BadgerBtU
-
Content Count
28 -
Donations
$0.00 -
Joined
-
Last visited
Posts posted by BadgerBtU
-
-
I just got v.2.66 when I enter registration key it fails. I tried going to SimTweaks.com and it fails to load. All other websites load fine. Need help
-
You could remove the afcad files (bgls) from the my traffic/scenery folder. They are meant for default airports which have few gates. Since, you have add ons airports, you won't need them.
Thanks for that tip. I renamed the BGL for KIAD and added MyTraffic back in the scenery library then run the vox indexer and it worked. I haven't intalled the addon airports yet so this was happening with the default airport but everything is good now.
-
I also noticed so far that at KMRY, Monterey Regional Airport by Orbx, airline traffic shows up inside the passenger terminal, and aircrafts are taxing through buildings.I to had this problem at KIAD which was one of my addon airports so I decided to remove the sim and all addons and reinstall them and test after each addon was reinstalled. Everything went fine until I install MyTraffic thats when the problem started again. All the other airports were fine except KIAD. To fix this I just removed MyTraffic from the Scenery Library. I ran the sim and still had the AI traffic like normal and they were following the taxiways in the correct way.The drawback to doing this is when you have to run the VOX indexer you have to add the MyTraffic scenery back to the scenery library or you will loose all your AI until you do add it back.
-
Thanks for the reply. I have been flt simming for years and have seen that option a million times and never thought of it. I might be getting Alzheimer's.
-
I am using the native ATC in prepar3d v3 when I ask fo to get clearance not only does he ask for clearance but the native atc asks to. It's like I just clicked on native atc window to get clearance. Is there any way to remove the native atc from asking for clearance?
-
I appreciate the reply I am having issues with a windows update so I will need to reinstall all my flightsim programs and then try again.
-
I have tried everything I've read in the manuals and on the forum about how to get MCE to interact with ATC with no luck. I have tried all the voice's. Microsoft Zera and MCE Lorna Request IFR Clearence but I get no response. I have tried the native ATC and PF3. Even Zera and Lorna start to get frustrated with the lack of response. Is their not one manual that explains in detail on how to set this up?I have included my MCE.ini[WINDOW]Left=412Top=132NoActivate=1 //(1 to make sure MCE doesn't take the focus out of the sim, when the UI is clicked, 0 otherwise)NoSound=0 //(set value 1 if you want to cut the various UI sounds emitted when clicking buttons or MCE minimises)NoFullScreenDraw=0 //(set to 1, to avoid the occasional graphics artefacts than can happen when MCE UI tries to draw, and the sim is in full screen mode)StartToTray=0 //(set to 1, and every time MCE starts, the UI will not appear unless you click on the icon in system tray)[FEATURES]ExecuteCaptainOrders=1ReadCheckListWhenAsked=1PilotSpeaksToAtc=1CopilotReportsFailures=1EnableInterfaceVoice=1[OPTIONS]Debug=0 //(only set this to 1 when instructd by support)PilotIsBVI=0 //(must be set to 1 for Blind Visually Impaired Pilots)UIlanguage=1033MikeTuneOnStartup=0EnableOptimizations=1AutoStartWithFS=0MinimizeToTray=0MoreResponsive=1TrainingCompleted=1RandomFailures=0TweakFsConfig=0AtcMikeUseIvao=0ForceCopilot=1AudioIn=AudioOut=PilotName=mitchellShowCommands=1ForceCommands=0 //(deprecated. Do not use)DisplayTime=3000UseMacros=1 //(must be set to 1 For VoxKey to work)UseNarrator=0LoudData=0EnableAnnouncements=0UseVoxScripts=1DisableNagging=1GroundServicesMode=NativeNoBadLanguage=1NoFMAcallouts=0 //(set this to 1 if you don't want FO to monitor FMA (Flight Mode Annuciator))NoEngineStartCallouts=0AllowActionOnEvent=0V1CalloutIsGO=0 //(Enable this to follow Lufthansa standard call-out procedures. PNF calls-out Go instead of V one)ReduceChatter=0 //(Enable this if you want to cutout on the amount of FO speech. FO would be more concise)[PROFICIENCY]Level=3[sPEECH]Volume=100CpuUsage=75SpeechPace=750InprocReco=1DisablePitchChange=0MaxConcurrentTasks=4NumLockKeyMutesReco=0[sKILL]Tol3=030,030,400,900,100,100,100,050Tol2=020,020,200,700,075,075,075,030Tol1=010,010,100,500,050,050,050,020Tol0=005,005,050,300,025,025,025,010[VOICES]Voice0 =Lorna,0,0,0,1Voice1 =Trav,0,0,0,1Voice2 =Stella,0,0,0,1Voice3 =William,0,0,0,1Voice4 =Microsoft Zira Desktop - English (United States),0,0,0[ATC]Mode=NativePreventNativeATCCancellation=0UseRadioNoise=1StaticNoiseLevel=1SecondaryNeedAtcWindow=0atc1=0atc2=0atc3=1atc4=1atc5=1UseRadarContact=0IgnoreRC4Registry=0 //(Set this to 1 when RC4 isn't installed on the same machine as MCE)RC4path=IgnorePFERegistry=0 //(Set this to 1 when PFE isn't installed on the same machine as MCE)PFEpath=IgnoreFlightPlan=0FlightPlansPath=C:\Users\Main\Documents\Prepar3D v3 Files[sIMCONTROL]FsPanels=1FsMenus=1FsDialogs=1FsKneeboard=1ViewsAndViewpoint=1[GAMEPAD]JoyManID=Pro Flight YokeJoyProdID=Pro Flight YokeJoyButton=2UseWithVoxATC=1 //(set to 1 if you want to use the same joystick assignment with VoxATC. It will ensure