Jump to content


  • Content Count

  • Donations

  • Joined

  • Last visited

Everything posted by ADFGVX

  1. Many thanks for that, do you have a link for the fixed gauge?
  2. Does anyone know how to integrate the GTN 750 (but ONLY the 750 without the 650) into the Milviz PC 6, because so far I only had failed attempts even messing up the plane so bad I had to reinstall ( I only blame myself here to be clear)
  3. In a video from "Captain Mac" I think I spotted it, a faorly large red handle but I can't seem to find it in my cockpit
  4. Now that Milviz gave a bunch of aircraft away for free I finally tried their KA350i, after a few frustrating hiccups (I found out I very unfortunately had to disable WXR to avoid the inevitable CTDs) I think I got it working now, but one thing that bothers me is the alternate gear extension placard, which is quite prominently visiable in the VC standard view, is this actually modeled, I read that it was but cannot seem to click anything
  5. It seems to work now. I just tried it again. But thanks for the help !
  6. Thanks for the tip, but the version still won`t update
  7. I used the GTN FltSim.exe, which atomatically recognized there's a new installer, the process went well it seemed, but apparently the update was not properly installed. I tried it three times.
  8. I just encountered a strange but decisive problem: I tried updating to Ver but looking in the log during flight (beacuase the AP was not working) it stated I still had Ver
  9. Here's the gau.log,it says AP not supported: 22/04/23 15:58:14.151 06044 - ] # rxpGTN.dll version 22/04/23 15:58:14.151 06044 INFO ] 22/04/23 15:58:17.010 06044 WARN ] Autopilot not supported on this platform (vers:
  10. I recently updated the sim to version 5.3. All of my A2A GA aircraft have the GTN 750 equipped, and it worked perfectly fine in 5.2. Today I decided to take out the A2A Bonanaza out for a quick cruise, for the first time in 5.3. But unfortunately I had to find out that the GTN did power up as it should and load the FPLN correctly, however the aircraft does not follow the fligthpath. The AP of the Bonanza seems to work in general, meaning it can be switched on and all other modes esxcept NAV are followed correctly by the aircraft.
  11. Yes I agree wholeheartedly, the 2D panels indeed look nice, but to clarify: your 3D overhead looks the same as in my picture, because then it has something to do with P3D v5, as I have, like I wrote in a previous post, seen a video where the plane was flown in P3D v4 and the textures were just so much better.
  12. https://imgur.com/a/r0w5jF9 This is how it looks like, at least I got the CB panel aligned correctly now.
  13. Hey I've got another question, the overhead textures in the DC 9 seem quite blurry, now that I've seen some videos where this is not the case I have to ask: Is there some kind of texture pack, does this have to do with P3D? Also, I have discovered that the 2D circuit breaker popup panels seem to be skewed
  14. One question about the interactive tutorial (I am going through it right now) , is there a way to turn off those 2D panels popping up? It was quite helpful for the before start items but now at takeoff it's not exactly pleasant. And also: How does the AT work?, because clicking the handle does nothing
  15. Hey, that's really nice to hear. I might buy it now!
  16. I recently discovered the Coolsky DC 9 and have to say I really find this plane quite intiguing. So my questions are: Is it compatible with P3D 5.3 ( I have seen some posts confirming compatibility with P3D v5 but it was longer ago, so it could not have been 5.3) Is the overall realism compararble/better than the Maddog X (flight model, failures/wear&tear) ?
  17. First of all, thanks for the reply. I tried it without my joystick just before I wrote the last post here.. no luck
