nantucket

If I can help someone else, I certainly will not hesitate. Your support has been outstanding! Thank you!!

Ok!! Thank you for the information and all the help provided!! The RXP GTN works great!!

Success!! It really helps if you knew what you are doing!! Everything seems to work fine except the knobs (frequency and volume). They work on the popup but not on the gauge on the panel? Also, how do I enable or disable Traffic in the gauge settings? Where are the gauge settings? The RXP GTN is alittle different than the F1 GTN. Thanks again for your help and patience!!

Bert, I successfully loaded the Reality XP GTN 750 to the Carenado 340, however, it's not what I expected!! The RXP 750 has replaced the HSI and fits within the HSI bezel. I still have the F1 GTN 750 in the original location where Carenado wanted it to be placed. Can the RXP 750 be moved to this location, without being a popup, so that the HSI shows up in it's original position? Also, the icons, Traffic, Weather, and Services are muted, not as bright, as the other icons. Is that how it is supposed to be? Sorry for all the questions!! Thanks for your help!!

Bert, I have purchased the Reality XP GTN 750 and downloaded it on my computer. Can you please guide me thru the process of replacing the F1 GTN with the RXP version for my Carenado SF 340? Thanks!! As I stated earlier, my sim platform is P3D v 4.5.

Thanks to both of you for your encouraging news!! I have been hesitating to purchase the Reality XP GTN 750 because I was not sure whether it could be integrated into the Carenado SF340. I have been flying the aircraft with the F1 GTN 750 with no problems until awhile ago. It starts off great, but toward the end of the flight it lags in performance, especially when I load an approach, it has problems following the course and overall hesitates each time I click on a new icon. They recently provided an update. Since then the GTN performance went downhill. But according to the latest post, the up coming Windows 2004 update will provide corrections or the Windows Game Mode should or should not be disabled!! By the time I read all of the opinions, I was completely confused!! So, I think it's time to purchase the Reality XP GTN. I will get back to you, Bert, about replacing the F1 GTN in the SF 340. Thanks!!

Thank you for your quick response!! Sounds easy to me!! One quick question - can the Reality XP GTN 750 be integrated into Carenado aircraft that only integrate the F1 GTN 750? I have sent an inquiry to Carenado about the SF 340 aircraft which only integrates the F1 GTN 750. Thanks for your help.

I have been trying to purchase the GTN 750 with the 30% off coupon. I downloaded the coupon, opened the file and saw symbols, letters, etc. But no coupon code/number. I then tried to download the e-commerce file and was blocked by windows 10 defender, warning of a virus!! My sim platform is P3D v4.5. Any help will be appreciated!!

I am totally confused about what I need to do after downloading PTA v 2.67!! I have P3D V 4.5 with HOTFIX 2. I have been using PTA v 2.66 with Environment Force and Sky Force 3D - No Problems!! After downloading and activating PTA v 2.67, I saw 5 shader file errors: Cloudfx. Generalfx, GPUTerrainfx, FuncLibraryfxh, HDR.hisl. I am assuming that I need to replace the client file in P3D? Not sure if I want to do this?? Your help will be appreciated!!

Consider yourself a Windows guru!! I was able to give myself (User) "Full Control" over the aircraft.cfg file. I now have N390GM in my P3D hangar!! Thank you for your help!!

No - When I try to apply the texture information to the aircraft.cfg, it tells me that access has been denied to the P3D v 4.5 aircraft.cfg.!!

Is it possible to create a repaint/texture for Greg's Premier 1D for Prepared 3D v 4.5? Thank you!

Is it possible to create a repaint/texture for Greg's Premier 1D for P3D v4.5?

Yeah!!! Preset has been applied successfully!! Thank you for your patience and help, I certainly appreciate it. The big problem, I guess, was the shaders not being found? Once the preset has been applied, does PTA need to be left on or can I turn it off while flying in P3D? Thanks again!!

