theophile
-
Content Count
38 -
Donations
$0.00 -
Joined
-
Last visited
Posts posted by theophile
-
-
Hi,
Can one run the p3dv5 version in p3dv4.5?
-
Thanks!I was wondering how they actually manage the VS.Sorry about the empty spaces,but I am not very computer savvy!
-
Ok, guys,,I was using the elevator trim to set a VS speed.I really appreciate you guys taking the time to answer here.
Thank you so much!
-
Hi,
in my setup,I have joystick buttons assigned to elevator up trim and elevator down trim.In the Falcon 50,the AP disconnects when I use these buttons.This is mentioned in the
manual.In other aircraft I was able to find the aircraft dat file and correct this.How do you correct this in the Falcon 20?I want to keep using my elevator trim buttons on the joystick.
Thanks for any advice.
-
Best flightsim plane of them all,and I own them all:PMDG,Flightsimlabs,Maddog,A2A and many more.
Some simple Carenado aircraft sometimes crash my sim,the dash8 never has.It runs in the mid 50
fps on my average system,and this is P3Dv4.5 in Ultra settings,with Active Sky and Little Navmap running
concurrently.I simply cannot say a bad thing about this software,it is simply amazing.I would say:if you buy
only 1 sim aircraft to experience professional line flying,buy the Majestic Dash 8.And yes, the extra
20 dollars for the Pro version is certainly worth it.
-
I own both the JF L1011-500 and the CS L1011-100.They are both decent aircraft,but my preference is to the
CS version.Let me first point out the positive things on the JF with respect to the CS:
There is a galley smoke test
There is a brake temperature test
The altimeter must be set manually below 18000 feet
You can effectively detach the DLC
The chronometer is good:up to many hours of flight can be recorded (no chronometer on the CS)
The oxygen masks can be tested
Now on the down side (JF vs CS):
The slat monitor test is incorrect
There is no side window heat
There is no external power
There is no alt antiskid test
The lighting in the dawn and dusk zones is very bad
The INS lines up extremely slowly
Fire test lights do not light up
There is no turb cooling air light
Wheel well fire test is incorrect
No oil quantity test
APU works without fuel supply
COM frequency logic ( if you go up from 124.95,you get 125,i.e. the integers and the decimals are not independent)
No functioning weather radar
the AP VS switch goes in the wrong direction
no voice recorder test
only the main door opens (in P3D v4.5,which I use)
incomplete light test
you cannot disconnect the AP from the yoke
No sunscreens
No payload/fuel configurator
As far as the flight model is concerned,both are probably not very correct,but the JF version of a landing with
DLC is totally wrong.I was a real life pilot myself,and I would never ever fly a plane with these landing characteristics.The CS version is landable with DLC,although it feels somewhat rigid.
I love the Tristar,and in my opinion CS has succeeded better in simulating this wonderful aircraft.
-
Having reloaded the Falcon for the third time,I finally got everything working.(except still no TCAS whatsoever,even using only the default P3d aircraft).
I am grateful to now have a fully (or almost) operational Falcon 50.
-
Having said all this,the Falcon50 still remains my favourite aircraft,I even prefer it to my (very expensive) PMDG 747-800
- 1
-
I did not notice before because all of my previous flights where less than 1 hour long,so the feeder tanks were sufficient there.Once I started doing
a longer flight,I ran out of fuel in the nr1 and nr3 engines,and because the nr1 and nr3 feeder thanks were empty,I could not do an air restart.
-
I am having exactly the same issue in P3D v4.5! All switches correct and still,the feeder tanks empty out.
-
Thanks,but I should at least get the TCAS visual test,right?I redownloaded the software from Simmarket,reinstalled it and again,no TCAS at all.
Maybe it is a P3D v4.5 thing.Any other P3D v4.5 pilots experiencing this?
