Jump to content

disco79stu

Members
 View Profile  See their activity

  • Content Count

    302

  • Donations

    $0.00 

  • Joined

  • Last visited

Posts posted by disco79stu

  1. Posted

    9 hours ago, SergeyPe said:

    WarBRD and Warthog are completely interchangeable both mechanically and electrically so any Warthog-compatible stick will work on WareBRD. To me it looks strange that flightsimprojects offers not one, but two "Virpil- compatible" sticks: one for WarBRD and another one for MongooseT-50CM2. The funny thing is that they show the same picture/ video for both Virpil bases (most probably because they never had a MoongoosT😀). So in my opinion your A320 stick will fit fine.

    Thanks, that's what I assumed too. I think I'll take my chances and just give it a try. 

  2. Posted · Edited by disco79stu

    Hi,

    so I‘m currently using the Thrustmaster Warthog base with a A320 stick from flightsimprojects.

    Now I‘m thinking about switching to a Virpil WarBRD base and since the website states it is compatible with Thristmaster grips, I wonder if my A320 stick will then fit on there too. 

    Flightism projects sell separate A320 sticks for both bases, so it would seem the one doesn’t fit the other, but since Virpil says TM sticks will fit, I am confused. 

    Does anyone know?

    Thanks

    Stu

    PS: I of course also asked the guys at flightsimprojects, but they (suspiciously 🙂 ) never responded. 

  4. Posted

    Hi Marc,

    just a small request, would it be possible to add a "bounce detection" of some sort? 

    Right now, when I bounce a landing, it will record only the final touchdown, which after a bounce is more than a greaser and not really what I'm interested in afterwards.
    Slamming it down on the "first" t/d isn't recorded but the smooth second one is, which tells me nothing about where (and how bad) I messed up 😄 Can it detect both? Or at least rather the first one than the other(s) 😉

    Thanks

    PS: also still hoping for a vertical altitude marker/line on the graph where that I can set somewhere.....(in my case 30ft - Airbus flare mode activates). Would make it easier to evaluate the timing during flare etc....

  5. Posted

    20 minutes ago, qqwertzde said:

    FSCaptain, A Pilot's Life, NeoFly, OnAir, Air Hauler, Skypark, ... 

    Thanks for the suggestion. I actually own most of them, but unfortunately none provide the above functionality afaik, mostly due to inaccurate schedules/data or lack of an option to exclude certain airports etc. A pilot‘s life comes close (although their airline schedules are also out of date), but it‘s all in a career context, unable to use it only to create a roster of just any airline, so not exactly what I am looking for.

    I will take a look into the two I don‘t have though, so thanks again for the list. 
     

    BR

  6. Posted

    Hi,

    before I try to code something like this myself, I was wondering if anyone knows of a tool or similar that creates random flight rosters or schedules based on real world flights (ie for VA flying)…. ?

    So basically a tool where I can set an airline, destinations/airports I own, desired max flight time etc. and the tool spits out a random list of real route pairs of that airline, either A-B, B-C, C-D etc. or A-B, B-A, A-C, C-A etc… 

    Does something lime this exist? 
     

    cheers

     

  7. Posted

    10 minutes ago, kiek said:

    The aircraft follow the directions of historic live ATC. They use the runway that was in use at the time of recording. 

    In P3D you can get the historic weather provided by a third arty addon, but not (yet) in MSFS ... However, you can manualy set the weather a bit like it was historically.

    What challenge do you mean? PSXT aircraft are not detected by flightsim ATC programs.

    Okay, got it, thanks for the explanation.

    Well, by "challenge" I mean the general possibility that you approach/depart a runway and another plane comes in head on from the other side 🙂  But then again, that's kinda always a bit of a challenge with AI. 

    Thanks again,
    BR

  9. Posted

    Hi,

    I'm thinking about implementing this PSXT/RealTraffic setup and before I go ahead and purchase anything, I'd like to know how the historic traffic (a must for me) acts regarding the weather situation in MSFS.

