40track
-
Content Count
292 -
Donations
$0.00 -
Joined
-
Last visited
Posts posted by 40track
-
-
14 minutes ago, Area said:Hello,
When I do this action, the MCDU returns "AOC SEC F-PLN UPLINK" but I no longer have the import of the Simbrief flight plan (EFB does have the flight paln).
You would click the sec flt plan button again and then LSK R3 to Activate.
In Simbrief there's now for the A320 category CFM and IAE versions of the A320.
-
2 hours ago, Bunchy said:On the INIT page on MCDU click LSK R2, that should import simbrief plan.
Bunchy, Dad showed me how to do it through the EFB then through the LSK R2 as always. Only thing that tripped me after was the PERF button to activate the data that was missing for ILS to work.
-
13 minutes ago, DAD said:It's in the EFB, click the setting app on the EFP then you can enter your simbrief user ID...
With Block 2, the Simbrief username has now been moved to the EFB > Settings app.
does anybody read the knowledge base at all 😕
Omg Thanks.
- 1
-
1 minute ago, DAD said:importing from simbrief was and still is tricky. I strongly suggest to check some tutorials on youtube. a quick search on Fenix' KB was not too successful except you start from INIT Request
https://kb.fenixsim.com/i-received-aoc-sec-f-pln-uplink-after-init-request
Then you need to count to 3 or even 5 and then select SEC F-PLN on the MCDU and click import (IIRC) and then ACTIVATE... enroute now so cannot check until landed in some 30-40min from now 🙂
Thanks. Just flown yesterday now no pilot id anywhere to enter not even in the app.
-
2 minutes ago, 40track said:Many thanks.
Ok doesnt show up.
-
1 minute ago, Fiorentoni said:INIT A page in the MCDU, request flight plan on the right side (or whatever it is called).
Many thanks.
-
Silly question. How do you import the FlightPlan into the mcdu from Sim brief?
-
On 11/5/2023 at 5:59 PM, captain420 said:Thank you so much! How did you manage to find those values?
Late reply to this. He would have found the 3 numbers Hex on left and Decimal value in the Single (float32) line in the Data inspector tab on the right of HxD this after search for text strings regarding the Sky effects if you're wondering how he did it. Technical stuff absolutely, now you know.
-
Ive not seen the uft update in the marketplace 737 700. For those with the uft can it be hidden or disabled and just rely on the good old FMC?
-
2 hours ago, bobcat999 said:Steam normally downloads just the files it doesn't like the look of when you verify them, not all of them, but as you say, this new method avoids all that.
Never knew this. Always think the worst case scenario in case it does happen 😉
Addons arent an issue thankgod.
- 1
-
1 hour ago, turbomax said:only 48 more hours until SU14 beta, then it will not be necessary any longer.
For our sanity hope its injected.🙂
-
1 hour ago, Daube said:Did you miss the info? Editing the exe file is not necessary anymore.
Yep unforrunately late to this. Posters corrected this with the mod. Yeah this could seriously mess up the Steam verify system which would result in a complete redownload.
-
So theres a better way. Thanks for that.
-
Anyone who still wants the tutorial on how the Steam version is edited from the YouTube video source.
Copy the .exe from Program Files(x86)/Steam/Steamapps/Common folder to desktop.
Open HxD64
Open Search Replace menu.
Open Floating point tabSelect search direction to all for value 1 and 2 Value 3 use forward direction.
Change First value from 0.00065 to 0.00508
Change Second value from 0.001881 to 0.00318
Change Third value from 0.000085 to 0.0Then save to the desktop version making sure you've backed up the original.
-
Try reflex low latency mode
-
Not really related to this however not only can you use hxd64 for this exe file hack you can use it for the cgl files to remove the white boundary around city and airport sceneries (Forgive the non technical explanation of the effect).
Just open the hxd64 and drop the cgl file in Select all Then in fill selection option enter 00 in hex-value and save.
Remember to backup the cgl files.
- 1
-
7 hours ago, Shack95 said:I had to do a clean install of my Windows the other day and now I‘d like to reinstall MSFS. Since I still have all of my MSFS files on a separate drive, I‘d like to do this without having to redownload everything. Does anyone happen to know how this can be done?
For ms store version just open xbox app then install the 2gb Executable in the c drive then play/run and once the install shows the amount of imstall size click on text string and point that to the folder with community and official in it.
Steam you have to setup the location of the drive of the steamlibrary make it default drive and then do the same as ms store (installer in c drive) and when the installer askes to install size again click on text string and then in this csse point to Steamlibrary/common folder
Hope that makes sense.
- 4
-
Just dont jump at using the steam version like i did. Issues with one DLC addon airport in Steam whereas the store version just works.
- 1
-
10 minutes ago, carlanthony24 said:Panel states will not be a thing. If I remember Dave did say it would require a large amount of code which could easily break the plane.
Oh ok thanks. Understandable.
-
A319 for the win like the A320. Would anybody know if the cockpit will have a ready or saved state for us that just want to load up then put in the FlightPlan and fly in V2? At the moment i just load fuel in the weights etc icon whilst the displays powerup then do the rest. Sorry to bother with this question if no one knows or have a idea.
-
9 hours ago, John Snyder Jr said:I want to delete all the aircraft that I never fly or never will in MSFS but I can't find where the aircraft files are located. I have the Store version. Any help would be appreciated! Thanks guys!
Official/OneStore/asobo-aircraft-c152 all the way down to asobo-aircraft-tbm930 and maybe further if youve got more added.
Open simObjects/Airplanes folder then the folder name of the airplane ie asobo-Generic-(name of aircraft)
Then open aircraft.cfg with notepad
change
isAirTraffic = 1 ; airtraffic flag for variations
to
isAirTraffic = 0 ; airtraffic flag for variations
Remove everything else in content manager before doing this then reboot and run sim and exit to save any new info from content removal. There is a possibility of update failure from then on so backup your Main folder with community and official sub folders that reside in it offline somewhere.
-
3 hours ago, 1st fltsimguy said:OK. Help is needed, please.
I corrupted my Win10, while doing electrical work on some lighting in my house. Nothing that I could do to fix my Win10, after trying about 20 web based solutions.
I gave up, did a Win10 reinstall. Which wasn't too bad really, it cleaned up a lot of mess from over the years. However, I'm left with reinstalling programs.
All my old data is saved in a fold called Windows.old...in it, I see all my MSFS base program and my links to Add-on Linker.
I copied this data to their exact locations as they should be.
But then I realized I had no means to launch the sim. I went to the MS Store (which is in itself a nightmare from elm street). I located and tried to install the sim from there, where is says "you own this program"...the installation doesn't work, I tried several times...then I searched online for solutions to get the store to let me install the game.
Hopeless! To put it mildly.
Has anyone got experience with this? Know how to get the program back on a system?
Bryan
Run the XBOX app and see if its installed in it. Run it and you'll see a directory string then click on it and point to where you had the original folder with the 2 sub folders community etc. in it. I'm sure someone else would have a better idea though.
-
-
27 minutes ago, St Mawgan said:I guess if you've figured out how to install the sim then no instructions necessary.
Msfs steam version won’t stop running after exit
in Microsoft Flight Simulator (2020)
Posted · Edited by 40track
Gave up. Full format and reinstalling the entire sim from scratch now. Kept running kept trying to update etc.