FO doesn't listen to your speech while the joystick button is held down using VoxATC)[GO-FLIGHT]Use=1 //(set to 1 for MCE to monitor the manual radio dialling process. Whether you do that via mouse-clicks or by rotating Go-Flight or other hardware modules)TimeOut=3000 //(sets the amount of time in milliseconds that must elapse after you last click on the radio switches in VC panel, or physically rotate a button on the radio rack, before MCE assumes you are finished with dialling. Values between 2000 and 5000 are accepted)[CHECKLIST]NoStateCheck=0 //(when set to 1, co-pilot will just read the checklist aloud, wait for any answer and move on, without challenging you on any item. Useful for people running simpits with hardware switches. It can be difficult for FO to read these)Strict=0PMDG 777-323ER American Airlines=C:\Multi Crew Experience\ChkLists\PMDG_777_check.txt[MECHANIC]PushWithGSXandAES=0[RAMP]NoRampToOfficeTalk=0NoPaxDoorsAutoHandling=0NoCargoDoorsAutoHandling=0[PACE]ActionDelay=1500 //The simulated delay that takes place before FO takes action. Values from 0 to 4000 milliseconds)MCPdial=100 //The pace at which FO increments or decrements MCP values from 100 to 250 milliseconds). Doesn't apply to some aircraft where the value is hard codedButtonPress=800 //The simulated time in milliseconds it takes the FO to flip a single switch. Values 500 to 2500 are acceptedVoxKeyAction=1000 //The delay in milliseconds between two consecutive VoxKey actions. Valid entries 0 to 4000.[sPLASH]NoSound=0[VATSIM]NotifyPTTstate=0[PILOTS][MISC]Path=C:\Multi Crew Experience[TERMINATE]
-
Thank you for the reply.
-
MCE doesn't interact with VOxATC at all. The option is just to prevent MCE FO trying to interpret VoxATC directed speech as MCE commands.If MCE won't interact with VOXATC then which atc program will it interact with. I have P2ATC, PFE, RC4 and VOXATC. If need be I will buy another as long as it will work.
-
Thanks for that info I will make these change and hopefully that will fix my problem.
-
Can someone please tell me the steps to get the FO to talk to VOXATC? I changed the MCE.ini use voxatc to 1 and had the FO do the comms. but he still contacts the native P3D atc.
I would also like to know how or if the FO can change radio freq.on his own.
I don't know if you can tell but I'm new to MCE so I will probably be asking more questions. Any help would be appreciated even if its to point me to the right manual.
P3D 3.5
PMDG 777 300er
FS2CREW [Turn Off]
VOXATC
-
I changed voice back to an mce voice and changed a the way I had the call sign setup for the aircraft and now when fo says the call sign he says American 28 and when he says off it sounds like off instead of aww. Thanks for the reply
-
I just bought MCE after trying the demo and have tried to find this info in the many manuals to no evail.
1: When the FO says off it sounds like he is saying aww. Can I edit some file to fix this? I use Ivona voices
2: I fly the PMDG 777 300er my call sign for the plane is American 28 but MCE uses my planes registration number witch is AAL28 [alpha alpha lima 28] How do I get him to use American 28.
-
Ok, here goes. Good luck.
The method is to create a series of linked folders so that it appears that an installation of P3Dv2 is installed on the computer. When VoxATC runs it is "tricked" into thinking it is reading from a P3Dv2 installation, when it is actually reading the P3Dv3 files. Carry out the following to set this up. Please read the notes at the end before proceeding.
The first step, though, is to check the registry. I believe that VoxATC locates the P3D installation from the following key (the following is taken from an export on my PC); my installation is at D:\P3Dv3.
---
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lockheed Martin]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lockheed Martin\Prepar3D v2]
"SetupPath"="D:\\P3Dv3\\"
---
There should already be a corresponding key for v3. You must create the key above for v2, but make sure it is referencing your v3 installation folder.** One way to do this is to amend the text above within the dashes to point to your installation folder then save it as a text file with a *.reg extension. Double-clicking that file should then import the entry into your registry.
The folders we need to create links to are
%userprofile%/Documents/Prepar3D v3 Files
%localappdata%/Lockheed Martin/Prepar3D v3
%appdata%/Lockheed Martin/Prepar3D v3
%programdata%/Lockheed Martin/Prepar3D v3
Run a command prompt with admin priveleges**, and type the following commands:
cd %userprofile%\Documents
mklink /d "Prepar3D v2 Files" "Prepar3D v3 Files"
You should find, if you look at your Documents folder, that a new folder "Prepar3D v2 Files" (the link) has been created, with a little shortcut symbol in the corner of the icon. The Prepare v2 Files folder acts as a kind of shortcut to the "real" v3 folder (the target). Whenever you or an app accesses files within the v2 folder you / it is actually accessing files in the v3 folder. It is safe to delete the link folder (i.e. it will not delete the target folder files) if necessary; however, deleting individual files in the link, WILL delete the files in the target.