    Since MSFS doesn't yet provide historic weather, it would be a historic traffic in real time weather. Does the traffic then use the runway that is suitable for the current MSFS weather condition, or will it fly the track that has been "recorded" when the flight took place IRL? (not sure how this works, if it's just the aircraft that are historic or the complete flight incl. flight plans and departures/arrivals etc.)

    Thanks for any info!

    Stu

     

  10. Posted

    10 hours ago, marcom said:

    Hi Stu,

    I took a look at your recorded approach data and it shows you landed with 0.6° of bank angle. In the summary listed on the top, this will get rounded to 1°. But in the plot it won't be so the deviation from 0° will be very small.

    All in all, your approach looked very stable and smooth so I wouldn't worry about a 0.6° bank angle at touchdown 🙂

    Okay, I'll stop chasing the zero then 😄

    Thanks!

  11. Posted

    Hi there,

    I recently noticed that on my last 30+ landings, the report's landing information always shows a 1° bank on touch down.
    I find this "consistency" a bit strange, and I know that I have had very leveled out touchdowns as well. Plus, on the curves you can also always see a 1° "bank" even during rollout.

    Could it be that the Fenix and Aviaserver are somehow misaligned?

    spacer.png

     

    Cheers

    Stu

  16. Posted

    Hi,

    I've been using aviaserver/flight monitor for months not and updated to the latest version today when I found out that while aviaserver is running, my joystick inputs won't "reach" the sim (I'm using the FSLabs A320-X). Aileron and Elevator controls are completely dead, it's only when I close aviaserver, they are working again.

    Any advice?

    Thanks,
    Stu  

  20. Posted

    Okay, you know what, I give up.
    Apparently I'm missing some paths/files, a bglcomp exe which I can't find in any SDK, ADE asks me for the sim I'm using but the drop down menu isnt working, I can't enter the scenerey.cfg location manually... 

    I guess this is for very FS9/FSX sceneries, not P3D.

    But thanks for your patience and help. I'll just use the default ILS freq then.

     

  22. Posted

    10 minutes ago, G-RFRY said:

    Open settings then option and select save with BGL in the project tab all mine are saved to my backup drive, then place the new BGL in the Data /Scenery for the airport as shown for EDDL. But don`t delete the original Justsim BGL just edit to .OFF this way if you do it wrong you can go back by removing your BGL and turning back on the original BGL by removing .OFF . I use upper case then i know it`s my edit .

    https://www.flickr.com/photos/154944674@N05/51839049472/in/dateposted-public/

     

    Thanks, but it's not quite working yet.
    In the options you mentioned, I have a "With Bgl File" option, but even when I activate it, it will still only save a .ad4 file.
    I guess I'm still doing something wrong....

    eEm5FKK.png

  23. Posted

    1 minute ago, G-RFRY said:

    https://www.flickr.com/photos/154944674@N05/51839960441/in/dateposted-public/

     

    https://www.flickr.com/photos/154944674@N05/51839019772/in/dateposted-public/

    This is the pro version but try selecting a new frequency from the drop down box this a JUSTSIM airport Bgl,

    The pro version for $10 is well worth it and supports the developer for Flight sim the best tool you can learn.  

    Sorry, maybe I expressed myself unclear here. 🙂

    Thanks for the advice, but I did actually manage to change the frequency, not problem there.
    What I was asking was how I can save this modification into the BGL I opened. I don't see any command or anything for this....I can only save as a "project". 

     

  24. Posted

    2 hours ago, C2615 said:

    Use ADE(airport design editor) to edit it and recompose should be fairly easy, just make a backup in case the bgl content some thing that couldn't be compose (most likely to seen in some non-photo real freeware, on high end one those "some things" normally in different file)

    Thanks for the tip. I have no experience with ADE, but I managed to open the BGL I thought was the right one and changed the frequency for the ILS 27L to 109.95.

    But I couldn't figure out how to "save" the bgl... Can you give me another hint? Did I even do this correctly? 🙂

    Thanks!

    spacer.png

     

×
×
  • Create New...