Alleusai

Hi, I did a deeper analisys on this issue and (in my case) I've found a workaround. Since ChasePlane was running smoothly some time ago I thought about what changes I had made on my system. Actually a few months ago I had installed AIG AI Manager for AI traffic management, getting rid of UTLive. Looking at the folder structure of the AIGAIM-OCI add-on, I noticed the presence of an Airports folder that contains the scenery folder which contains 7 .bgl files. So I went through these steps: Open P3D On initial screen I chose Add-Ons button and deactivated AIGAIM-OCI add-on, then OK On initial screen I chose Scenery button and checked that the two AIGAIM-OCI items were deactivated Load the sim at any airport with any aircraft Once loaded then closed the sim Open P3D and loaded again Open ChasePlane, flushed shaders and reloaded airports data Now statics views are working again Close ChasePlane and P3D Reopen P3D On initial screen I chose Add-Ons button and activated AIGAIM-OCI add-on, then OK On initial screen I chose Scenery button and checked that the two AIGAIM-OCI items were activated Load the sim at any airport with any aircraft Once loaded then closed the sim Open P3D and loaded again Open ChasePlane, flushed shaders and reloaded airports data Statics views show me a lake/sea/fijord. So, in my case, the workaround is: do not reload airports data in ChasePlane (and may be flush shaders but I'm not sure of this) when AIGAIM-OCI is enabled. A suggestion for a ChasePlane modification might be not to include in the scan the objects in the AIGAIM-OCI Airports\scenery folder (but this is for the //42 developers). Hope this can help! Cheers, Alessandro

Hi all, I'm putting my question here after a try opening two ticket to ChasePlane Support. Mr. Edson C. Soriano says that there is a problem on my side (and I'm aware of it) and all the support they can give is to say "there's a problem on your side". As they should know how the product works I expect them to at least say "try this, check that ...". Instead none of this. I am really disappointed with the quality of the support provided. So here is the problem: I'm on P3D v4.5 HF 3 and last version of ChasePlane (v.1.2.58). I would like to use the static cameras generated automatically by ChasePlane in the airports in order to have the views from the runway starts so I regenerated the airport data then opened P3D. I have chosen a default airport (LIML) and after loading the sim a view of a lake or sea appears on the monitor that has nothing to do with the airport. So, after opening a ticket to //42 support (including the Report File) and received a no help response, I did other tests by randomly taking some default airports around the world (RUCN, LIRN, KPHL, KMEM, ZSPD, RJNK). Before the test I regenerated the airport data in ChasePlane. In all airports the behavior is the same: the static cameras always show a place in the middle of a lake or sea. Since I think the program works (and once it worked for me too) I thought that the problem may be due to something corrupt in the ChasePlane installation so within Orbx Central I checked ChasePlane's files. So I redid the tests but without success. I would like to point out that I activate P3D and Chaseplane too in Administrator mode, the installation folder is C:\Program Files\Parallel 42\ChasePlane (drive C is on a M2 SSD) and that I have set the exclusion on Windows Defender for ChasePlane.exe and C:\Users\<MyUser>\AppData\Roaming\Parallel 42\ChasePlane\ChasePlane_Bridge.exe. P3D is installed in a separate M2 SSD. Also airports data are re-generated after the regeneration. Finally I tried to regenerate the cameras.cfg file getting only the change of view (it looks like a Norwegian fjord). Has anyone had this problem and was able to identify and fix it? Thanks a lot to anyone who wants to help me. Alessandro

Thanks Dave! Alessandro

Hi Dave, I've imported this plan source from Simbrief: LIPE LOMED L12 TINTO Q710 GITRI Z924 KOLUS M603 MOROB LIEA. Simbrief gave FL290 as cruise altitude and P2A set FL 280. If I try to set FL 290 manually it turns to FL 300 so is it impossible to set the right cruise flight level. It's a bug or may I check something in Config? Thanks in advance for any support. Alessandro

Found it! Thank you, Alessandro

Hi Les, I think you've pointed right... so how to disable controller in P3D? Cheers, Alessandro

Hi,I'm experiencing this problem: my cfg is Win10 Home edition last updates, P3D 4.5 HF3, Spad.nExt as inteface for my Saitek Flight panels. I have a second Saitek throttle panel for managing flaps and fuel flow in Flythemaddog X profile.When I use it I see that also yoke is moving. At least I've seen that windows 10 has this device in the control panel/device list. When I remove this device (but after Spad.nExt is running) everything works normally.Anyone has the same problem?Thanks in advance,Alessandro

Hi Dave, unfortunatly my setting for WX refresh interval was set to 15 minutes already. At this point I think that best workaround is to keep open P2A interface in order to read ATC's instruction... However resolving the overlapping could add realism to simulation so I hope to see it in a future release. Thanks again, Alessandro

Hi Dave, thanks for your answer. I don't use ATC Chatter feature (please see the screensho I've send to admin@pilot2atc.com). Overlapping is very annoying expecially when connected to very crowded ATCs. May be something wrong in my config or installation? Thanks in advance, Alessandro

Hello All, I'm a very new Pilot2ATC user and I find it truly exceptional. I use P3D 4.5 HF3 and UTL 1.2. I have done some IFR test flights and during the approaches (but on ground also) I have noticed that often the communications of the AI traffic with the controllers overlap with mine or that of my co-pilot so it is difficult to understand the instructions. Is this normal behavior or do I need to change any settings? Thanks in advance for any suggestion. Alessandro

Hi all, I wish to create custom FIP gauges on P3DV4. As I'll start from zero I'm searching for some how-to docs. I've found something interesting on developing custom FIP gauges on X-Plane but nothing about P3D. I have SPAD.neXt registered version and I think I could use it for building new gauges. Kindly someone could give me any suggestion? Thanks in advance, Alessandro

Hi, I'm trying to configure a SPAD.NeXt profile for MadDog X (P3D 4.3). Setting frequency from simulator Vhf knobs works well (same digits on both simulator and panel and when I set frequency on sim on panel is updated in real time). Not the same when I use panel knobs: digits change on panel but not on sim. I'm using COM STANDBY FREQUENCY:1 (SimConnect) or md_ipc_com1_stby_freq_mhz (LVAR) with no luck. Any hint or suggestion? Thanks in advance, Alessandro