zabri

Yeah i got it. Thanks for the help.

Hello everyone, I have been searching for a good addon that adds cabin sounds to the aircrafts. I found some like fspassengers and fs2crew. Well fspassengers is too complicated and fs2crew is only for payware aircrafts. Well i have all the freeware aircrafts. Is there any addon that adds good cabin sounds like announcements, safety speech, etc?

As far as i know, i dont think there is specific way for that. By the way all the default airports uses only default moving jetways and not SODE jetways unless you have the GSX Level 2 expansion pack. Some of the addon airports uses SODE and some uses default jetways while some just have a static jetways that does not move. I suggest you to go for GSX Level 2 expansion pack, it adds SODE jetways to all addon & default airports. In this case you will have only SODE jetways in all airports but do watch some videos about the Level 2 pack and do some research before you buy. I just want to give a tip that if you want to find out wether specific airport has SODE jetways.....for example if you want to check for Heathrow EGLL airport. Then go to C:/Programdata/SODE/Xml Inside the xml folder if you see any file of Heathrow EGLL airport that means it has sode... If there isnt then it doesnt....

You are right. Now i just need to assign all AI to land & take off from runway 16 instead of runway 34. I tried changing wind directions, weather, etc. Nothing seems to work. I installed ADE but getting confused on how to change runway assignments. I opened the Melbourne airport. Opened the runways as well as approaches list where i can find runway 34 is highlited with orange colour. I think it means that the runway is active. How do i change that to runway 16?

Yeah, i thought that could be the problem because i had this runway problem with Dublin airport too & it got fixed when i disabled the MTX AFCAD of Dublin airport but Melbourne is not getting fixed that way. I searched about ADE and i think it may work.

Hello everyone, I bought the ORBX FTX Melbourne airport a week ago. Well the scenery is amazing. The problem is not so big. Only thing is i see most of AI land & take off on the runway 27 which is quiet short for the heavy aircrafts or runway 34. Now the runway 34 is fine but i cant find the ILS frequencies for it or maybe it does not have one. Now i am not so good at Visual Approaches especially when its heavy aircrafts. I know that i can request the ATC for runway that has ILS and land on it but it seems unrealistic because i see opposite to the runway an AI is holding its position for take off. Is there a way that i can direct or assign the AI to a runway that i want? By the way i am using MyTraffic 6.

Well thanks for the suggestion but i found the way to increase it through the aircraft.cfg under 'weight and balance' section.

Hello all I am using gsx and most of my aircrafts are freeware. Now when i use gsx and request for boarding i noticed that when i am using B777 or B747 i see two trucks bring 5-6 containers for loading the cargo and even the passengers are nearly around 300. When i am using A330 or B787 i see only 40-50 passnegers on board with just 1-2 containers loading to the cargo which seems unrealistic for the A330 and B787. Now i know that it has to do something with the aircraft.cfg but what exactly needs to be done? Just need the confusion to be cleared.

Thanks for the help. Its working now

Hello all, I downloaded a Jet Airways TDS B737 Max 8. The problem with the aircraft is i cannot pitch up. Well i don't know what exactly it is called but what i am trying to say is when i am on high speed on the runway and when i pull my sidestick/yoke for take off...the nose of the aircraft does not come up. Infact nothing happens and its just keep going and going. Even when i reach 180knots nothing happens...but when it reaches at 200knots the aircraft starts taking lift from the ground just like that without pitch up. At that time when i push the yoke downwards the flight pitches down but does not pitch up. This happens only with the TDS B737 model. I tried with another Spicejet TDS B737 Max 8. Its the same case....is there anything to do with the aircraft.cfg?

Hello everyone, I am using GSX since a month. Now i am seeing something weird that whenever i request for boarding, i see only one cargo loader and sometimes just one catering vehichles too. Well i don't use any payware aircrafts. All of my aircrafts are freeware. I am having doubt wether i have changed a setting by mistake.

Ok i got you. Thanks for the tip.

Well i am new to all these. I love aviation but i am new to the simulation world and Sweetfx is not a payware. If you dont want to help then its fine. I am just trying to get my sim as realistic as possible.

