albarelys

where I make a mistake, you see some wrong setting, can you help me

Hi, thank you for redoing the .exe file for debug ,to check what the problem had been, but that night I decided to format the hard disk and I reinstalled everything starting from windows arriving at the simulator, then due to work I had to go away and I came back only yesterday, now I have installed some liveries and airports and I'm checking. Now it works fine and all airports are lined up correctly. I have no idea what the problem was, now I will continue to install other airports and check if one of them causes the error to reoccur. In this case I will open another ticket for you and we will see through debug what the error is so we report it to whoever is responsible. I thank you for the help and the time you have dedicated to me. One thing only, I have a doubt and maybe I remember wrongly, but when the airplanes moved from the gate to take the direct taxi for departure they moved with the help of the taxi van or do I mismatch myself? Thanks again for your software which I love 🙂

Who knows where this problem comes from, after reinstalling everything I left the comunity cartridge empty, so the sim is installed as if it were new and keeps giving me this error. As they say in these parts "I turn the boxes" because this joke does it only in a few airports, too bad they are the ones I use the most otherwise I would not have noticed, but I would like to solve the problem because your mod is among those that the more I like them. thanks for the answer and the test you did, I just have to format the entire hard disk, but if I don't understand what the problem is and it comes back I can't format the ssd again, it would become a bit long as a thing .. .. 🙂

UP Help, I reinstalled everything again (steam and simulator), but everything is the same as before, any help? Can anyone try Turin LIMF airport and check if they get the error?

Hi, yes, both Limf (Turin) and also MROC (Juan Santa Maria in Costa Rica) are available in the file, which I noticed have the same problem. The one in Turin with the coordinates written <airport code = "LIMF" iata = "TRN" lat = "45.2025" lon = "7.6494" alt = "958" /> which are correct, MROC is also inserted in the file and has the correct coordinates. Turin with google maps .. https://www.google.com/maps/place/45°12'09.0"N+7°38'57.8"E/@45.1921428,7.6378865,14.5z/data=!4m5!3m4!1s0x0:0xe0be365e8bf1acf0!8m2!3d45.2025!4d7.6494 Juan Santa Maria in Costa Rica Google Maps https://www.google.com/maps/place/9°59'38.0"N+84°12'32.0"W/@9.9899954,-84.2224955,14z/data=!4m5!3m4!1s0x0:0xb9b05f8b89b1efc7!8m2!3d9.9939!4d-84.2089

Hi, I didn't specify that it was from third parties because I have many others and they all work perfectly, even this one offending now until a couple of days ago worked very well, so much so that I enjoyed the passages of real airplanes that passed over my head and I compared them with the simulator. I'm not sure if it was after I installed the new version of Psxseecon, because more than anything else I fly in vfr with small airplanes and I start from small airfields, this is my deduction as the only change I made in the week of files it was with the program itself that is now giving me problems only with this airport. The airport in question is in the same place (community folder) together with others that still work perfectly now, for other airports I use the addons linker and even those work perfectly for me, now while I write and test I am watching the live video of the KLAX airport of los Angeles comparing what I see on the simulator and it is perfect, a little while ago I was checking the one of Rome and Milan Malpensa and even there I did not notice any problems, so even if I think that there are no routing problems through the software you I link mine so you can see if you run into any problems. I have never used the afolder0 parameter to set a full path because it has always worked for all the airports I use or have used. The only thing I noticed today is that the main program files with its sub-folders are located in 😄 \ PSXT_MSFS, instead the parameters.xml file is located in another folder (C: \ Users \ xxxxxxx \ AppData \ Roaming \ PSXT_MSFS). the only thing I still remember doing is using the Learner program setting LIMF as arrival airport, I don't remember exactly what and how I did it, but maybe I tried to do that action. I am testing other airports and I have found that the same error happens, (put an airport close for example also to the MROC that exchanges it for me with MSRN also this (MROC I have used it previously and I had no problems and I was also seeing traffic from GA Instead, the RealTraffic program reads airports and traffic perfectly, but is not injected into the sim by the Psxseecon that "misses airports" What I can do is check if I find others, in order to compare them and understand the problem 6590 Liveries 16417 stock 535 addons airport

I forgot to mention that I use a third party addons for Turin LIMF airport. Now I have deleted it, I have also deleted all the contents of the addon_airports folder. Now PSXseecon Traffic always reads me LFLJ, and RealTraffic as previously recognizes Turin and in fact is showing traffic near Caselle Torino LIMF. So using the turin stock too, the error is always the same. Then I did another test and I almost totally deleted the community folder (I left only airplanes and some addons like bijan) and I went to LFLJ, it reads it to me correctly. Then I also deleted everything concerning Ivao and Vatsim but the situation has not changed. Is there anyone who can try if you also LIMF gives you this problem? At least not to go crazy on my part to understand what it is, because now you can almost say that I have a clean installation of the simulator and I don't know where and what I could go to modify. Now as xml x LIMF file I am using yours at the moment that I downloaded along with many others for stock_airports I don't understand what happens, until a couple of days ago it worked perfectly. What could I do to reset everything and reinstall again like it was the first time? Is there any hidden file around maybe to be deleted manually that the unistall program does not delete?

