EmpireKicking

Still available?

Installing and making it fly and work so no error for me with 2.1 patch :) So far support is shocking. I do have problems and you can read bout it here https://www.avsim.com/forums/topic/593510-emb505-phenom-300-not-100-right-for-v5 Seems I posted it in the wrong selection but seems this board is not active.

Good day to all :) It's not performing that well regards the GPS/map screen on the aircraft. Setting flight plan is fine and switches and how it operates is all fine, it's when I go in more depth and use the zoom and and out of map option is when it gets broken on my p3d v5. When zoom in and out or change the style of map look or whatever, it makes it disappear and all black and takes so long in time to load it in. Zoom in to see more of where the I am and it goes all clear black and then my FPS drops and goes crazy. If I leave it and wait the map on the screen loads back in.\ Even at time zoom in and out or adjust the map the full middle screen freeze and when I click switches or zoom in and out it does not move and FPS drops low again. Says loading then goes away but nothing. even at times when flying if I use the options to much, takes 30mins or longer to see it changed. OetMDnb.png (928×631) (imgur.com) Never happy with it, works in fsx and V4 with nor errors Yet V5 COME ON - can't fly with this. even when loading and not loading and fps drops makes flying hard with fps drops

I haven't read or seen a post already stating regards people who already own carendo products for the other sims like P3D. SInce the release of MSFS2020 and have seen that carenado cessna 182 been out for some time now, and yet still clueless to what I need to be answered about. Nothing on the site about it. Shocking. I own five carenado aircrafts already for P3d, and my question is that do I have to rebuy them again for the new sim or we/those that have owned other products get to receive the aircraft for automatic for the new sim? I'm not a fan of buying the same aircraft for each sim, but since carenado has always been buy it once and then it support all both FSX & P3d. Just need a answer that's all, at least have your new MSFS products aircraft listed on your site for those that want to purchase on site rather then on the Sim marketplace. Even if we have to rebuy products again, at least have a discount code for those that already own the aircraft for p3d.

1440p with i7 3930k at 3.8ghz and can go to 4.ghz

The requirements it's from way to low to way to high for P3D V4 and so it doesn't make sense. FSX is just old and lagging/stuttering with so much addons and orbx scenery. WIth p3d V5 and with orbx scenery and aircraft! the lot you name it 🙂 Will the Asus 1660TI boost clock to 1890mhz will do the job with good FPS and no darn lag. Well.! I do expect to get low fps in heavy airports lol

As the title says, out of the two Carenado aircraft what one should I lead to?

I don't know where about to post this regards FScloud but this is regards model matching and ways to add more aircraft to the list that I have installed on my FSX. I just can't get it to work out when added aircraft to the AllPlanes.txt file so that when FScloud is open and then I can add others to whatever aircraft it needs to be. Like the carenado TBM 850. Last night FScloud was messing my mind up when I was shown up as an bout or another aircraft and to the point that it sis not show me up as I was in a bristol bulldog. There should be an easy why to add more aircrafts!

As long as it's on an SSD and not the C drive then you are good to go 🙂 Even that I do have my FSX in the C drive LOL

@JAT thanks even that they all longer then three hours lol

Planning on doing some flights in the Antonov with the space shuttle. I like to keep it realism and so looking to fit two good flights in that's going to take us into three hours. Yes two flights that's under three hours. If you think two is to much and only want one three hours flight then say. I have some ideas but the airports that I want to go to doesn't really take Antonov.

Darn it.. I missed it rip rip rip

That's why at times when I fly I tend to keep away from airports that will make my sim to have low FPS as it's not easy to fly when it's lagging so badly but 15 FPS is playable I should say

Rain does work for me as it was easy as to install. But regards efacts from the wheels isn't working and yet it depends on what weather

I have it set to 30FPS and using Steve's DX10 fixer and the scenery details is set to medium and when flying sky hign or even at low details airports I'm able to stick with stable FPS at 28 to 30 FPS. When I use Aerosoft and or at airports with high details then it goes down to 15 FPS... Since I Spent good amount of time doing tweaks it was low as 5 FPS before LOL so from low as 5FPS to 15 FPS is an big difference.

Changing the resolution doesn't make any difference at all.. I have and just the same FPS

CPU is an i7 3930k @ 3.8GHz and from the link above he's using an 1080 to start of with

Did some tweaks to the fsx.cfg and made improvements, not much but better then nothing. Able to be in LAX with little more FPS (From 5 to 10-15 FPS) and the textures are loading in faster and more clearly. Still running on high and at 2560 x 1440. It does look so bad if I change it down to the point that the cockpit is unreadable. Aerosoft a320 pack also does tend to drag FPS lower. Not the best hardware, GPU is an 680 rip me!!!

I always wan to improve FSX even more but focus on able to fly to location without low FPS. Last night I did an good flight other then taken off at LAX to YOW and at those airports I had very bad low FPS of under 5 to the point that it was not easy to to takeoff and land but as soon as I left and at FL30 it was around 20 to 30 FPS (FPS set to 40). Resolution is set to 2560x1440 and it looks very very good but AS FSX is an darn 32 bit 4GB memory and at times as pain what Resolution would it run better on.

New with flying Gliders and yet I have learnt it over the days that I have been free. However just can't setup and flight plane that we can leave from one airport to another that's close together. Then once landed at the airport then take off to the next that's near bye. Has anyone flown Gliders before and have created an flight plane? Please Share thanks.....

Well, I have changed the Base Clock (-100) and Memory Offsets (-50) even lower then before and this time I got to last for 125mins without crashing

Hasn't been touched, But as I was going though each settings I just noticed that that it was running 120hz and so I adjusted it down to 60hz. NO idea why it went to 120hz since I'm running an 680 card.... even then it's still does it and gives me that error

Since Friday the 12th FSX has been playing me up regards my GPU Drivers or other-wards display. I have read and done unless options regards ways of dealing with this error. Ever since the 12th of October I updated my drivers and that's when it started. I rolled back and uninstalled allot of times then updated and still the same. Before the 12th it was all good and working fine. The errors that I get are the following! -Display driver nvlddmkm stopped responding and has successfully recovered. -Application fsx.exe has been blocked from accessing Graphics hardware. Anyone have any ideas? or anyone have the same error. End of the day what it's doing top me that when it happens FSX doesn't crash all it does is freeze the display of the game, I still can fly and do the controls and can hear the game sounds just that the display of the game is freeze. Thanks, Everything is running as admin

Fully updated http://www.aero.sors.fr/navaids3.html using the world option and the the world option for ILS. Not the first time using it and I have had it before. But after the updating it and setup and flight plain I keep on getting an message when doing an high altitude airways "Failed to generate a valid airways route. You may want to try VOR-to-VOR or direct GPS instead" I always like to use IFR and when doing long flight or whatever then I pick high altitude airways. Any ideas

I had the same problem also. Windows had an big update and it messed up my sounds and FSX. Best option that you can do is an clean install of FSX, remove everything that you have for FSX, even the hidden files of FSX. Then take your time to install each bit by bit. Afte some hours of downloading and installing the all addons, orbx and whatnot, I got it working perfect with good FPS 🙂