Then do the same for the other folders:
cd %localappdata%\Lockheed Martin
mklink /d "Prepar3D v2" "Prepar3D v3"
cd %appdata%\Lockheed Martin
mklink /d "Prepar3D v2" "Prepar3D v3"
cd %programdata%\Lockheed Martin
mklink /d "Prepar3D v2" "Prepar3D v3"
On my PC, at least, after doing the above, VoxATC works. I would recommend you do a fresh VoxATC install at this point.
NOTES
** if I am assuming too much Windows techie know-how here, please let me know, I can explain further.
- v3 is the only version I have installed, if you also have v2 installed then this will not work.
- for ages I have had an issue where (sometimes) if I run the programs using the shortcuts the installation creates in the start menu, it goes into an install routine instead of running the program. I don't know if anyone else has this issue, and I have no idea what causes it. What I do is to create a shortcut on my desktop to the VoxATC installation folder and run the *.exes directly from there.
- SimulatorSelection.exe now crashes on my machine. Doesn't really matter to me too much as VoxATC works, and I'm only running one version of P3D anyway.
- Run the following (from the VoxATC folder)if the installation fails, or when necessary:
Registrar.exe (to register VoxATC with your key)
AdvancedSettings.exe (config)
JoystickSelect.exe (config)
VoxATCSettings.exe (config)
VAPanelSelect.exe (to select which aircraft to add panels to)
VoiceConfig.exe (to configure voices)
VoxATCIndexer.exe (to index scenery, aircraft, etc. you should run this any time you make scenery changes or add aircraft)
- I believe all this to be perfectly safe, but you tinker with the registry and make the changes above at your own risk... etc, blah. Please don't blame me if something breaks.
- Superficially, it appears to work for me. I have not tested in depth, and problems may still crop up.
- Other addons will think you have a P3Dv2 installation on your PC. I would just select to install to v3 (where offered), or just let it install to v2 if not. Most addons now recognise v3, but for those that don't I don't think there should be an issue.
- I am running Windows 10 64-bit. Folders / registry keys might not be exactly the same for other versions.
- I believe that this is doing manually (some of) what the migration tool does for you. If you are using the migration tool already, it's possible there could be unintended issues.
I used your instructions here and voxatc works great now with the exception of the FO not changing radio freq. Thank you.
-
What sim are you using? did you hit the zero key before making your request?
-
I received an email on the 16 of Nov. basically saying the same thing "The next release of VoxATC will support P3D 3. It should be available in
about 6 weeks or so." This would be A good Christmas gift to myself.
-
Never mind I found the problem. It was me. :lol:
-
Never mind I found the problem. It was me :lol:
-
when flying the PMDG 737 NGX I get an sdk error when stating FS2CREW WHEN VOXATC IS RUNNING.SEQUENCE1: Make flight plan with efb2: Start fsx3: Load pmdg 737 ngx, set airport kbos, time, flynow4: After flight loads and pmdg initializes I load flight plan5: I goto file and save flight then file and load flight6: When flight loads voxatc window is already their so I start fs2crew thats when I get sdk errorEverything works fine before I save and then reload flight but I only get the local flight,taxi for pattern and radio check menu.I never had this problem until I installed voxatc
-
when flying the PMDG 737 NGX I get an sdk error when stating FS2CREW WHEN VOXATC IS RUNNING.SEQUENCE1: Make flight plan with efb2: Start fsx3: Load pmdg 737 ngx, set airport kbos, time, flynow4: After flight loads and pmdg initializes I load flight plan5: I goto file and save flight then file and load flight6: When flight loads voxatc window is already their so I start fs2crew thats when I get sdk errorEverything works fine before I save and then reload flight but I only get the local flight,taxi for pattern and radio check menu.I never had this problem until I installed voxatc.I have also posted this in voxatc forum
-
HIFI has deleted my account, I can only guess it's because I did not verify my email. I created a new account put in all info order number,key, name all that stuff and checked it twice. That was an hour ago and still no email. I have checked spam folder it is empty.
-
Yes I have checked my spam but nothing their. This is the only time I can remember not receiving an email that I was expecting. Can I post My issue with active sky here to try and get some help?
-
I bought active sky on 10/13/13 downloaded it and installed it. I am have a problem with it so I registered at HIFI so I could put in a ticket but never received the email to confirm my email. I tried to login and it says my account has been disabled, so I sent hifi a ticket to sales explaining the problem with the login and still no reply. So all in all i'm stuck with a program that does not work right and I can't contact them to get help. Anybody have any idea's that would help me.
Can't Register
in P3D Tweak Assistant (PTA) and RealismShaderPack
Posted
Thanks for the reply Matt. Sometime stuff happens.