Hello everyone I just installed Sweetfx in FSX. I am reaaly confused and have no idea on how to set it properly. I am using the FX configurator that came with SweetFX. Is there any key for on/off for sweetfx like it is for Enb?

Hi everyone I just bought ans installed T2G Paris airport. I am using FTX Vector too. One of the terminals goes under the ground leving the jetways up. i thought its the FTX Vector causing problem but i disabled the LFPG in the Vector Config and still it occur. I am using MyTraffic 6 so i thought there maybe a BR2..LFPG.bgl file that creates a problem...and so i deleted the file but still it causes problem. Any idea on how to fix? This person had the same problem but i didnt find any solution in the forum.

Hello guys I am using MT6 currently. I was searching for a method to add liveries in it. Altough it contains all the liveries except very few, which is not a big problem for me but was still trying to add liveries. It turns out that there is no such way for MT6 as it is in UT2 and WOAI but i did find some paintkits provided by the develepor himself. Now i have the paintkit but a bit confused on how to create a realworld airline livery. Is there any specific software or program that is designed particularly for aircraft repaints? I tried using a program called Paint.net which was a big dissapointment. Is there any good software?

Well i just need Heathrow. I feel like Aerosoft's version would be better because i just checked the demo of Uk2000 and the performance is really going down. Maybe its because of my specs. I feel like FSX has many complicated stuff like VAS because i have some addon airports that is of larger size upto 1GB and 2GB like Flytampa Sydney and some Aerosoft's version airports that has larger size. They run very well and the performance is good too. At the same time i have some addons of just 100-300mb that lacks performance. Especially 'Delhi' and 'Singapore Changi' from Imaginesim. I think Aerosoft would be good. Maybe they optimize their sceneries to perform well.

Well there is one more addon on the uk2000 website - London City. Does that include Heathrow airport too?

Hello everyone I planned to buy payware sceneries for FSX as i am bored of the freewares. So as the prices are bit expensive for me as i live in India. I thought of buying some world's famous and major airports only. I am a bit confused about Heathrow Airport of London. I could find 2 versions of it. In which the Aerosoft's version has a file of 4GB and my friend said uk2000 version is just nearly 100mb. So that made me alot of confusion. What is the major difference in them? Does they differ in performance? Do the Aerosoft's version include some other buildings or areas nearby the airport? Does the textures quality differ? ????? Well my specs are i5 4460 @ 3.2ghz 8Gb RAM GTX 1050 Ti Windows 8.1 Pro

Well i bought AS16 and its just not connecting with FSX. I have reported the problem is the hifisimtech forums. Hope they find a solution for me.

Hello guys Is there any good addon that allows to choose arrival gate too while flightplanning? Well i did think about Aerosoft Pro Flightplanner but its little complicated for me because of various waypoints, SID, fuel options and more. I dont want all those stuff. What i want is just a proper realistic route and the most important is an option for choosing arrival gate.

Yes i did.....it was written that the installer is for FSX.

After a great research and comparison of UT2, WOAI and MT6, i finally felt MT6 is much better than other in terms of schedules and traffic density. The texture quality is not that good but still fine. There is a small unrealistic thing in MT6. At night times all the AI aircraft's lights are switched on irrespective of wether they are on taxiway or runway or ready for pushback or just parked at the gate. Is there a way to turn off their lights when they are parked and get them on when they ready for pushback?

Hi I am using MT6. Its really good. The thing is some of the aircrafts have old liveries and some liveries are missing. Like Go Air of India is in pink colour which is very old. Now, only the dark blue colour is present. AirAsia India is missing. I ve got the paintkits for MT6 version of A320 that was available on Simflight forum by the developer himself but had got no idea on how to fill the empty white texture with AirAsia India and is it possible to edit the existing Go Air texture to just change the colour from pink to dark blue?

Hello guys I am so upset with AS16. I bought it very happily with excitment but after installation the status up there shows 'Waiting for Simulator' and after a minute everything closes. I rechecked and reinstalled everything by properly observing the paths. I also turned of antivirus and also windows defender. Still no results. Its alway my habit of starting every application by running as an administrator. The worst part is i can't even find anything about AS16 in the addon list on the top. What could be the problem?