-
First of all,nothing but praise for this wonderfull software.I love the way she flies,her wonderfull old style cockpit,her outside looks.I know that the competition also has a
Falcon 50 to offer,but this,in my opinion cannot compare to the Flysimware Falcon 50.
I have only 1 thing that does not seem to work.I am running P3D v4.5 64 bit.I have the F35 installed as my startup flight.I have a functioning Weather Radar.But the
TCAS does not seem to work.Not in STBY,not in TARA,not in TA,not in TRANSPONDER.When I push the test button,I get the correct sound,but no test image.
My airtraffic program is Traffic 360.I have it set for 75% traffic in the P3D settings.I tried 100%,but this makes no difference.I want to mention that TCAS works
in my PMDG airplanes,so it is not my computer that is at fault here.Maybe someone out there knows what the problem might be.I already reinstalled the Falcon
once to clear another problem.Could anyone please advise here?Thanks for any suggestions!
-
Hey,thanks a million! That works!
-
Hi,I have a weird issue.I checked the forum and no one else seemed to have experienced this.When the airplane is powered up and the avionics switch is on,all avionics light up
EXCEPT the pedestal NAV1,COM1,NAV2 and COM2 units.Their on/off switches are ON.Any advice here? I tried a startup situation with another airplane with the avionics ON,
but this does not change anything.I completely reinstalled the aircraft,but again nothing changes.Thanks for any advice.
-
Sorry,I am mistaken.The readout on the FMS is in pounds,the readout on the dashboard is in KG.You are right about this issue.
-
You cannot actively transfer fuel from one tank to the other.You can keep the fuel in the 2 tanks equal
-
I think the fuel weights are in KG
-
Yes,and I now know that the best thing to do is to put the fuel crossfeed valve to open at the beginning of the flight.This does indeed keep the
fuel tanks balanced.
-
All of a sudden I found that it does work.With the HSI on full arc and the WX switch to on,I got a working WX radar to my big surprise.I hope you
find this too Madair01 and thank you for your reply.
I was also thinking that the TCAS was not functional,but there too,I got an image of an approaching plane.
Vert satisfied with this plane now!
-
Would anyone be interested in doing a Bangkok Air repaint?
-
I agree on the beacon issue
-
Hi,
Does anyone know how to operate the fuel crossfeed on this aeroplane.Putting the crossfeed valve to open and shutting one of the fuel pumps does not seem to have any effect.
If you use the hotel mode prior to startup,you get a fuel inbalance and it would be nice to equalize fuel tanks during cruise flight.
-
To 46 pilot:
Thank you very much for your insights into this matter and for your general flying tips.I am an (amateur) real life pilot and I have no doubts that
your words on the PL white notch position are indeed correct.When in this position ,the airplane seems to behave as she should behave for this
type of turboprop.Ever since I applied this,the airplane seems to have the correct speeds and engine temperatures.
I do have one question:when on the ground after landing and with the right engine in hotel mode,if I then want to shut down the right engine,do
I take it out of hotel mode first (letting the props rotate),or do I shut the right engine down in hotel mode?The manual seems to have nothing to
say on this matter.Thanks for any replies!
-
Hey,
Overall I am very satisfied with this new Carenado addon.So far I have flown 4 flights with it and she performs quite adequately.I do have a question:does anyone know how to
make the weather radar appear on the HSI? I do have Active Sky active but I receive no returns.(I put the WX radar switch in the cockpit to on);But I see no returns on any of
the possible HSI screens.Glad for any answer!
Thrustmaster Boeing TCA quadrant
in Hardware Controllers: Joysticks/Yokes | Throttle Quads | Rudder Pedals | Drivers etc
Posted
Hello,
I recently purchase the Thrustmaster Boeing TCA quadrant,but can find nowhere how to program the autopilot knobs:IAS/Mach,HDG/TRK,Altitude and the SEL button.
I found the settings for MSFS,but not those for P3d.Would anyone be so kind as to show me how to do this?I was able to program all the other buttons.
Thanks!