Hi, yes I also had Limf in the file, I had downloaded and used your file because it gave me error 44. Now I have deleted the file and I have been recreated the empty folder but now it gives me error 44 again. The first few times (older versions) I didn't even get error 44 now anything that does error 44 always comes to me (even following the manual) error 44 goes away only if I follow the faq n ° 27 that you gave me reported now. now I have ripovarto to reload your file but it gives me lerroer than before and I read that I am in another LFLJ airport.

Hi everyone. Have a nice day 🙂 I have had a problem for a couple of days, maybe since I installed the new version of PSXT or maybe after, however I only realized it yesterday. I encounter the problem only in one airport, in that of Torinon, icao code LIMF. It has always worked well but now when I load the PsxSeencon software in the bar below instead of being written LIMF, another Icao code came out, LIBU. I went to look for the xml file and I deleted it thinking of an error in that airfield made by third parties, now I get the code of another airport, that of LFLJ (courchevel), which could it be? how and where can i fix the error? In this way I cannot have traffic on Turin LIMF and I think it is loaded on those airports I am not flying on

[atc_id = "‎‎" ; tail number ? So it's not possible to use a single livery for more than one model type? or can you fill in this way in that place as well? or [atc_id = "‎‎EI-EIA;EI-DTO;EI-DTN;EI-DTM;EI-DTL;EI-DTK;EI-DTB;EI-DSW;EI-EIC;EI-IKU;EI-IKF;EI-IKB" ; tail atc_parking_codes = ITY OK without the double commas? and in to file regcode only for example AIGAIM_Airbus A320 Neo ITA Airways real It's ok ?

Hi, I'm doing the livery work (why did you close the other thread?), It will be a bit long because I want them to have the correct tail code for each airplane, this way the work is longer but it will be better 🙂 attached a first livery of the new Alitalia (ITA). Having said that, I am trying to insert the liveries that I use during piloting or that are downloaded from the various sites and I follow the instructions in the manual starting from point 5.1. But I think I am doing something wrong because the liveries are not visible and everything remains as before. I specify that I have installed the new PSXseeconTraffic. What I did was prepare a txt sheet like this AIGAIM_Airbus A320 Neo ITA Airways real;EI-EIA;EI-DTO;EI-DTN;EI-DTM;EI-DTL;EI-DTK;EI-DTB;EI-DSW;EI-EIC;EI-IKU;EI-IKF;EI-IKB AIGAIM_Airbus A320 Neo ITA Born in 2021;EI-EIB AIGAIM_Airbus A320 Neo Alitalia 8K;I-BIKO;I-BIKA;EI-IKL;EI-IKG;EI-EIE;EI-DTH;EI-DTG;EI-DTA;EI-DSU;EI-DSG Or do I also have to enter the icao code of the airline? AIGAIM_ITY Airbus A320 Neo ITA Airways real;EI-EIA;EI-DTO;EI-DTN;EI-DTM;EI-DTL;EI-DTK;EI-DTB;EI-DSW;EI-EIC;EI-IKU;EI-IKF;EI-IKB AIGAIM_ITY Airbus A320 Neo ITA Born in 2021;EI-EIB AIGAIM_ITY Airbus A320 Neo Alitalia 8K;I-BIKO;I-BIKA;EI-IKL;EI-IKG;EI-EIE;EI-DTH;EI-DTG;EI-DTA;EI-DSU;EI-DSG NAME TITLE ICAO CODE AIRLANES TAIL CODE and put it in the REGCODES folder. is this enough or am I missing some steps? The liveries can be found in the comunity folder. For example, I also put an aircraft.cfg code to compare perhaps with what I insert in the txt file, [VERSION] major = 1 minor = 0 [VARIATION] base_container = "..\Asobo_A320_NEO" [FLTSIM.0] title = "Airbus A320 Neo ITA Airways real" ; Variation name model = ""; texture = "ITA Airways real" ; texture folder ui_variation = "ITA Airways real" ; e.g. World Air, IFR Panel atc_airline = "ITA Airways" ; airline name atc_id = "‎‎" ; tail number ui_type = "A320 Neo" ; e.g. 747-400, 172 ui_typerole = "Commercial Airliner" ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc ui_createdby = "Asobo Studio, Albarelys" ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc atc_id_enable = 0 ; enable tail number atc_flight_number = "001" ; flight number atc_heavy = 1 ; heavy? atc_parking_codes = "" ; Comma separated and may be as small as one character each isAirTraffic = 0 ; Is the plane usable for air traffic [FLTSIM.1] title = "Airbus A320 Neo ITA Airways AI" ; Variation name model = "AIMAIN"; texture = "ITA Airways real" ; texture folder ui_variation = "ITA Airways real" ; e.g. World Air, IFR Panel atc_airline = "ITA Airways" ; airline name atc_id = "‎‎" ; tail number ui_type = "A320 Neo" ; e.g. 747-400, 172 ui_typerole = "Commercial Airliner" ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc ui_createdby = "Asobo Studio, Albarelys" ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc atc_id_enable = 0 ; enable tail number atc_flight_number = "001" ; flight number atc_heavy = 1 ; heavy? atc_parking_codes = "" ; Comma separated and may be as small as one character each isAirTraffic = 0 ; Is the plane usable for air traffic I don't know if something is missing or I put wrong information. if you can take a look, I'd love to.

