and the MASTER WARNING and LEFT FUEL LOW lights remain on. -
Out of Memory issue fixed. Thank you everyone! But I still need your help.
SCRATCH THAT
After installing Ultimate Terrain X USA, Ground Environment X North America, and Real Environment Xtreme, it worked fine, so I tweaked my settings a little bit (increased weather settings to Ultra High) and the Weather at max settings did work, so I decided to tweak my scenery. But these settings did not work, the tail and engines turned black and the plane entered skeleton mode, then I got a memory error again. I did save the previous settings, but I made the INCREDIBLY STUPID decision to save the settings that did not work and overwrite the previous ones :(
My settings are back in the exact same places (except for traffic being turned OFF instead of at Very Low) but IT IS STILL NOT WORKING!!!! GRRRR :angry:
I don't ever backup my files...stupid me <_<
Please help me...I seriously need it! Again!
(thanks so much for helping me solve the problem I had previously!)
-
Hey all,
I saw this YouTube video that caught my eye. (video shown below)
As you can see, the graphics are really awesome. Is there a way I can get the same graphics quality with my mid-2010 MacBook? (money is no object)
On FSX, I use the PMDG 737NGX and the Shader 3.0 mod.
Here are my specs:
Windows 7 Home Premium 32-bit (4GB-RAMPatch-Multilingual-12.7.2010 installed)
Intel Mobile Core 2 Duo P8600 (2.4 gHz, 3072kb L2 cache)
NVIDIA GeForce 320M (integrated, 256MB of shared memory)
Crucial M4 512GB Solid State Disk (500MB/s read, 260MB/s write)
13.3-inch, LED backlit, glossy widescreen display (1280 × 800)
8GB PC3-8500 DDR3 SDRAM (1066 MHz)
Thanks for your help!
hayhay7789
-
Out of Memory issue fixed. Thank you everyone! But I still need your help.
I now have a "Fatal Error" issue that occurs in 2 places:
1. When I end a flight with this airplane
2. When I change the airplane's livery while on the Free Flight screen
Please help! :(
-
OOM has been fixed! Thanks everyone! But now I have a new issue...whenever I end a flight with the PMDG 737NGX, I get a Fatal Error. This only happens when I end the flight with the PMDG 737NGX.
Any ideas?
It would also be helpful if you could give me a link to a PMDG 737 FMC tutorial, I can't find any that make sense to me.
-
*bump*
Still getting this problem even with a new SSD! Help me please!
(yes I know, this is an old thread)
-
My advice is dump it.
Do you know any alternatives? I really like carrying passengers around
-
Hey Flight simmers.
Seeing as I've almost solved my OOM issue with the PMDG 737NGX this thought came to mind.
I bought FsPassengersX a while ago and I tried to use it with the PMDG. After about a couple seconds: Fatal error.
I followed the guide shown at http://www.fspassengers.com/forum/read.php?f=2&i=30169&t=30169 but I couldn't get ahold of Brian York so the guide was only partly helpful.
I need ways on how to get FsPassengersX working with the PMDG and preferably with the Mini Display active.
Thanks, and have fun simming!
-
Hey Flight simmers.
Seeing as I've almost solved my OOM issue with the PMDG 737NGX this thought came to mind.
I bought FsPassengersX a while ago and I tried to use it with the PMDG. After about a couple seconds: Fatal error.
I followed the guide shown at http://www.fspassengers.com/forum/read.php?f=2&i=30169&t=30169 but I couldn't get ahold of Brian York so the guide was only partly helpful.
I need ways on how to get FsPassengersX working with the PMDG and preferably with the Mini Display active.
Thanks, and have fun simming!
-
The 320M is decent. But exactly what computer do you have? According to a quick check, the 320M appeared in a 13 inch Macbook Pro. Is that what you have?
In any case, back to your original question: memory error.
Nononono.
I have a white MacBook. The white plastic one. I bought it in 2011.
It came with 2GB of memory, but I upgraded it to 8GB.
The graphics card is a NVIDIA 320M with 256MB of shared memory.
I may soon replace my Hitachi 256GB HDD with a 512GB SSD from Crucial.
-
The Macbooks have no dedicated graphics processor; they use Intel integrated graphics which is part of the CPU.
Actually my computer has a Integrated NVIDIA 320M with 256MB of shared video memory.
but it does mean you will never get a reasonable frame rate.
Very recently I've been getting 30+ FPS.
-
Get a modern Gaming PC ? (Not a Mac)
I got my Mac for college just about a year ago, I don't really want to go out and buy a really pricey gaming desktop when I already have a computer
-
Hi Flight Simmers!
I just got the PMDG 737-800/900 because everybody says it is a really good jet. But I have a problem that REALLY bugs me. The problem is that I can only use the plane for about 2 or 3 minutes until it enters skeleton mode and gives me a OOM message. Sometimes the plane enters skeleton mode before I even start a flight (still in the Free Flight screen).
My settings are:
---------------------
Graphics: Custom
Aircraft: Medium High
Scenery: Very Low
Weather: Very Low
Traffic: Custom
------------------------
In my Graphics I set the display resolution to 1280x800 and set the Global Texture Resolution to High (otherwise can't read the letters in the VC). In Traffic I put General Aviation and Airline Traffic to 10%, and I put Road Vehicles and Leisure Boats to 15%. Ships and Ferries is at 5%.
My system is a Mid-2010 Apple MacBook (polycarbonite/white) with 8GB of RAM, a 2.4GHz Intel Core 2 Duo processor, and a 256GB Hitachi hard drive. I'm using BootCamp to play FSX. BootCamp has a 64-bit Windows 7 installed on it.
What can I do? Can I fix my problem or am I screwed over?
SPAD and the Saitek BIP
in PMDG 737NGX | 737NGXu
Posted
I am trying to use the SPAD software to use the Saitek BIP with the PMDG 737NGX. First I uninstalled the profile software, but then my yoke was unusable with FSX so I had to reinstall the profiling software. However, I did not uninstall ProFlightPlugin. However, when I use the 737NGX the panel doesn't work properly. As seen here:
http://youtu.be/_NV0joSJOGM
I really hope to get these working. I plan to purchase the multi, radio and switch panel as well
Any help would be appreciated. Thank you
EDIT: Also, it seems the wrong lights turn on when I activate a failure via the FMC. So if I set the fuel to 0, the ENG FIRE lights come on and the MASTER WARNING and LEFT FUEL LOW lights remain on.