  18. So , I figured after having tried the suggested things I report back on how it went, I know it's been quite a while. Unfortunately nothing has changed, with the same really annyoing ever changing pattern
  19. Hi, I just wanted to let you know all is fine now and thank you for the responses. Great product!
  20. GTnSim.ddl.log 22/01/15 20:00:17.499 02760 - ] # rxpGtnSim64.dll version 22/01/15 20:00:17.498 02760 INFO ] 22/01/15 20:00:18.767 00172 INFO ] GTN 750.1 - TRAINER 6624 22/01/15 20:00:18.774 00172 WARN ] GTN 750.1 process is running as-admin 22/01/15 20:01:45.835 00172 INFO ] GTN 750.1 - TRAINER 6624 22/01/15 20:01:45.842 00172 WARN ] GTN 750.1 process is running as-admin 22/01/15 20:52:36.614 00172 INFO ] GTN 750.1 - TRAINER 6624 22/01/15 20:52:36.620 00172 WARN ] GTN 750.1 process is running as-admin GTN.gau.log 22/01/15 20:00:15.533 02760 - ] # rxpGTN.dll version 22/01/15 20:00:15.532 02760 INFO ] GTN_menu.dll.log 22/01/15 19:34:50.995 17440 - ] # rxpGTN_menu.dll version 22/01/15 19:34:50.996 17440 INFO ] edit panel: F:\p3dv5 addons\A2A\SimObjects\Airplanes\A2A_C182\panel\panel.cfg 22/01/15 19:35:50.411 13220 INFO ] 22/01/15 19:35:50.411 13220 INFO ] edit panel: F:\p3dv5 addons\A2A\SimObjects\Airplanes\A2A_C182\panel\panel.cfg 22/01/15 19:36:51.128 08776 INFO ] 22/01/15 19:36:51.128 08776 INFO ] edit panel: F:\p3dv5 addons\A2A\SimObjects\Airplanes\A2A_C182\panel\panel.cfg 22/01/15 19:37:35.211 05320 INFO ] 22/01/15 19:37:35.211 05320 INFO ] edit panel: F:\p3dv5 addons\A2A\SimObjects\Airplanes\A2A_C182\panel\panel.cfg 22/01/15 19:39:03.227 01676 INFO ] 22/01/15 19:39:03.227 01676 INFO ] edit panel: F:\p3dv5 addons\A2A\SimObjects\Airplanes\A2A_C182\panel\panel.cfg
  21. I've bought the GTN 750 yesterday and so far it unfortunately has been very rough. After I had to install it four times (reaons were:first no databaseses, then twice a black screen, when it finally workedafter installing it the fourth time, at least it did turn on and load the DBs). Also, the Garmin Trainer launcher is very poorly done IMO, which has made things even less pleasant for me. I now installed the GTN in the following A2A aircraft: Bonanza,Comanche, C 182 Skylane, the issues are the same for all three: The flight plan is loaded correctly but the AP isn't following the course at all, instead the aircraft starts flying a circle or just in a random direction, the AP ITSELF is not working at all: That means it will not capture or hold an altitude, not follow HDG in HDG mode or even hold pitch/roll while enabled. Since I have flown these aircraft prior to GTN integration I can only assume this issue is realted to the GTN as well. Also, the GTN trainer app has an infinite loading circle on the 'Avionics' page, which I do not know what to make of Logfiles:
  22. Thanks for your reply, yes I see its a very uinque (in the worst possible way) issue, and I am sure if it was for a easy determinable cause I would have fixed it myself. The thing that left and keeps leaving me puzzled is that it all came out of nowhere, at a point where the last change I made ( and by that I also include things as harmless as changing the volume) was at least two weeks ago, so IMO it shoud have happened sooner, like that there is simply no correlation
  23. 1) I dont have any AV excpet the stock Windows Defender, so I doubt there are any conflicts 2)I just updated to a new game ready driver, and,as if P3D wanted to hit me in the face, the view change happened after 5 min in sim. Windows is also up to date. 3) The only peripheral hardware elements I use are mouse, keyboard and joystick (logitech extreme 3d pro, so no fancy and complex setup which demands meticulous configuration), also no chaseplane and the like I want to apologize for my remark above, at that moment I was just really frustrated as the issue is plaguing me since two months and sometimes stays absent for whole sessions,giving me false hope
  • Create New...