[FLTSIM.0] title = "Asobo_A320_NEO_ITA Airways real_EI-DTE" ; Variation name model = ""; texture = "ITA Airways real" ; texture folder ui_variation = "ITA Airways real DTE" ; e.g. World Air, IFR Panel atc_airline = "ITY" ; airline name atc_id = "EI-‎‎DTE" ; tail number ui_type = "A320 Neo" ; e.g. 747-400, 172 ui_typerole = "Commercial Airliner" ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc ui_createdby = "Asobo Studio, Albarelys" ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc atc_id_enable = 0 ; enable tail number atc_flight_number = "001" ; flight number atc_heavy = 1 ; heavy? atc_parking_codes = "" ; Comma separated and may be as small as one character each isAirTraffic = 0 ; Is the plane usable for air traffic [FLTSIM.1] title = "Asobo_A320_NEO_ITA Airways real_EI-DTE AI" ; Variation name model = "AIMAIN"; texture = "ITA Airways real" ; texture folder ui_variation = "ITA Airways real DTE" ; e.g. World Air, IFR Panel atc_airline = "ITY" ; airline name atc_id = "EI-DTE‎‎" ; tail number ui_type = "A320 Neo" ; e.g. 747-400, 172 ui_typerole = "Commercial Airliner" ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc ui_createdby = "Asobo Studio, Albarelys" ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc atc_id_enable = 1 ; enable tail number atc_flight_number = "001" ; flight number atc_heavy = 1 ; heavy? atc_parking_codes = "" ; Comma separated and may be as small as one character each isAirTraffic = 1 ; Is the plane usable for air traffic quello sopra è un copia e incolla di un Aircraft.cfg vedi degli errori da combinare con quanto scritto sopra ?

Hi, if you are the only developer doing the work I renew my congratulations to you. Question, I am a graphic designer but not a developer or anything, there is my son who is studying these programming things but at the moment I want to let him calmly follow the school. Having said that, let's say that I have created 3 liveries, how can they be associated with more airplanes of the same airline that have these three liveries? for example I am Italian and I started with those of the old Alitalia which would be ITA. EI-EJL It has a livery of a style EI-DSX, EI-IMI and others have another livery done in another way EI-DTO and others have the new Ita livery icao code (ITY) All the old and new liveries have passed under ITA Airways how do you associate the liveries? is it something that once I have turned your liveries on you think about your program? After having done the livery do I have to insert it in aig? AIGAIM_ITY ITA Airways Airbus A320-200; EI-DSX, EI-IMI then do other lines with other codes like for example this? to put other liveries how should I do on the same ITY carrier with the same type of aircraft? I have to insert these lines in: In the regcode of the subfolders of the data folder? If yes ... how should I do it exactly so that I get to work and then accept requests for those who want to insert other liveries that I can do in my free time

Hello everyone, I recently (three days) discovered this software that coupled with real traffic I find it beautiful, with some problems but I find it truly spectacular and I congratulate the developers. In my small chance I would like to help with codes and work with liveries. Once the livery is done and the correct tail code is put in aircraft.cfg what should I do to get the community to share these airplanes? I read that aig does not allow you to use its liveries but I realized if I'm not mistaken (I want to understand before accusing) that they use ours, for example the EI-WLA I made it. Having said that it is not that I care that much, how can I do to share the liveries, I can maybe through a form see which ones to do, of those you need. a question if I put it in my community folder I'm fine, but how can I do to let you have my work, and how can I report that that plane has the correct livery? I want it for me to be as perfect as possible, but I'd like to share the work 🙂

Hi, I have a question about real traffic. Aig does not have the liveries of ITA Airways, the new Alitalia (to understand), do you know if using this is solved in any way? if there is the possibility to add them manually or else? using this software in conjunction this software with https://rtweb.flyrealtraffic.com/ the lack of liveries is resolved if they are present in comunity folder ?