Davit Abesalashvili

I use CI 30

Hello. I have problem with autothrottle. Maybe it's stupid mistake i'm making but I can't solve it. After taking off I engage AP and A/T and I can't set specific speed. Display shows CLMP and I can't control speed by A/T, only manually. What to do to solve this? also I can't get Vspeed from FMC. I set weights, altitudes, route and other things but nothing.

Hello again. Yesterday I removed all FSUIPC filed, scanned Registry(just in case), reinstalled and registered FSUIPC and I flew without problem.

Ok I'll test it tommorow and let you know if it help. By the way I found quick temporary solution, if it help others. I opened RAAS proffesional menu, made some changes saved and FSUIPC appeared again. But it was temporary, freezing appeared again after some time, did same thing and FSUIPC appeared again, then after some time I started descend and there was no more problems. I don't know why or how RAAS helped but it did "it's job" .

I don't know if this two case are related but during cruise after same time I had problem with blackbox A330 throttle. Throttle went up to MAN TOGA and I couldn't return it to normal state. Then I didn't checked FSUIPC but seems reason is it.

I'm fling now and have same issue. I checked 1 hour ago(4 hours later from taking off) and it was OK but now I'm less then 160 nm from TOD and FSUIPC disappeared and freezing started.

It's in FSX folder. D:\Microsoft flight Simulator X\Modules\(there are FSUIPC files)

yes I installed it yesterday. I I checked it an modules folder is there with FSUIPC files

Hello again(this is my second post today). I was cruising at FL370 from EDDF to OMDB everything was fine during taxi, take off, climb and part of cruise. I was flying for more than 3 hours nearly 4 and during cruise I was watchin film and time to time I checked sim and everything was fine(no freezing). After that (film was over a long ago) I noticed that screen froze and after some time continued. It continued and I count freezing and "working" time. Sim froze for 15 second every 6 seconds. I remember that I had problem with majestic dash 8 and FSUIPC auto save so I thought it was problem and decided to turn it off but FSUIPC wasn't running it wasn't in addon menu. Something in mind?

Ok thank you very much

Hello. I have question why FSX shows lower fuel percentage than it's actually? I was flying EDDF-OMDB with 134150 Lb of fuel and when I enter that value in FMC it showed it was 41% but in Shift+Z(I don't know what it is called) it shows 3% less value and why?

Hello. I'm using Blackbox A330-300 with updated AIRAC. It's my first flight across Atlantic. Route that I get is EDDF SID BIBTI UZ29 NIK UL610 LAM UL179 CPT UL9 DIKAS UP4 EVRIN DCT LIMRI NATB TUDEP N439A EBONY J573 ENE STAR KJFK . I know how to program FMC, but I got stuck on entering airway "NATB". I found that I should enter coordinates instead of "NATB" and they are 53N020W-53N030W-53N040W-52N050W. When I enter this coordinates they aren't in database and how to enter them correctly?​

Hello. I've recently noticed that when I enter in slew mode aircraft rotated counterclockwise or slowly moves backward. What's wrong? I pressed some key?(if I did why it doesn't fix after relaunching FSX?). I'm using fsdreamteam GSX and when I try to configure aircraft parameters(door positions) I can't do anything because GSX uses slew mode in configuration and because of this slew movement I set wrong parameters. Can you help me?

Hello.I bought Aviasim leicester X yesterday, it seems good but while taxing on taxiway my aircraft crashes for no reason,like it colided something,but there is nothing but air. I get crash somewhere in the marked area, but I can't see any obstacles there. Can you help me?

Hello.I have little problem. As you can see reverse trust spray is behind engines and it shouldn't be directly below engines? I saw some videos/images and it's below engine.

Thank you Kevin for reply but it doesn't work

Hello.I'm new user of FSFX products.I have a question.I tested it on default A321.Vortices work fine but I notices when I land little roughly there are default flat vortices and why?

Can you post here screenshot of radio panel?How it should be?

Hello.It is almost perfect aircraft with one problem.If i shut down engines,shut plane to cold and dark or load it with cold and dark state and after it I prepared A/C for flight I can't contact to ATC.My radios are on buthhappens nothing.But if I have ready for take off state from the star I can contact with ATC and what may be problem?

Hello I was using T7 for a while and after installing SP1 I have problem.When I take off and aircraft is about 1500 ft above from ground Displays are going wild.PFD horizon rotated very fast with no break and ND is also unstable.Aircraft calls "bank angel","pull up","terrain" and other things however aircraft doesn't do any strange thing it flies calm,but inside it is horror.Can you help me?

Here is image.Have a look.

Hello everybody.I have just bought 777(nearly 1 hour ago).After I installed it I have tiny problem.Everyting is awesome but PFD has red cross.Like I'm testing TCAS(I didi test but it isn't removed).I have reinstalled T7 for 3 times but same problem.Please help me.I have been waiting for this purchase for 2 monthes.

I am flying from Tbilisi to Dubai exactly right now with 737-700 but I can't see them.

Hello everybody.I am using 737 for over 3 months and when I first install it I had wing view from cockpit.Till then I have reinstalled software and can't add wing view and please tell how to do it.

Hello everybody.I have just reinstalled acceleration pack and till then I have gauge problem.Here are photos.Also I can't click on anything in cockpit.