No. It is a .rar file. PTA2-Saldo 4_5 v16 -Mai.rar

Placed your preset in the main PTA folder. Opened PTA, clicked on Preset - Open ( Windows Explorer opened ) with only three files in the PTA folder : Config_Backup, Shaders_Backup and Default .ini. Yet when I open Windows Explorer on my computer all files ( PTA.exe, Config, Shader, your preset, etc) are all present. I went into File Explorer Options and checked " show all hidden Files" but nothing changed. This sounds like a Windows problem that I don't know how to fix?

Uninstalled/reinstalled P3D Client and PTA - All went well. Received a green PTA Activation successful and Shaders integrity OK. I downloaded your PTA2-Saldo 4_5 v16 - mai.rar file. I am still the new guy on the block!! How is this file handled? Place in the PTA folder? Will this rar file be a problem? Thanks for your help!!

I deleted everything and redownloaded PTA. I was not sure how to extract it to its own folder on my desktop ( never did that!!). but I did extract it in downloads to its own folder in downloads. I then moved the extracted folder to C:\ Right clicked on the .exe to run as admin. The program successfully launched!!. Tried doing a preset with SkyForce 3D which resulted in the following: Applying preset C:\pta_2.66\summerishere.ini... ERROR applying preset: source file C:\pta_2.66\SHADERS_BACKUP\Cloud.fx not found ERROR applying preset: source file C:\pta_2.66\SHADERS_BACKUP\General.fx not found ERROR applying preset: source file C:\pta_2.66\SHADERS_BACKUP\GPUTerrain.fx not found ERROR applying preset: source file C:\pta_2.66\SHADERS_BACKUP\FuncLibrary.fxh not found Preset has been applied with errors. See log above Shaders cache cleared Sorry for the confusion, but I am really looking forward to using PTA but can't believe the problems I am running into. Please bear with me!!

I finally activated PTA but am still getting the following errors: Applying preset C:\pta_2.66\summerishere.ini... ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\Cloud.fx not found ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\General.fx not found ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\GPUTerrain.fx not found ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\FuncLibrary.fxh not found Preset has been applied with errors. See log above Shaders cache cleared As you can see, pta_2.66 is now in a folder under my C:\ drive. I did unzip the downloaded file from the website. Why are the errors still showing the zip file and the incorrect location??

Not sure what I am doing wrong!! I downloaded the file from the website to my downloads folder, extracted the zip file which created a pta_2.66 folder in the same downloads folder. I double clicked on that folder which resulted in the PTA icon. I then right clicked to run as admin and nothing happened??

Matt I am currently using P3D v 4.5 with REX SkyForce 3D. So the version of PTA I have is 2.66. I am receiving multiple errors when I attempt to apply presets from Skyforce 3D. The .ini file loads with no problem but I receive the following when I try to apply the preset: Applying preset C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\summerishere.ini... ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\Cloud.fx not found ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\General.fx not found ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\GPUTerrain.fx not found ERROR applying preset: source file C:\Users\Bill\AppData\Local\Temp\Temp1_pta_2.66.zip\SHADERS_BACKUP\FuncLibrary.fxh not found Preset has been applied with errors. See log above Shaders cache cleared Any help will be greatly appreciated!! Thanks!!

Just wondering how I extend/retract the speedbrake switch for the Premier 1A in FSX. I tried spoilers in Controls but it did not work. Thanks!!

Bert I am not sure how to do a PM, but I would like a copy of the AIR file mod for the Carenado CT 206H which corrects the high panel to improve visibility. Thanks in advance!!

I added the MissingTextureAlert=1 to the fsx.cfg, loaded a flight in FSX with the Phenom 100 and flew into an overcast!! I am still getting a flat white rectangle and did not get a Missing Texture Alert message. So it must be something else that I need to change. Maybe it's time to contact Carenado?

I did not think to run that again! Will try tomorrow and let you know the result. Thanks!